infobit iMeeting ShareBox User manual
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction............................................................................................................................. 1
2. Features ................................................................................................................................... 1
3. Package Contents ................................................................................................................. 2
4. Specifications ......................................................................................................................... 3
5. Operation Controls and Functions ...................................................................................... 5
5.1 Transmitter Panel .................................................................................................................... 5
5.2 Receiver Panel........................................................................................................................ 8
6. Installation Instructions........................................................................................................ 10
6.1 Installation Environment...................................................................................................... 10
6.2 Installation Steps................................................................................................................... 11
7. System Connection and Application................................................................................ 12
8. Wireless Miracast Operation .............................................................................................. 14
9. Web GUI User Guide ............................................................................................................ 16
■Device Page ......................................................................................................................... 17
1/22
1. Introduction
The product is an integrated smart connection system for desktop
conference that solves the integrated operation of high-definition audio and
video transmission, switching and control in the conference room, which can
effectively improve the efficiency of conference office and reduce the
difficulty of wiring installation.
It supports 2 HDMI, 1 VGA and analog audio inputs, audio and video
signal long distance lossless transmission. Video resolution up to
4K2K@30Hz 4:4:4. The maximum transmission distance via a single
CAT6/6a/7 cable can be 100m/330ft.
The product supports cascade installation for multiple groups of desktop
plates. It adapts H.264 audio codec processing, supports conference room
cluster management. Built-in BYOD Wireless Miracast supports IOS, MacOS,
Android, Windows personal devices fast access. CEC, RS-232, IR andRelay
control are supported.
2. Features
☆ HDMI 1.4b and HDCP 1.4 compliant
☆ Support 10.2Gbps video bandwidth
☆ Support video resolution up to 4K2K@30Hz 4:4:4
☆ Audio up to 7.1 channels of High-Definition audio pass through (LPCM,
Dolby TrueHD, and DTS-HD Master Audio)
☆ The maximum transmission distance via a single CAT6/6a/7 cable can
be 100m/330ft
☆ Support 2 HDMI, 1 VGA, analog audio input, audio and video signal
long distance lossless transmission
☆ Support Network access function, USB charging function, Power supply
function (works as a power socket)
☆ Support CEC, RS-232, IR and Relay control
2/22
☆ Automatic recognition of signal input, seamless switching
☆ Support one-button freezing function for video signals
☆ Support volume adjustment function
☆ Support cascade installation for multiple groups of desktop plates.
☆ Integrated H.264 audio codec processing, support conference room
cluster management
☆ Built-in BYOD Wireless Miracast, support iOS, macOS, Android, Windows
personal devices fast access
☆ Support USB2.0 connection camera, electronic whiteboard data back to
computer
3. Package Contents
Model
Item
Qty
AC Power cord
1
IR Blaster cable
2
IR Receiver cable
1
ShareBox
Master
WiFi Antenna
4
&
3-pin Phoenix connector (male)
4
ShareBox
Rx
4-pin Phoenix connector (male)
2
8-pin Phoenix connector (male)
1
User Manual
1
ShareBox
Slave
AC Power cord
1
DVI cascade cable (3 meters)
1
3/22
4. Specifications
Technical
HDMI Compliance
HDMI 1.4b (2 groups)
HDCP Compliance
HDCP 1.4
Video Bandwidth
10.2 Gbps
HDMI Video Resolution
480P60~4K2K@30Hz 4:4:4
Analog Video Input
VGA
VGA Video Resolution
640x480@60Hz~1920x1200@60Hz
Analog Audio Input
Stereo
Color Space
RGB, YCbCr 4:4:4 / 4:2:2
Color Depth
8/10/12-bit
HDMI Audio Formats
LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby
Digital+, Dolby TrueHD, DTS-HD MasterAudio, Dolby
Atmos, DTS:X
ESD Protection
Human body model —±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
ShareBox Master
Input ports:
2×HDMI [Type A, 19-pin female] 1×VGA
[15-pin female]
1×DVI-I [24+5-pin female]
1×AUDIO [3.5mm Stereo Mini-jack]
1×USB [Type B]
2×LAN [RJ45]
Output ports:
1×DVI-I [24+5-pin female]
1×HDBaseT Out [RJ45]
1×USB [Type A]
1×LAN [RJ45]
2×RS-232 [Phoenix connector]
4×RELAY [Phoenix connector]
2×IR OUT [Phoenix connector]
4/22
ShareBox Slave
Input ports:
2×HDMI [Type A, 19-pin female]
1×VGA [15-pin female]
1×DVI-I [24+5-pin female]
1×AUDIO [3.5mm Stereo Mini-jack]
1×USB [Type B]
2×LAN [RJ45]
Output ports:
1×DVI-I [24+5-pin female]
1×USB [Type A]
1×LAN [RJ45]
ShareBox Rx
Input ports:
1×HDBaseT IN [RJ45]
1×IR IN [3.5mm Stereo Mini-jack]
2×USB [Type A]
1×LAN [RJ45]
Output ports:
1×HDMI [Type A, 19-pin female]
1×IR OUT [3.5mm Stereo Mini-jack]
1×RS-232 [Phoenix connector]
1×AUDIO OUT [Phoenix connector]
2×RELAY [Phoenix connector]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
ShareBox Master: 245x180x166mm WDH
ShareBox Slave: 245x180x166mm WDH
ShareBox Rx: 180x98x26mm WDH
Weight
ShareBox Master: 3kg
ShareBox Slave: 2.96kg
ShareBox Rx: 500g
Power Consumption
ShareBox Master: 18W (max)
ShareBox Slave: 14W (max)
ShareBox Rx: 10W (max)
Power Supply
AC100 - 240V 50/60Hz
Operating
Temperature
32 - 104°F / 0 - 40°C
Storage Temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
5/22
5. Operation Controls and Functions
5.1 Transmitter Panel
Front Panel ( Master and Slave)
No.
Name
Function Description
1
LAN 1
Ethernet interface, connect to the computer.
2
USB Type B port
Connect to the computer’s USB port.
3
USB Type A port
Connect to a USB disk or other device with USB
port; charging port for mobile terminals such as
mobile phones and tablets.
4
Volume knob
Used to adjust the video output volume. Rotate the
knob clockwise to increase the volume and rotate
the knob counterclockwise to decrease the volume.
5
HDMI 1/2
HDMI source input port, connect to DVD/Blu-ray
player, laptop or other signal source devices.
6
VGA
VGA HD analog video input port, connect to signal
source devices such as laptop or desktop with VGA
output.
7
AUDIO
Connect to audio signal source device. The audio
follows the VGA video signal.
1
2
3
4
VOL
HDMI 1
HDMI 2
14
5
VGA
6
AUDIO
7
BODY PIP
8
9
10
HDMI1 HDMI2 VGA FREEZE
11
12
13
USER2
USER1
AC 1 00-240V
AC 1 00-240V
6/22
8
BODY button
Used to switch Wireless Miracast. When the button
is pressed, the button light will be on, and the
device will switch to Wireless Miracast output.
9
PIP button
Used to switch 3 channels of signal source output
PIP mode: single-screen, dual-screen, and three-
screen displays. Press and hold the button for 5s,
OSD will display the IP address, Subnet Mask and
Gateway information.
10
USER 1/2 button
User-defined function button. User can define the
two buttons’ functions through Web setting, please
refer to “System Control Configuration” for details.
11
Power button
When the system is on standby, short press the
button to start the system. At this time, the button
light flashes red and green for a while, then turns
to green after the system is started. When the
system is working normally, long press 3 seconds
to enter standby mode.
12
HDMI 1/HDMI 2
/VGA button
Used to switch HDMI 1/HDMI 2/VGA input signal,
and the selected button will illuminate green.
13
Freeze button
Press the button to freeze the display screen, the
button will illuminate green. If the input channel
changes, the freeze function will be canceled
automatically. This function is only valid for HDMI1,
HDMI2 and VGA input signals at the desktop plate
end, but not for the cascade input DVI signals.
14
AC POWER port
100~240V AC power output port.
7/22
Rear Panel (ShareBox Master)
No.
Name
Function Description
1
RELAY port(1-4)
4 groups of Relay output, used to control screen,
light, curtain or other controlled devices.
2
RS-232-1/2
2 channels of RS-232 output, used to control
projector, TV or other controlled devices.
3
IR OUT 1/2
2 channels of IR output, used to control devices
controlled by IR, such as TV set, set-top box and
air conditioner.
4
LAN 2/3
1) Connect to Ethernet router or Switch;
2) Used for network cascade connection.
5
HDBaseT OUT
HDBaseT signal output port, connect the HDBaseT
input port of the Receiver via a CAT6 cable.
6
DVI OUT
1) Connect to display devices;
2) Used for video cascade output.
7
DVI IN
1) Connect to signal source devices;
2) Used for video cascade intput.
8
AC Power port
1) Connect to 100~240V AC power supply;
2) Used for power cascade connection.
Note: As for the detailed description of RELAY port(1-4), RS-232-1/2 and IR
OUT 1/2, please refer to the “Control Page” of Web GUI for details.
1
2
3
4
1 2 3 4
S G S G S G S G
1 2
RELAY
RS-232-1 RS-232-2 IR OUT
AC 100-240V 50/60HZ
8
HDBaseT OUT
DVI OU T
DVI IN
5
6
7
AC 100-240V 50/60HZ
8/22
Rear Panel (ShareBox Slave)
1
AC 100-240V 50/60HZ
4
DVI OUT DVI IN
2 3
AC 100-240V 50/60HZ
No.
Name
Function Description
1
LAN 2/3
1) Connect to Ethernet router or Switch;
2) Used for network cascade connection.
2
DVI OUT
1) Connect to display devices;
2) Used for video cascade output.
3
DVI IN
1) Connect to signal source devices;
2) Used for video cascade intput.
4
AC Power port
1) Connect to 100~240V AC power supply;
2) Used for power cascade connection.
5.2 Receiver Panel
1 2 3 4 5 6 7 8
OUTPUT L R
DC 24V HDBaseT IN HDMI AUDIO SERVICE WIFI
9 10 11 12 13 14
RELAY
RS-232
IR IN IROUT
USB DEVICE
STATUS
1 2
S G S G
9/22
No.
Name
Function Description
1
Power LED
Red LED will be on when the unit is powered on.
2
STATUS LED
Used to indicate the status of IR learning:
LED is flashing: IR is learning;
LED is always on: IR learning is successful;
LED is off: IR learning has failed.
For IR learning, please refer to the WEB control
interface description.
3
USB DEVICE
Used to connect USB devices such as mouse,
keyboard or USB camera.
4
LAN
Used to connect router, switch or devices that
require Ethernet functionality .
5
IR IN
IR input port for IR learning.
6
IR OUT
Used to control devices controlled by IR such as
TV set, set-top box or air conditioner.
7
RS-232
Serial port control port. Used to control projector,
TV or other controlled devices.
8
RELAY port
Relay output control port. Used to control screen,
light, curtain or other controlled devices.
9
DC 24V
DC 24V power input port.
10
HDBaseT IN
HDBaseT signal input port, connect the HDBaseT
output port of the Transceiver via a CAT6 cable.
11
HDMI OUTPUT
HDMI output port, connect to HDMI display device.
12
AUDIO OUTPUT
Analog audio output port, connect to the amplifier
via an audio cable.
13
SERVICE port
Used to upgrade the module software of Wireless
Miracast.
14
WIFI antenna
WIFI antenna for Wireless Miracast connection.
Note: As for the detailed description of IR IN, IR OUT, RS-232 and RELAY port,
please refer to the “Control Page” of Web GUI for details.
10/22
6. Installation Instructions
6.1 Installation Environment
Before installing ShareBox Master/ShareBox Slave, confirm the installation
environment in the following aspects:
1. Ensure that there is at least 200mm of space under the installation
desktop.
2. The thickness of the desktop suitable for installation is 70~110mm.
3. The desktop is suitable for opening hole. The size of the hole is 213mm
(length) x 154mm (width).
11/22
6.2 Installation Steps
Step 1: Determine the installation position, draw lines according to the
opening size, and make sure the lines are straight and correct.
Step 2: Open the hole along the pre-drawn lines. The edge of the hole must
be flat and tidy to prevent scratches to the product. The opening error should
be controlled within +/-2mm.
Step 3: Clean the desktop and surrounding environment to ensure that the
installation environment is clean and tidy.
Step 4: Take the desktop input terminal (ShareBox Master/ShareBox Slave)
out of the package and gently put it into the hole opened in advance to
ensure that the product fits the desktop tightly.
As shown in the figure below:
12/22
7. System Connection and Application
There are two connection modes according to different applications.
Mode 1: Single ShareBox Master + ShareBox Rx application for small
conference room with 2-5 people, as shown in the following figure.
PC PC BYOD
Receiver
Audio cable
Speakers
AUDIO VGA
cable cable
HDMI cable CAT5e/6A
HDMI cable
RS-232
RELAY
ShareBox
Master
Projector
Projection Screen
Please follow the steps below to complete the connection:
Step 1: Connect the signal source to the HDMI 1 and HDMI 2 ports of the
desktop plate via standard HDMI cables.
Step 2: Connect the signal source to the VGA port of the desktop plate via
a standard VGA cable; Connect the audio source to the AUDIO port via a
3.5mm jack cable.
Note: 3.5mm stereo audio and VGA are simultaneously switched and output.
Step 3: Connect the display to the DVI OUT port of the desktop plate via a
standard DVI adapter cable.
Step 4: Connect the Receiver to the HDBaseT OUT port of the desktop plate
via a CAT cable.
Step 5: Connect other control and display devices.
13/22
PC
PC
BYOD
Speakers
Receiver
Audio cable
CAT5e/6a
HDMI
cable
RS-232
RELAY
HDMI HDMI
cable cable
Mode 2: Application of ShareBox Master + multiple ShareBox Slave +
ShareBox Rx for medium conference room with 6-20 people, as shown in the
following figure.
PC PC
ShareBox
Slave
ShareBox
Master
Projector Projection Screen
For this mode, the DVI cascade connection between ShareBox Master
and ShareBox Slave are needed.
Connect the DVI IN port of ShareBox Master to the DVI OUT port of
ShareBox Slave via the DVI cable.
Then complete the other connections as the steps of Mode 1.
AUDIO
cable
VGA
cable
DVI
Cascade
HDMI cable
......
14/22
8. Wireless Miracast Operation
There are three methods for Wireless Miracast.
Method 1: Connect via WiFi
Step 1. Press the BYOD button on the front panel of the desktop plate to
switch Wireless Miracast mode.
Step 2. Connect the phone/PC to the WiFi hotspot of the display screen.
Step 3. Follow the Wireless Miracast method shown on the display screen (as
shown below).
Method 2: Connect via router
Step 1. Connect the phone/PC to the WiFi hotspot of the display screen.
Step 2. Open the browser of phone/PC, and input “192.168.49.1”.
15/22
Step 3. Click to select “System Settings”. In this interface, you can change the
SSID name (only letters and numbers are supported) and the WiFi hotspot
password (as shown below).
Step 4. Click to select “WiFi Network Settings”.
Step 5. Click “Click to scan wifi”, find the hotspot of the wireless router to be
connected, and then connect it.
Step 6. Connect the device that needs to be projected to the wireless router.
Step 7. Open the Miracast tool of phone/PC to start screen projection.
Method 3: WiDi projection method (Only for Win8/10 laptops, no need to
install any software)
Step 1. Click the notification bar in the lower right corner of the PC display,
and click the "Connect" function; or press the shortcut key "Win" + "K" to bring
up the screen interface.
Step 2. The system automatically scans the wireless display device, selects
the display device that needs to be projected, and clicks "Connect" to start
projecting.
16/22
9. Web GUI User Guide
The product can be controlled by Web GUI. The specific operation is as below:
Step 1: Connect the LAN port of the desktop plate to PC via a CAT cable.
Step 2: Long press the PIP button for 5 seconds to check the IP Address of
the current desktop plate on the top left corner of the display connected to the
DVI OUT interface.
Step 3: Change the IP Address of the connected PC to be in the same network
segment with the desktop terminal.
Step 4: Input the IP Address of the desktop plate into the browser on the PC
to enter the Web GUI login page.
1. Youcan select the Username from the drop-down list and enter the
corresponding password. The default passwords are:
Username Admin User
Password admin user
2. The product supports Chinese and English Web page control. Youcan
switch the language (Chinese or English) by the drop-down list of the
language bar.
3. After inputting the password, click the “LOGIN” button to enter the operation
pages of Web GUI.
17/22
■Device Page
Click the “Search” button, the page will display all cascaded devices. This page
does not refresh in real time. You need to click the "Search" button to update,
when there are new or deleted cascaded devices.
•The top left corner shows the IPAddress of the cascaded device.
•The model of the device is shown at the bottom (Note that the model differs
according to usersettings).
•Click the edit icon at the top right corner, the specific information of the device
will pop up; Optional settings on the page can be synchronized to the device’s
single Web page settings.
Note: During cascading, the WEB interface of the host can search for other
devices, but a single machine cannot search for other devices.
18/22
Note: The login username will be displayed at the top right corner of each
Web GUI page. Clicking the “Log out” button will exit the current login; Clicking
the “Standby” button will set the desktop terminal device to standby.
■Status Page
1. This page shows the product status of the device.
2. The product model will be updated synchronously according to the model
entered by the user.
3. The hostname corresponds to the last 5 digits of the device's MACaddress.
This manual suits for next models
3
Table of contents
Other infobit Conference System manuals
