Infinea mPOS User manual

ABOUT YOUR INFINEA® MPOS CHARGING STATION (1-Unit)
ASSEMBLY
Infinea®mPOS
Charging Station
(1-Unit)
QUICK START GUIDE
CHARGE STATUS TROUBLESHOOTING
mPOS
Cooler Vent
Standard
Attachment
LED Indicator
mPOS
Insert iOS screen
face foward
mPOS Flat
Flat Attachment
mPOS Flat
Insert Keypad face
forward
Charging Contacts
1. Place the Infinea mPOS Charging Station
on a sturdy, clean and dry surface in an
open, well-ventilated area away from
direct sunlight.
2. Insert the USB plug into the USB port on
the charger. Connect the other end of the
USB cable to a PC USB port or USB 5V
power adapter.
3. Insert the Infinea mPOS unit into a
charging bay, ensuring that the battery
contacts are aligned with the bay’s
contacts. The LED will light up to provide
the charging status.
The Infinea mPOS Charging Station uses the
following LEDs to indicate the charge status:
STATUS INDICATOR LEDS
Green Inserted device is fully charged.
Orange Inserted device is charging.
No LED Indicates there is no device in
charging bay or there is no power
supply attached the charger.
The LED does not come on when the Infinea
mPOS is inserted into the charging station.
• Ensure that the USB cable is securely
inserted into the USB port on the charging
station and connected to the PC USB or
USB 5V power adapter
• Ensure the unit is seated properly in the
charging bay
It takes an excessive amount of time to fully
charge the battery.
• Verify ambient temperature meets the
operating temperature requirements
Operating: 0°C – 40°C (32°F – 104°F)
USB Port

Please visit our website at ipcmobile.com,
or contact your Infinite Peripherals account
representative, for additional information about
our current and future product accessory
oerings.
ACCESSORIES
Mobility Sales/Technical Center
Infinite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: [phone]
Office: [phone]
Headquarters/Main Warehouse
Infinite Peripherals, Inc.
2312 Touhy
Elk Grove Village, IL 60004
Toll-Free: [phone]
Oce: [phone]
Fax: [phone]
Technical Support
Infinite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: [phone]
Office: [phone]
Email
[email protected]
Website
ipcmobile.com
•
Note: Box contents and part numbers may vary based on order config-
uration.
Infinite Peripherals does not warrant, and is
not responsible for, any damage to the Infinea
mPOS Charging Station (“Product”) as a result
of liquid or solid particle intrusion into the
Product or damage caused by dropping the
Product. If a material or workmanship defect
arises with regard to any Infinite Peripherals
product, and a valid claim is received within
the Warranty Period, Infinite Peripherals (at
its sole discretion) will (1) repair the Product
using new or refurbished parts or (2) replace
the Product with a new or refurbished
Product. For purposes of this limited warranty,
“refurbished” means a product or part that
has been substantially returned to its original
specifications. In the event of a defect, these
are your exclusive remedies.
QSG-10005 REV. B
WARNINGS & CAUTIONS
Please observe the following precautions:
• Do not immerse the charger in water.
• When not in use, store the charger in a
cool dry place.
• Do not store or operate the charger near a
heat source.
• The charger is information technology
equipment and for oce use only, and
should only be used for its intended
purpose.
ADDITIONAL INFORMATION
Please contact your Infinite Peripherals sales
representative for technical specifications and
additional product documentation.
WARRANTY
PRODUCT RETURNS
Vist our online support center at https://
ipcmobile.com/support/rma. Use the link
provided to create an account and gain
access to our Knowledge Base and online
support services. Through our online support
center, you’ll be able to download files, open
a Support Ticket, manage your RMAs, view
your account Profile and subscribe to Alerts.
To Request a RMA:
1. Create a user account in the RMA
Support Portal at https://
ipcmobile.com/support/rma.
2. Login to your user account and click on
the the “Open a New RMA” option.
3. Read the instructions provided and
complete the online request form.
4. Note the assigned RMA number and
write it clearly on your shipping carton.
5. Ship your equipment back to us at the
address provided.
Specifications subject to change without notice. Infinite Peripherals,
Mobilize Your Enterprise, Linea Pro, Infinea, Infinea Tab and Infinea
Omni are trademarks of Infinite Peripherals, Inc. All other trademarks
are the property of their respective owners.