InnoPet Mamut User manual

Mamut Stroller Ocean Black
Model#:
IPS-038/OB
• This product is for pet only.
• Never allow your stroller to be used as other purpose.
• The maximum user weight of this stroller is 50kg (110 lbs).
WARNING
Important: Read carefully and keep for future reference.
Proper care foryour new stroller
• Clean Fabric with mild household soap and warm water.
• Clean Stroller frame with mild household soap and warm water.
• If wheel squeaks or rotates with difficulty, apply light oil.
(e.g.WD-40, 3-in-1, or sewing machine oil).
• Regularly check stroller for loose or missing parts.
Imported By:
InnoPet v.o.f.
Adress: Einsteinweg 53-55, IJsselstein, The Netherlands
Zipp: 3404 LJ
E-mail: [email protected]

Rear Wheel x2Rear wheel axle x1Frame x1 Front Wheel x2
1. Put the stroller frame upside down, insert the rear wheel axle into the rear wheel
housing to make sure it is in place(Fig A)
2. Open storage latch, refer to Fig B
3. Lift handle of stroller up, untill heard “Click”, refer to Fig C & D.
CHECK that the stroller is completely latched open every time you open the stroller
and before continuing with the rest of the assembly steps.
4. Keep to pull Rear Wheel Quick release button then attach rear wheel onto the axle.
Repeat for another side. refer to E & F. Pull wheel to CHECK and ensure that it is
secure.
5. Slide each Front wheels to stroller as Fig G, CHECK that wheel is securely
attached by pulling on wheel assembly.
6. Using Brake，refer to Fig H.；
7. When there are steps or the road is uneven, you can use the step pedal
to facilitate the implementation，refer to Fig I.
1. Unzip the pet compartment and Remove items complete from Rear Pocket,
refer to Fig J.
2. Push 2nd lock and push down the Release Lock on the handle, refer to Fig K.
Push backward and allow the stroller to fold in half.
3. Lock storage latch on the side of the frame.
BA
E F
G
C
D
Storage latch
Storage
latch
Click
Click
Click
Joint
H
J
L
K
I
Brake Panel
Step Panel
Release Lock
2nd Lock
Assembly & Use Instruction
Parts list
To Fold The Stroller
1. Unlatch storage latch as Fig. L.
2. Lift up on the handle and pull stroller open
to upright position. CHECK and ensure that Joints
are secure.
To Open The Stroller