8
www.inline-info.com
1. Press the power button for about 5 seconds until a second beep is heard and the
blue status LED flashes rapidly.
2. Press the power button again for about 5 seconds until a second beep is heard and
the blue status LED now flashes slowly.
3. In the APP press the „+“ sign (top right).
4. To add the appliance manually, please select „Fan“ from the „Small household ap-
pliances“ section.
5. Now select „Other methods“ in the uper right corner of the APP and then select
„AP mode“.
6. Confirm the following step.
7. Select your WLAN network and enter your WLAN password. „Confirm“ it.
8. The fan now acts as an access point and creates its own WLAN, to which you must
connect your smartphone or tablet directly.
9. So click on „Connect now“. In the next window the available WLAN network will
appear, name of the fan is e.g. „SmartLife-8DB6“, the letters and numbers will be
different.
10. Select it to establish a direct connection. You can ignore the message from your
smartphone or tablet that there is no Internet connection.
11. Now go back a few steps until the connection is displayed in the APP and the fan is
successfully integrated into the existing WLAN network.
12. The APP now connects to the device, wait until the display of your smartphone
confirms this.
13. After a successful connection the blue status LED stops blinking and now lights up.
14. You can assign your connected device directly to a room, but you can also simply
ignore it. The device then appears in the device overview under „All devices“.
Basically, settings/scenarios/automations for several families can be stored in this APP.
The administrator has authorization to create families and access all families.
