Init7 MikroTik Fiber7-X User manual

Init7 (Schweiz) AG
Technoparkstrasse 5
CH-8406 Winterthur
[e-mail]
www.init7.net
[phone]
Questions?
Fibre optic cable.
Instruction
Brackets for rackmount.
Mounting kit.
MikroTik.
Power supply.
OTO socket.
Delivery summary.
Fiber7-X, Fiber7-X2
MikroTik
Instruction
MIKROTIK CCR20041G12S +2XS
https://www.init7.net/de/support/faq/

32 Instruction | Fiber7-X, Fiber7-X2 | MikroTik 08 | 2021 | Nr. 01
Installations Instruction MikroTik CCR2004-1G-12S +2XS
1Connecting the components
1. Use the provided fibre patch cable to connect the router to the OTO socket.
2. Connect the router to the power supply.
3. Connect your computer to the router using an Ethernet cable.
2Download script file
Download the following file:
https://www.init7.net/de/support/routerinfos/mikrotik-ccr2004_fiber7-x2_
multicast-2-1.auto.rsc (You will need it in step 6).
3Assigning a static IP address
Vergeben Sie Ihrem Computer eine statische IP-Adresse. Zum Beispiel
192.168.88.2 (nicht 192.168.88.1, die gehört dem Router).
Operating system: Linux
1. Open «Settings».
2. Click on «Network».
3. Select the detected interface (either PCI Ethernet or USB Ethernet).
4. Select «IPv4» and the method «Manual».
5. Address: 192.168.88.2
Netmask: 255.255.255.
Operating system: Windows
1. Click on the Windows symbol. Select «Settings»
-> «Network and Internet».
2. Click on the Ethernet network you are connected to.
3. Under «IP assignment», select «Edit».
4. Under «Edit IP settings», select «Manual».
5. IP address: 192.168.88.2
Subnet prefix length: 255.255.255.0
EN
Operating system: MacOs
1. Click on the Apple icon in the upper left corner. Click on
«System Preferences» and select «Network».
2. Select the network connection «Ethernet».
3. Select «Manually» under «Configure IPv4».
4. IP Address: 192.168.88.2
Subnet Mask: 255.255.255.0
4Connecting the router
Connect your computer to the Mgmt port of the router (RJ45 connector,
labelled «Mgmt port»). Open a web browser and enter 192.168.88.1 in the
address bar. Log in to the router and select «WebFig». (Note: No login data is
required for the initial connection.)
5Set up IPv6 (If you do not need IPv6, go to step 6.)
Select the item «Packages» in the left menu bar and click on the package ipv6.
Check the «Enabled» box and click «Enable».

54 Instruction | Fiber7-X, Fiber7-X2 | MikroTik 08 | 2021 | Nr. 01
EN
Troubleshooting: connection fails
If the connection with the router fails, you can reset the device to the
factory settings.
1. Disconnect the router from the power source.
3. Take a paper clip and press the reset button on the front. Press and
hold the reset button.
4. Reconnect the router to the power. The LED will light up and start flashing
after about 8 seconds. As soon as the LED starts flashing, release the reset
button. Now repeat step 2 (assign static IP address).
6Load configuration
1. Select the item «Files» in the left menu bar and click on «Select file».
Now select the RSC file that you downloaded in step 2.
2. Now click on «System» in the left menu bar and then on «Reset
Configuration».
3. Check the boxes as shown in the illustration and select the file downloaded
in step 2 under «Run After Reset».
4. Click on «Reset Configuration». The router will now restart. After the restart,
the default settings will be reloaded.
5. Do not forget to change the IP settings back to «automatic» (DHCP)
(remove manual IP configuration from step 3.)