Inline SmartHome 40160 User manual

Art.-No.: 40160/B
STAND FAN
User manual

2
www.inline-info.com
VALIDITY
This user manual applies to the following
product:
40160B/40160 InLine® SmartHome Stand
Fan black resp. white
MANUFACTURER
INTOS ELECTRONIC AG
Siemensstraße 11
D-35394 Gießen
DATE
January 2020
CONTENT OF DELIVERY
1x InLine® SmartHome Stand Fan black
resp. white
1x user manual DE+EN
Please check the content of delivery for
completeness. If individual components
are missing, please contact your dealer.
GENERAL WARNINGS
• Keep the device away from children and pets.
• Do not block the fan by placing objects in the immediate vicinity of the fan during
operation.
• Do not use outdoors - for indoor use only.
• Only place the device on firm and level ground.
TECHNICAL CHARACTERISTICS
Color: black or white depending on model
Dimensions: 265x430x1320mm (WxDxH)
Weight: approx. 4,8kg
Airflow: <3.200m³/h
Power consumption: 50 watts
WiFi signal: WiFi 2.4GHz
WiFi standard: IEEE802.11b/g/n
Range: up to 45m (in visual contact)
Protocols: DHCP/IP/TCP/UDP
WiFi security: WPA/WPA2 encryption

3
[email protected]
Antenna: built-in omnidirectional antenna
Adjustable timer: 1h / 2h / 3h / 4h
LEDs: status and timer LEDs
Temperature range: 0° - 40°C
Humidity: 10%-90% non-condensing
App: Smart Life
Compatible with: Amazon Alexa, Google Home
INTENDED USE
The InLine® SmartHome fan generates a cool airflow through a fast rotating propeller.
The control is done either on the device itself or via APP, if a successful integration into the
WiFi network has taken place.
IMPROPER USE
Improper use within the meaning of foreseeable misuse applies:
• Do not disassemble the device.
• Only use the device inside, not outside.
• Do not expose the device to excessive heat.
• Do not subject the device to vibrations.
• Do not place the device within the reach of children and/or pets.
• Do not place the device at an angle.
Do not insert any objects or put your fingers through the front and/or rear grille
during operation, there is an acute risk of injury!

4
www.inline-info.com
RADIO FREQUENCY NOTES
General allocation of frequencies for use in local networks; wireless local area networks
(WLAN radio applications) based on § 55 of the German telecommunications act (Telekom-
munikationsgesetz - TKG) we herewith assign frequencies in the range 2400.0 - 2483.5
MHz for use of the general public in local networks, wireless local area networks (WLAN
radio applications). With this general allocation, we fulfil the compulsive implementation of
the decision by the European commission on harmonisation of the radio spectrum for use
by short-range devices dated 2006/11/09 (2006/771/EG), as amended by implementing
the decision of the commission dated 2011/12/08 (2011/829/EU), published in the official
journal of the European Union L 329, page 10 ff. dated 2011/12/13 in Germany. If you in-
tend to use this product outside of Germany, please read up in advance on the respective
regulations in your host country.
OPERATION OF THE INLINE® SMARTHOME FAN
PREPARATION
• Please check the contents for completeness: 1 Front protective grid, 1 Rear protective
grid, 1 Transparent propeller, 1 motor with control unit, 1 telescopic rod, 1 foot with
screw, 1 plastic union ring nut, 1 Transparent handle screw, 1 locking screw.
1. Mount the telescopic rod to the foot using the sup-
plied screw.

5
[email protected]
2. Place the drive with control unit on the telescopic
handle.
3. Fasten the drive by tightening the screw on the
back of the drive.
4. Place the rear protective grille on the drive motor and fasten the grille with the plastic union nut.

6
www.inline-info.com
5. Push the transparent propeller onto the drive axle.
Please make sure that the pin on the drive axle fits
into the recesses provided on the propeller.
6. Screw the propeller tight with the transparent
grip screw. (Note! The grip screw is screwed tight
on left turn / unscrewed on right turn).
7. Now hang the front guard to the rear guard and close the 4 metal hinges. For final safety, use the
supplied screw to screw the front protective grille to the rear protective grille.

7
[email protected]
• Place the device on a flat, stable surface.
• Insert the plug of the power cable into the socket.
• The standby LED lights up blue.
MANUAL OPERATION VIA KEYS
SPEED
• Briefly press the power button to turn on the device. A short beep acknowledges that
the device is switched-on. The fan now rotates to speed level 1, the status LED „1“
lights up blue.
• To increase the speed to level 2, press the speed button briefly, which is confirmed by
a short beep. The status LED „2“ now lights up.
• To increase the speed to level 3, briefly press the speed button again, which is confir-
med by a short beep. The status LED „3“ now lights up.
• When the speed button is pressed again, the speed decreases to level 1.
SLEEP MODE
• If you press and hold the speed button for about 3 seconds, the fan switches to sleep
mode, confirmed by a short beep and the sleep mode LED lights up. In this mode the
speed is automatically reduced by one level after 30 minutes and then remains at level
1. To deactivate the sleep mode, press the speed button again for about 3 seconds until
the beep sounds and the sleep mode LED goes out again.
TIMER FUNCTION
• To activate or change the timer function, briefly press the timer button until the desired
operating time (1 hour / 2 hours / 3 hours / 4 hours) is selected. Each time a change is
made, the beep sounds and the respective LED lights up blue.
OSCILLATION
• To switch on automatic oscillation, press the oscillation button. To switch off the oscil-
lation, press the button again. Both are also confirmed acoustically.

8
www.inline-info.com
OPERATION VIA APP
REGISTER AND LOGIN THE APP
1. Open the „Smart Life“ APP on your phone.
2. Register with your mobile phone number or email address.
3. Select the router and confirm the WiFi password if necessary.
4. This connects the APP to your network.
ADD/CONNECT DEVICE
1. Insert the plug of the power cable into the socket. The blue status LED flashes ra-
pidly.
2. Press the „+“ sign (top right) in the APP.
3. Select „Automatic Scan“ above. After a few seconds „Wifi Fan“ should be found.
4. Please select to connect the device.
5. To add the appliance manually, please select „Fan“ from the „Small household ap-
pliances“ section.
Download the „Smart Life“ APP from the
Google Play store and launch the APP.
Download the „Smart Life“ APP from Apple
APP store and launch the APP.

9
[email protected]
6. Select your WLAN network and enter your WLAN password. „Confirm“ to allow the
device to connect to your network.
7. The APP now connects to the device, wait until the display of your smartphone
confirms this.

10
www.inline-info.com
8. After a successful connection the blue status LED stops blinking and now lights up.
9. You can assign your connected device directly to a room, but you can also simply
ignore it. The device then appears in the device overview under „All devices“.
During setup, the fan should be near your router to have a strong WLAN signal.
If the automatic or manual addition still does not work properly, please try the
AccessPoint mode as described below.
1. Press the power button for about 5 seconds until a second beep is heard and the
blue status LED flashes rapidly.
2. Press the power button again for about 5 seconds until a second beep is heard and
the blue status LED now flashes slowly.
3. In the APP press the „+“ sign (top right).
4. To add the appliance manually, please select „Fan“ from the „Small household ap-
pliances“ section.
5. Now select „Other methods“ in the uper right corner of the APP and then select
„AP mode“.
6. Confirm the following step.
7. Select your WLAN network and enter your WLAN password. „Confirm“ it.
8. The fan now acts as an access point and creates its own WLAN, to which you must
connect your smartphone or tablet directly.
9. So click on „Connect now“. In the next window the available WLAN will appear,
name of the fan is e.g. „SmartLife-FE5E“, the letters and numbers will be different.
10. Select it to establish a direct connection. You can ignore the message from your
smartphone or tablet that there is no Internet connection.
11. Now go back a few steps until the connection is displayed in the APP and the fan is
successfully integrated into the existing WLAN.
12. The APP now connects to the device, wait until the display of your smartphone
confirms this.

11
[email protected]
13. After a successful connection the blue status LED stops blinking and now lights up.
14. You can assign your connected device directly to a room, but you can also simply
ignore it. The device then appears in the device overview under „All devices“.
Basically, settings/scenarios/automations for several families can be stored in this APP.
The administrator has authorization to create families and access all families.
DEVICE CONFIGURATION
Select the device to be set from your connected devices by clicking on it in the list.
DEVICE DATA (PENCIL TOP RIGHT)
The following names and assignments make it easier for you to create automatisms and
scenarios.
Power symbol switches the device on or off
Level 1/2/3 changes between the three speeds
Normal/sleep here you can switch between normal operation and sleep mode
Off/on here you can switch the oscillation on and off
Timer here you can program timer scenarios individually or in combination
or set the operation with subsequent automatic switch-off 1 hour, 2
hours, 3 hours or 4 hours.
Name (of the device) Please assign a name which will appear later in the device list,
automatisms and scenarios
Location (location of the
device)
Here you can optionally assign a room name in which the device is
located

12
www.inline-info.com
TROUBLESHOOTING (FAQ)
THE DEVICE CANNOT BE SWITCHED ON
Make sure that the power is supplied
NO WIFI CONNECTION POSSIBLE
Make sure that the router and the device to be connected are turned on. Check the availa-
ble WiFi standard of the device. The InLine® Smart Home product supports WiFi 2.4GHz /
IEEE802.11b/g/n
NETWORK IS FOUND, BUT NO CONNECTION POSSIBLE
Make sure that you have entered your WiFi password correctly.
Check network This allows you to check the quality of your WiFi network
Control over a third-party
vendor
If you want to use the device via a language assistant, select it from
the suggested options to initiate the connection
Share device Here you can share your set automatisms/scenarios with other
Smart Life App users and grant them access
Create group Create a group of products of the same type that can react simulta-
neously to actions
Information of the device Information about the connection to the main server
FAQ & Feedback This stands for help, here you get first help with any problems that
may arise during setup
Check the firmware up-
grade
Click on it to search for the latest version
Remove the device Removes the device from your Smart Home WiFi network
Restore factory setting The device is set to the delivery status. All individual settings are
deleted

13
[email protected]
Make sure that the encryption method of your WiFi network is WPA2-PSK and the authenti-
cation type is AES or both are set to automatic.
Check that you have selected the correct device type from the selection list when adding
manually (for the product, please select the „Fan“ in the list under the heading „Small Hou-
sehold Appliance“).
CONTACT / CURRENT PRODUCT INFORMATION
If you have any questions about the product or if you have any problems, you can contact the
manufacturer directly via live.inline-info.com or via email at [email protected].
MAINTENANCE AND CLEANING
We recommend cleaning the InLine® SmartHome fan with a clamp cloth:
1. Switch off the device and pull out the mains plug.
2. Wipe the fan clean and then dry again.
DISPOSAL
Electrical and electronic equipment and batteries must not be disposed of with household
waste. The consumer is obliged by law to return electrical and electronic equipment and bat-
teries at the end of their service life to the designated public collection points or to the point
of sale. Dispose of the packaging material sorted by type.

DISCLAIMER
1. EDITION ENGLISH 02/2020
Documentation © 2020 INTOS ELECTRONIC AG
All rights reserved. No part of this manual may be reproduced in any form or duplicated
or processed using electronic, mechanical or chemical processes without the publisher´s
written consent. It is possible that this manual may still contain typographical defects or
printing errors. However, the information in this manual is reviewed regularly and correc-
tions will be made in the next edition. We accept no liability for technical or typographical
errors and their consequences. All trademarks and industrial property rights are acknow-
ledged. Changes in the sense of technical progress can be made without prior notice.
Our products, including packaging, are not toys; they may contain small parts and sharp
objects. Keep away from children, please.
INTOS ELECTRONIC AG • Siemensstrasse 11 • D-35394 Giessen • www.inline-info.com
ANY QUESTIONS?
TAKE ADVANTAGE OF OUR LIVE SUPPORT!
Get your purchase advice, support
for all technical and installation is-
sues directly from the manufacturer.
Monday through Friday from 9 to 17
o‘clock.
MO. - FR.: 9AM TO 5PM