Innomed Medical Cardio-Aid 360-B User manual

Manual
Defibrillation with Paddles
•Switch on the device
•
•
•
•
•
•
•
Connect paddle connector at the front
of the defibrillator
Select Manual Mode
Check that there is no sync mode at the
top of the screen
Select energy level with the +/- buttons
on the Sternum paddle
Use gel on the paddles, place the
paddles on the patient and hold them
stable
Press charge button on Apex paddle
and wait until the charging is
completed. Do not move or remove
the paddles
Push the two Shock buttons on both
paddles simultaneously
Asynchronous Manual
Cardioversion with Paddles
•Switch on the device
•
•
•
•
•
•
•
•
•
•
•
•
Connect paddle connector at the front of
the defibrillator
Select Manual Mode
Check the expiry date of the ECG
electrodes and attach them to the patient
Connect ECG cable at the front of the
defibrillator and connect the lead wires to
the ECG electrodes
Push Sync On soft button
Check that sync mode is displayed at the
top of the screen
Set up Latched or Non-Latched mode with
the Menu buttons in the Sync Menu
Select the appropriate ECG lead with good
quality signal. Observe the 'S' sync
markers on the screen above the ECG
curve
Select energy level with the +/- buttons on
the Sternum paddle
Use gel on the paddles, place the paddles
on the patient and hold them stable
Press charge button on Apex paddle and
wait until the charging is completed. Do
not move or remove the paddles!
Push and hold down the two Shock buttons
on both paddles simultaneously, until the
shock is delivered. Do not move or
remove the paddles, nor release Shock
buttons until the shock is delivered!
Synchronized
Cardio-Aid 360-B QUICK GUIDE™
1
3469
2
10
8
57
Sternum Sternum
ApexApex
Using with electrodesPaddle
6
11
Innomed Medical Inc.
Szabó J. u. 12, H-1146
Budapest, Hungary
R-6789-1/A
0120
11
3
4
5
6
7
11
3
9
4
10
11
5
6
7

Manual
Defibrillation with Patches
•Switch on the device
Connect Patch cable at the front of the
defibrillator
Select Manual Mode
Check the expiry date at the patch,
open patch packet, check the patches
and attach them to the patient's chest
Connect the patch connector to the
patch cable. The blue and white parts
must be matched
Check that there is no sync mode at the
top of the screen
Select energy level with the Energy +/-
soft buttons at the front panel of the
device
Press Action button at the front panel of
the device and wait until the charging is
completed
Push Action button at the front panel to
deliver the shock to the patient
•
•
•
•
•
•
•
•
Asynchronous Manual Cardioversion
with Patches
•Switch on the device
Connect Patch cable at the front of the
defibrillator
Select Manual Mode
Check the expiry date of the ECG
electrodes and attach them to the patient
Connect ECG cable at the front of the
defibrillator and connect the lead wires to
the ECG electrodes
Check the expiry date at the patch, open
patch packet, check the patches and
attach them to the patient's chest
Connect the patch connector to the patch
cable
Push Sync On soft button
Check that sync mode is displayed at the
top of the screen
Set up Latched or Non-Latched mode with
the Menu buttons in the Sync Menu
Select the appropriate ECG lead with good
quality signal. Observe the 'S' sync
markers on the screen above the ECG
curve
Select energy level with the Energy +/- soft
buttons at the front panel of the device
PressAction button at the front panel of the
device and wait until the charging is
completed
Push and hold down Action button at the
front panel, until the shock is delivered. Do
not release Shock buttons until the shock is
delivered!
•
•
•
•
•
•
•
•
•
•
•
•
•
Synchronized
Using with electrodesPatch
Cardio-Aid 360-B QUICK GUIDE™
This Quick Guide for Cardio-Aid 360-B defibrillator is a concise description of main operations.
Please read the complete manual of Cardio-Aid 360-B defibrillator regarding detailed instructions
for use, indications, contraindications, warnings and precautions.
11
11
2
2
3
3
4
4
5
56
6
7
7
7
11
2
3
8
8
4
9
9
5
1010
1010
11
11
6
7
7