SAFETY INSTRUCTIONS: Please read and follow all safety instructions provided in this quick start and your User’s Guide BEFORE using your new projector. Failure to comply with safety instructions may
result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions.
Safety Definitions:
•Warning: Statements identify conditions or practices that could result in permanent personal injury.
•Caution: Statements identify conditions or practices that could result in damage to your equipment.
Safety Terms:
•Warning: Don’t look directly into the lens when the projector is turned on.
•Warning: Don’t block ventilation openings.
•Warning: To replace the lamp, turn the power off and unplug the power cord. To avoid burns, wait 30 minutes before opening the lamp door. Follow all instructions provided
in the User’s Guide.
•Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety (earth) ground terminal.
•Warning: Visible laser radiation. Do not stare into beam.
•Warning: Refer all service to qualified service personnel. Servicing your own projector will void the warranty.
•Caution: Don’t set liquids on the projector. Spilled liquids may damage your projector.
•Caution: Don’t place the projector on a hot surface or in direct sunlight.
•Caution: Do not drop the projector. Transport the projector in an In Focus-approved case; see the User’s Guide for a list of cases.
•Caution: For ceiling mount installations, use the mount recommended in the User’s Guide and follow all instructions provided with it.
Safety Symbols:
Attention: For information about usage of a feature, Warning: Laser radiation. Do not stare into laser beam.
please refer to the User’s Guide.
Warning: Hot surface. Do not touch. An arrow pointing to the lamp door of the projector.
