INIM AUXREL32 User manual
DCMIINIEAUXREL32-R100-20081210 1
Installation Manual
AUXREL32
Power distribution board
Two relay board
This power distribution board provides:
• 3 pairs of terminals protected by resettable fuses (GND/AUX1 – GND/AUX2 –
GND/AUX3), each able to provide 12V@1A
• 2 relays SPDT (single pole dual terminals), each with voltage-free contact identi-
fied by terminals C1-NO1-NC1 and C2-NO2-NC2.
The AUXREL32 board can be used with SmartLiving 1050L and 10100L control panels
(see the installation and programming manuals provided with the control panels), but it
can be used for other specific pourposes.
The activation of each relay is signaled by the on-board LEDs (see after, [D] for relay
1 and [E] for relay 2).
Box contents
• AUXREL32 board (IN048)
• 12V power wire
• OC1/OC2 connection wire
• Plastic supports for box mounting (for installation in SmartLiving 1050L e 10100L
cases)
TECHNICAL SPECIFICATION Val.
Power supply 12 V=
MAX current 3 A
Operating temperature range -5°C / +40°C
Dimensions 42 x 78 mm
2
AUXREL32 Two relay board
Description of components
A- Terminal board
B- 12V connector
C- OC1/OC2 connector
D- Relay LED 1
E- Relay LED 2
F- 12V present LED
G- Screw location
H- OC1/OC2 connection wire
I- 12V power wire
Installation
1. Insert the cable [H] into the connector [C].
2. Connect the two free wires of the cable [H] to the device that can activate the
relays with the use of a GND connection.
3. Connect the cable [I] to the connector [B].
4. The free connector of the cable [I] must be connected to a 12V power-supply. Be
careful with the polarity: BLACK=GND, RED=12V.
A
B
C
DE
A
F
G
G
G
HI
INIM Electronics reserves the right to change
the technical specifications of this product with-
out prior notice.
INIM Electronics s.r.l.
via Fosso Antico, Centobuchi
63033, Monteprandone, (AP) Italy
Tel. +39 0735 70 50 07
Fax + 39 0735 70 49 12
www.inim.biz [email protected]
Terminals icon/identifier description
1-2-3 C1-NO1-NC1 Voltage-free relay 1
4-5-6 C2-NO2-NC2 Voltage-free relay 2
7-9-11 AUX1-AUX2-AUX3 12V@1A screw terminals
8-10-12 Negative power terminals
(Negative or GND)
Table of contents
