IMPRESSIONS Clarity User manual
LED MAKEUP MIRROR
ALWAYS READ THE INSTRUCTIONS CAREFULLY BEFORE USING.
1) Do not mix batteries of different types, chemistry, brands or age.
2) Clean battery compartment and remove debris before battery
installation.
3) Insert batteries accordingly as indicated or use the provided USB cable to
connect to a power source
4) Remove batteries if mirror will not be used for an extended
period of time to prevent possible battery leakage.
5) Remove all old batteries and replace with all new batteries.
6) Dispose of batteries properly.
WARNING
INSTRUCTIONS FOR USING CLARITY LED MAKEUP MIRROR
WITH TOUCH SENSOR:
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USING
• Do not disassemble or refit the products.
• Do not place or store mirror where it can fall or be pulled into a tub
or sink. If the appliance falls into water, DO NOT REACH INTO THE
WATER!
• Do not place the product in wet environments in case of
damage to the battery.
• Keep the mirror dry during daily use.
• Turn off the power before cleaning. Use the mirror after it is
completely dry.
• Turn off the power if not used or stored for a long period of
time. Keep it away from children’s reach.
• Avoid prolonged direct sunlight.
• Make sure that the voltage rating of your power source is compatible
with the mirror.
• Do not place the product near or into heat sources to avoid
explosion or fire.
• Stop using immediately if abnormal conditions occur ClarityClarity
MADE IN CHINA
RM288 CLARITY LED MKUP MIRROR MANUAL.indd 1RM288 CLARITY LED MKUP MIRROR MANUAL.indd 1 3/24/20 5:54 PM3/24/20 5:54 PM
High definition LED makeup mirror
This lighted makeup mirror uses built-in Energy Saving LED bulbs.
Built in touch sensor switch
Up and down 45 degree rotation
Insert A into B,
then align B and C
Make sure 4 AAA batteries
are installed properly or USB
cable is connected correctly.
Tap your finger on the power
switch to turn ON the circular
LED light.
Hold down your finger for 3
seconds to adjust brightness.
Tap your finger on the power
switch to turn OFF the mirror.
Insert B into C
on the base
Gently turn the stand
counter-clockwise
When you hear a
sound lock, the
mirror is well
assembled for use
1) Turn switch to OFF position.
2) Be sure direct sunlight does not strike mirror when left
unattended.
3) Allow to cool to room temperature before storing.
4) Place in cool, dry area out of reach of children, where mirror
will not be damaged.
LED Makeup
Mirror
USB Charging
Cable
Instruction
Manual
SPECIAL FEATURES: HOW TO ASSEMBLE:
OPERATING INSTRUCTIONS:
WHATS INCLUDED:
STORAGE INSTRUCTIONS:
RM288 CLARITY LED MKUP MIRROR MANUAL.indd 2RM288 CLARITY LED MKUP MIRROR MANUAL.indd 2 3/24/20 5:54 PM3/24/20 5:54 PM
