INFINOVO MEDICAL Glunovo p3 CGM User manual
p3 CGM
Quick Start Guide
Insert Sensor
1. Choose Sensor Site
Choose a sensor placement site on
the abdomen
Clean the site with alcohol wipes and
let the area dry completely
•5 cm away from the belly button
•5 cm away from the insulin injection site
•Avoid fatty cloting site, tattoos, scars
•Shave the spot if it’s hairy
Do not use if the package is damaged or expired!
2. Remove the Protective Liners
Press the sensor on one side
and remove the protective
liners, then remove the other
piece of liner carefully.
Insert Sensor
3. Place the Sensor
Place the sensor horizontally
on your abdomen, and press
the applicator firmly against
your skin
Insert Sensor
Insert Sensor
4. Unlock the Applicator
Hold the applicator steady and
slide the safety lock button
from “locked” to “unlocked”
Insert Sensor
5. Press the Top Button
• Press the insertion button on top of the applicator.
• You could hear a clear snap when it is triggered.
• Then remove the disposable applicator from the insertion
direction
Insert Sensor
6. Press the Adhesive Tape
Press the sensor and rub
around the adhesive tape, to
make sure it is firmly
attached to your skin
Insert Sensor
7. Attach the Transmitter
• Clean the bottom of the transmitter with an alcohol wipe and wait until it dries
completely
• Check the pointy side and 2 slots side
• Put the pointy side into sensor base. Then press down one slot into the sensor
base until your hear a clear click sound, then press the other slot until you hear a
click sound
Applicator Transmitter Sensor Releaser
Remove Sensor
Remove Sensor
Remove Sensor
1. Remove Sensor & Transmitter
Remove sensor and transmitter
together off your skin.
Gently lift the edge of the adhe-
sive tape from your skin, and
remove the sensor from on side
to the other
2. Remove Transmitter
Take a releaser and pin it into
the sensor as shown above
Then pull it out to remove the
transmitter from sensor.
Important Information before using the product
Please review product instructions carefully before using the product.
The instruction have important information, including indications,
contradictions and warnings.
To get instruction, go to https://infinovo.com/en/Downloads or
contact your local distributor.
3. Clean & Discard
1
2
3
Clean your transmitter with an
alcohol wipe, then put it back to
pakage if not using, or attach it to
a new senor to start a new session
Put the releaser back to its pakage
Please refer to local regulation
policy, safely discard the sensor
Ver. 02
IFU-P3-001
www.infinovo.com/en/
Llins Service & Consulting GmbH
Obere Seegasse 34/2, 69124
Heidelberg, Germany
TEL: 0049 175 4870 819
Infinovo Medical Co., Ltd.
3rd Floor, 6th Building, No.888 Zhujiang Road,
Rudong, 226400, Jiangsu, China
To download instruction
infinovo.com
Transmitter is reusable.
Please keep it carefully.
