Inovance MD500 Series User manual

User Guide
MD500 Series AC Drive
(500‒630 kW)
MD500 Series AC Drive User Guide (500‒630 kW)
Copyright Shenzhen Inovance Technology Co., Ltd.
Shenzhen Inovance Technology Co., Ltd.
Add.: Building E, Hongwei Industry Park, Liuxian Road, Baocheng No. 70 Zone, Bao’an District, Shenzhen
Tel: [phone]
Fax: [phone]
Service Hotline: [phone]
http: //www.inovance.com
Suzhou Inovance Technology Co., Ltd.
Add.: No. 16 Youxiang Road, Yuexi Town, Wuzhong District, Suzhou 215104, P.R. China
Tel: [phone]
Fax: [phone]
Service Hotline: [phone]
http: //www.inovance.com
A00
Data code 19010970
User Guide

Preface
- 1 -
Preface
Thank you for purchasing the MD500 Series AC Drive developed by Inovance.
As a general-purpose and high-performance current vector AC drive, it is mainly used
for controlling and adjusting the speed and torque of three-phase AC asynchronous
motors. Using high-performance vector control technology, the MD500 series AC
drive features high torque output at a low speed, excellent dynamic characteristics,
and superior overload capability. It provides user-programmable features and
commissioning software monitoring, and communication bus functions and supports
multiple encoder types, delivering rich and powerful combined functions and stable
performance. It can be used to drive automatic manufacturing equipment in the 󶍾elds
of heating, ceramic, chemical, natural gas, fan, and water pump.
This user guide mainly introduces the 500 kW to 630 kW models in the MD500 series
(hereinafter referred to as T13 models.)
Figure A Standard cabinet Figure B With auxiliary distribution cabinet

Preface
- 2 -
■First use
Read this user guide carefully if you use the product for the 󶍾rst time. For any doubt on
its function or performance, contact our technicians for help.
■Standards compliance
The following table lists the certi󶍾cates and standards that the product may comply
with. For details about the acquired certi󶍾cates, see the certi󶍾cation marks on the
product nameplate.
Name Directive Name Standard
CE certi󶍾cation
EMC Directive 2014/30/EU EN 61800-3
LVD Directive 2014/35/EU EN 61800-5-1
RoHS Directive 2011/65/EU EN 50581
TUV certi󶍾cation - EN 61800-5-1
■Acquisition
This user guide is shipped with the product. For any additional order, contact your sales
representative.
This user guide brie󶍿y introduces product information, installation and wiring,
troubleshooting, and routine maintenance. For more details, see 19010355 MD500
Series AC Drive Advanced User Guide.
To obtain the user guide, access Inovance's website (http://www.inovance.com), click
Download, search for the user guide by its name, and then download the PDF 󶍾le.

Revision History
- 3 -
Revision History
Date Version Revision Description
May 2019 A00 First issue.

Safety Instructions
- 4 -
Safety Instructions
Safety Precautions
1) Before installing, using, and maintaining this equipment, read the safety
information and precautions thoroughly, and comply with them during operations.
2) To ensure the safety of humans and equipment, follow the signs on the equipment
and all the safety instructions in this user guide.
3) "CAUTION", "WARNING", and "DANGER" items in the user guide do not indicate
all safety precautions that need to be followed; instead, they just supplement the
safety precautions.
4) Use this equipment according to the designated environment requirements.
Damage caused by improper usage is not covered by warranty.
5) Inovance shall take no responsibility for any personal injuries or property damage
caused by improper usage.
Safety Levels and De󶍾nitions
DANGER
indicates that failure to comply with the notice will result in severe
personal injuries or even death.
WARNING
indicates that failure to comply with the notice may result in severe
personal injuries or even death.
CAUTION
indicates that failure to comply with the notice may result in minor
personal injuries or damage to the equipment.
Safety Instructions
Unpacking
CAUTION
◆Check whether the packing is intact and whether there is damage, water seepage, damp,
and deformation.
◆Unpack the package by following the package sequence. Do not hit the package with
force.
◆Check whether there are damage, rust, or injuries on the surface of the equipment or
equipment accessories.
◆Check whether the number of packing materials is consistent with the packing list.

Safety Instructions
- 5 -
WARNING
◆Do not install the equipment if you 󶍾nd damage, rust, or indications of use on the
equipment or accessories.
◆Do not install the equipment if you 󶍾nd water seepage, component missing or damage
upon unpacking.
◆Do not install the equipment if you 󶍾nd the packing list does not conform to the
equipment you received.
Storage and Transportation
CAUTION
◆Store and transport this equipment based on the storage and transportation
requirements for humidity and temperature.
◆Avoid transporting the equipment in environments such as water splashing, rain, direct
sunlight, strong electric 󶍾eld, strong magnetic 󶍾eld, and strong vibration.
◆Avoid storing this equipment for more than three months. Long-term storage requires
stricter protection and necessary inspections.
◆Pack the equipment strictly before transportation. Use a sealed box for long-distance
transportation.
◆Never transport this equipment with other equipment or materials that may harm or
have negative impacts on this equipment.
WARNING
◆Use professional loading and unloading equipment to carry large-scale or heavy
equipment.
◆When carrying this equipment with bare hands, hold the equipment casing 󶍾rmly with
care to prevent parts falling. Failure to comply may result in personal injuries.
◆Handle the equipment with care during transportation and mind your step to prevent
personal injuries or equipment damage.
◆Never stand or stay below the equipment when the equipment is lifted by hoisting
equipment.
Installation
WARNING
◆Thoroughly read the safety instructions and user guide before installation.
◆Do not modify this equipment.
◆Do not rotate the equipment components or loosen 󶍾xed bolts (especially those marked
in red) on equipment components.
◆Do not install this equipment in places with strong electric or magnetic 󶍾elds.
◆When this equipment is installed in a cabinet or 󶍾nal equipment, protection measures
such as a 󶍾reproof enclosure, electrical enclosure, or mechanical enclosure must be
provided. The IP rating must meet IEC standards and local laws and regulations.

Safety Instructions
- 6 -
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be
performed by only professionals.
◆Installation, wiring, maintenance, inspection, or parts replacement must be performed
by only experienced personnel who have been trained with necessary electrical
information.
◆Installation personnel must be familiar with equipment installation requirements and
relevant technical materials.
◆Before installing equipment with strong electromagnetic interference, such as a
transformer, install an electromagnetic shielding device for this equipment to prevent
malfunctions.
Wiring
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be
performed by only professionals.
◆Never perform wiring at power-on. Failure to comply will result in an electric shock.
◆Before wiring, cut o󶍽 all equipment power supplies. Wait at least 15 minutes before
further operations because residual voltage exists after power-o󶍽.
◆Make sure that the equipment is well grounded. Failure to comply will result in an
electric shock.
◆During wiring, follow the proper electrostatic discharge (ESD) procedures, and wear
an antistatic wrist strap. Failure to comply will result in damage to internal equipment
circuits.
WARNING
◆Never connect the power cable to output terminals of the equipment. Failure to comply
may cause equipment damage or even a 󶍾re.
◆When connecting a drive with the motor, make sure that the phase sequences of the
drive and motor terminals are consistent to prevent reverse motor rotation.
◆Wiring cables must meet diameter and shielding requirements. The shielding layer of the
shielded cable must be reliably grounded at one end.
◆After wiring, make sure that no screws are fallen and cables are exposed in the
equipment.

Safety Instructions
- 7 -
Power-on
DANGER
◆Before power-on, make sure that the equipment is installed properly with reliable wiring
and the motor can be restarted.
◆Before power-on, make sure that the power supply meets equipment requirements to
prevent equipment damage or even a 󶍾re.
◆At power-on, unexpected operations may be triggered on the equipment. Therefore, stay
away from the equipment.
◆After power-on, do not open the cabinet door and protective cover of the equipment.
Failure to comply will result in an electric shock.
◆Do not touch any wiring terminals at power-on. Failure to comply will result in an electric
shock.
◆Do not remove any part of the equipment at power-on. Failure to comply will result in an
electric shock.
Operation
DANGER
◆Do not touch any wiring terminals during operation. Failure to comply will result in an
electric shock.
◆Do not remove any part of the equipment during operation. Failure to comply will result
in an electric shock.
◆Do not touch the equipment shell, fan, or resistor for temperature detection. Failure to
comply will result in heat injuries.
◆Signal detection must be performed by only professionals during operation. Failure to
comply will result in personal injuries or equipment damage.
WARNING
◆Prevent metal or other objects from falling into the device during operation. Failure to
comply may result in equipment damage.
◆Do not start or stop the equipment using the contactor. Failure to comply may result in
equipment damage.
Maintenance
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be
performed by only professionals.
◆Do not maintain the equipment at power-on. Failure to comply will result in an electric
shock.
◆Before maintenance, cut o󶍽 all equipment power supplies and wait at least 15 minutes.

Safety Instructions
- 8 -
WARNING
◆Perform daily and periodic inspection and maintenance for the equipment according to
maintenance requirements and keep a maintenance record.
Repair
DANGER
◆Equipment installation, wiring, maintenance, inspection, or parts replacement must be
performed by only professionals.
◆Do not repair the equipment at power-on. Failure to comply will result in an electric
shock.
◆Before inspection and repair, cut o󶍽 all equipment power supplies and wait at least 15
minutes.
WARNING
◆Require repair services according to the product warranty agreement.
◆When the equipment is faulty or damaged, require professionals to perform
troubleshooting and repair by following repair instructions and keep a repair record.
◆Replace quick-wear parts of the equipment according to the replacement guide.
◆Do not operate damaged equipment. Failure to comply may result in worse damage.
◆After the equipment is replaced, perform wiring inspection and parameter settings again.
Disposal
WARNING
◆Retire equipment by following local regulations or standards. Failure to comply may
result in property damage, personal injuries, or even death.
◆Dispose of or recycle retired equipment by following industry waste disposal standards
to avoid environmental pollution.

Safety Instructions
- 9 -
Safety Signs
■Description of safety signs in the user guide
i
Read the user guide before installation and operation.
Reliably ground the system and equipment.
Danger!
High temperature!
Prevent personal injuries caused by machines.
High voltage!
**min
Wait xx minutes before further operations.
■Description of safety signs on the equipment
For safe equipment operation and maintenance, comply with safety signs on the
equipment, and do not damage or remove the safety labels. The following table
describes the safety signs.
Safety Sign Description
◆Read the user guide before installation and operation.
Failure to comply will result in an electric shock.
◆Do not remove the cover at power-on or within 15 minutes
after power-o󶍽.
◆Before maintenance, inspection, and wiring, cut o󶍽 input
and output power, and wait at least 15 minutes until the
power indicator is o󶍽.

Contents
- 10 -
Contents
Preface ........................................................................................................................................ 1
Revision History ......................................................................................................................... 3
Safety Instructions ..................................................................................................................... 4
Safety Precautions............................................................................................................... 4
Safety Levels and De󶍾nitions ............................................................................................. 4
Safety Instructions............................................................................................................... 4
Safety Signs.......................................................................................................................... 9
1 Product Information........................................................................................................... 13
1.1 Nameplate and Product Code.................................................................................... 13
1.2 Components ................................................................................................................ 14
1.3 Technial Speci󶍾cations ............................................................................................... 15
1.4 Overall Dimensions...................................................................................................... 20
2 System Connection............................................................................................................. 22
2.1 System Composition ................................................................................................... 22
2.2 Options......................................................................................................................... 23
2.3 Selection of Fuses, C2 EMC Filters, and Input Reactors............................................ 24
2.4 Selection of External Braking Units............................................................................ 25
2.4.1 Selection of Resistance of the Braking Resistor .................................................. 25
2.4.2 Selection of Power of the Braking Resistor ......................................................... 25
2.4.3 Selection of Braking Units ................................................................................... 25
2.4.4 Installing the External Braking Unit..................................................................... 27
2.5 External Operating Panels........................................................................................... 28
2.5.1 External LED Operating Panel MD32NKE1........................................................... 28
2.5.2 External LCD Operating Panel MDKE9................................................................. 28
3 Mechanical Installation ...................................................................................................... 30
3.1 Mechanical Installation Precautions.......................................................................... 30
3.1.1 Transportation ..................................................................................................... 30
3.1.2 Mechanical Installation Checklist........................................................................ 31
3.2 Installation ................................................................................................................... 32
3.2.1 Preparations......................................................................................................... 32
3.2.2 Transporting Before Unpacking .......................................................................... 36
3.2.3 Tools Requirements............................................................................................. 36
3.2.4 Unpacking ............................................................................................................ 37

Contents
- 11 -
3.2.5 Removing the Pallet............................................................................................. 38
3.2.6 Transporting After Unpacking ............................................................................. 38
4 Electrical Installation ............................................................................................................ 40
4.1 Electrical Installation Checklist .................................................................................. 40
4.2 EMC-Compliant Cable Routing ................................................................................... 40
4.2.1 EMC Requirement Description............................................................................. 40
4.2.2 Routing Suggestions............................................................................................ 41
4.3 Standard Wiring Diagram............................................................................................ 45
4.4 Wiring of Main Circuit Terminals................................................................................. 45
4.5 Description of Control Circuit Terminals ................................................................... 48
5 Panel Operation.................................................................................................................. 51
5.1 Introduction ................................................................................................................. 51
5.2 Keys on the LED Operating Panel ............................................................................... 51
5.3 Indicators on the LED Operating Panel ...................................................................... 52
6 Basic Operations and Trial Run ........................................................................................... 53
6.1 Quick Commissioning Guide ...................................................................................... 53
6.2 Checklist Before Power-on.......................................................................................... 53
6.3 Display After Power-on................................................................................................ 54
6.4 Parameter Initialization............................................................................................... 54
6.5 Motor Control............................................................................................................... 55
6.6 Auto-tuning .................................................................................................................. 55
7 Troubleshooting and Solutions......................................................................................... 57
7.1 Faults and Diagnostics ................................................................................................ 57
7.2 Common Symptoms and Diagnostics........................................................................ 64
8 Routine Inspection and Maintenance ............................................................................... 67
8.1 Routine Inspection ...................................................................................................... 67
8.2 Periodic Inspection...................................................................................................... 68
8.3 Replacement of Wear Parts......................................................................................... 68
8.3.1 Lifetime of Wear Parts ........................................................................................... 68
8.3.2 Replacing Cooling Fans........................................................................................ 69
8.3.3 Adding and Replacing Cooling Liquid.................................................................. 72
8.3.4 Placing the Safety Pipe of the Waterproof Ba󶎁e ................................................ 74
8.3.5 Replacing the Dust Filter Foam............................................................................ 75
8.4 Storage ......................................................................................................................... 76

Contents
- 12 -
Appendix A Parameter Table .................................................................................................. 77
A.1 Standard Parameter Table.......................................................................................... 77
A.2 Monitoring Parameters ............................................................................................. 116
Appendix B Electrical Wiring in the Cabinet......................................................................... 118
Warranty Agreement.............................................................................................................. 119

1 Product Information
- 13 -
1 Product Information
1.1 Nameplate and Product Code
MODEL：MD500T500G
INPUT：3PH AC 380–480 V 838.1 A 50 Hz/60 Hz
OUTPUT：3PH AC 0–480 V 900.0 A 0–500 Hz 500 kW
S/N：XXXXXXXXXXXXXXXX
Suzhou Inovance Technology Co., Ltd.
Model
Rated input
Rated output
Serial No.
Nameplate
Certificate
Figure 1-1 Nameplate
NOTE
◆The product nameplate is attached on the inside of the front door of the
cabinet and can be seen only when the front door is opened.
MD500 T 500 G - A
Mark Product Name
MD500 AC drive series
Mark Voltage Class
T Three phase 380–480 V
Mark Power Class (kW)
500 500
... ...
630 630
Mark Cabinet Type
Null Standard cabinet
Mark Applicable Motor
G General type
AWith auxiliary
distribution cabinet
Figure 1-2 Model description
NOTE
◆Output reactors are equipped for standard cabinets and cabinet unis with
auxiliary distribution cabinets by default.
◆Options for cabinet units with auxiliary distribution cabinets are fuses, EMC
󶍾lters, and input reactors. For details about their selection, see
"2.3 Selection of
Fuses, EMC Filters, and Input Reactors"
.

1 Product Information
- 14 -
1.2 Components
MD500 T13 models include two structure types: the standard cabinet and the cabinet
unit with a distribution cabinet. The following 󶍾gures show their internal electrical
components.
Hoisting ring
Air inlet
Circuit breaker
switch knob
Door lock
Air inlet
Operating panel Main circuit breaker
Control board
U/V/W terminal
Water pump
DC reactor
AC drive
Coolant inlet
Top protective cover
Power indicator
Emergency stop
button
Top cooling fan
RS T
V WU
R/S/T terminal
Output reactor
Water cooling
system controller
Figure 1-3 Components of MD500T500G to MD500T630G (standard cabinet)
Hoisting beam
Air inlet
Circuit breaker
switch knob
Door lock
Air inlet
Operating panel
Top protective cover
Power indicator
Emergency stop
button
ST
R
VW U
Water pump
Output reactor
U/V/W terminal
AC drive
DC reactor
Top cooling fan
Coolant inlet
Main circuit breaker
Fuse
EMC filter
Control board
Input reactor
R/S/T terminal
Water cooling
system controller
Figure 1-4 Components of MD500T500G-A to MD500T630G-A
(with auxiliary distribution cabinet)

1 Product Information
- 15 -
1.3 Technial Speci󶍾cations
Table 1-1 Models and technical data
Item Speci󶍾cation
MD500T500G(-A) MD500T560G(-A) MD500T630G(-A)
Outputs
Applicable
motor
(kW) 500 560 630
(HP) 680 760 860
Rated output current(A) 900 1020 1120
Output voltage 0 to input voltage
Maximum output
frequency 500 Hz (editable through a parameter)
Carrier frequency 0.8 to 8.0 kHz (automatically adjusted according to the
load characteristics)
Overload capacity 150% for 60s with rated current
Inputs
Rated input current (A) 838.1 952.9 1043.5
Rated voltage/frequency AC: Three-phase 380 to 480 V, 50/60 Hz
Allowed voltage
󶍿uctuation -15% to 10%; actual allowed range: 323 to 528 VAC
Allowed frequency
󶍿uctuation ±5%
Power capacity (kVA) 952 1071 1244
Thermal
design
Thermal power
consumption (kW) 9.94 10.4 11.5
Air 󶍿ow (CFM) 2200 2200 2200
NOTE
◆The rated power is measured at 440 VAC input voltage.

1 Product Information
- 16 -
Table 1-2 Technical speci󶍾cations of MD500 series AC drives
Item Description
Standard
functions
Input frequency
resolution
Digital setting: 0.01 Hz
Analog setting: Maximum frequency x 0.025%
Control mode
Sensorless vector control (SVC)
Feedback vector control (FVC)
Voltage/Frequency (V/F) control
Startup torque 0.25 Hz/150% (SVC)
0 Hz/180% (FVC)
Speed range 1:200 (SVC) 1:1000 (FVC)
Speed stability accuracy ±0.5% (SVC) ±0.02% (FVC)
Torque control accuracy ±3% (FVC); ±5% for 5 Hz above (SVC)
Torque boost Automatic boost; Customized boost 0.1 % to 30.0 %
V/F curve
Straight-line V/F curve
Multi-point V/F curve
Complete V/F separation
Half V/F separation
Ramp mode
Straight-line ramp
S-curve ramp
Four separate acceleration/deceleration time settings
in the range of 0.0s to 6500.0s.
DC injection braking
DC injection braking frequency: 0 Hz to the maximum
frequency
DC injection braking active time: 0.0s to 36.0s.
Current level of DC injection braking: 0.0% to 100.0%.
Jog running
Frequency range of jog running: 0.00 to 50.00 Hz
Acceleration/Deceleration time of jog running:0.0s to
6500.0s
Simple PLC and multi-
speed running
The system implements up to 16 speeds by using the
simple PLC function or control terminals.
Built-in PID The system implements the proportional–integral–
derivative (PID) function in the closed-loop control.
Automatic voltage
regulation (AVR)
The system maintains a constant output voltage
automatically when the grid voltage changes through
the permissible range.
Overvoltage and
overcurrent stall control
The system limits the output current and voltage
automatically during operation to prevent frequent or
excessive trips.
Overcurrent fast
prevention The function helps to avoid frequent overcurrent faults.
Torque limit and control
The system limits the torque automatically to prevent
frequent overcurrent tripping during operation.
Torque control is applied in vector control.

1 Product Information
- 17 -
Item Description
Individualized
functions
Power dip ride-through
The load feedback energy compensates for any voltage
reduction, allowing the AC drive to continue to operate
for a short time during power dips.
Overcurrent fast
prevention The function helps to avoid frequent overcurrent faults.
Virtual I/O Five groups of virtual digital inputs/outputs (DI/DO)
support simple logic control.
Timing control Time range: 0.0 to 6500.0 minutes
Dual-motor switchover The AC drive can control up to two motors using two
groups of motor parameters.
Multiple 󶍾eld buses The AC drive supports 󶍾ve 󶍾eld buses: Modbus,
PROFIBUS-DP, CANlink, CANopen, and PROFINET.
Motor overheat
protection
The optional input/output (I/O) extension card allows
AI3 to receive a signal from the motor temperature
sensor input (PT100, PT1000) to implement motor
overheat protection.
Multiple encoder types
The AC drive supports a range of di󶍽erent encoder
types, including the di󶍽erential encoder, open-collector
encoder, UVW encoder, and resolver.
User programmable
function
The optional programming card supports secondary
development in a programming environment
compatible with the Inovance programmable logic
controller (PLC).
Advanced commissioning
software
Software in the AC drive allows users to con󶍾gure
some operating parameters, and provides a virtual
oscilloscope display that shows system status.

1 Product Information
- 18 -
Item Description
Running
Running command
Allows di󶍽erent methods of switching between running
commands: Operating panel; terminal I/O control; and
serial communication
Main frequency reference
setting channel
Supports up to 10 frequency reference setting channels
and allows di󶍽erent methods of switching between
frequency reference setting channels:
◆Digital setting
◆Analog voltage reference
◆Analog current reference
◆Pulse reference
◆Communication reference
Auxiliary frequency
reference setting channel
Supports up to 10 auxiliary frequency sources, and
allows 󶍾ne tuning of the auxiliary frequency and main
& auxiliary calculation.
Input terminals
Standard:
◆Five digital input (DI) terminals, one of which
supports up to 100 kHz high-speed pulse inputs
◆Two analog input (AI) terminals, one of which
supports only 0 to 10 V input, and the other
supports 0 to 10 V and 0 to 20 mA current input
Expanded capacity:
◆Five digital input (DI) terminals
◆One AI terminal that supports –10 to +10 V voltage
input and PT100/PT1000 motor temperature sensor
inputs
Output terminals
Standard:
◆Single high-speed pulse output terminal (open-
collector) for a square-wave signal output in the
frequency range of 0 to 100 kHz
◆Single relay output terminal
◆Single analog output (AO) terminal that supports
either a current output in the range 0 to 20 mA or a
voltage output in the range 0 to 10 V
Expanded capacity:
◆Single digital output (DO) terminal
◆Single relay output terminal
◆Single analog output (AO) terminal that supports
either a current output in the range 0 to 20 mA or a
voltage output in the range 0 to 10 V
Display
and operating
panel
LED display Shows parameters.
LCD display It is optional and shows parameters in Chinese or
English.
Parameter copy The LCD operating panel can be used to copy
parameters quickly.
Key locking and function
selection
Keys on the control panel can be locked partially or
electronically to prevent accidental operation.

1 Product Information
- 19 -
Item Description
Protections
Phase loss protection Input phase loss protection
Output phase loss protection
Instantaneous
overcurrent protection
The AC drive stops when 250% of the rated output
current is exceeded.
Overvoltage protection The AC drive stops when the DC voltage of the main
circuit is above 820 V.
Undervoltage protection The AC drive stops when the DC voltage of the main
circuit is below 350 V.
Overheat protection Protection is triggered when the inverter bridge gets
overheated.
Overload protection The AC drive stops after running at 150% of rated
current for 60 seconds.
Overcurrent protection The AC drive stops when 2.5 times of rated current of
the AC drive is exceeded.
Braking protection Braking unit overload protection
Braking resistor short-circuit protection
Short-circuit protection Output phase-to-phase short-circuit protection
Output phase-to-ground short-circuit protection
Environment
Installation location
Install the AC drive where it is indoors and protected
from direct sunlight, dust, corrosive or combustible
gases, oil smoke, vapor, ingress from water or any other
liquid, and salt.
Altitude
Below 1000 m
If the altitude exceeds 1000 m, de-rating by 1% for per
100 m increase
Maximum altitude: 3000 m
Ambient temperature:
-10°C to +40°C
If the ambient temperature exceeds 40°C, de-rating by
1.5% per 1°C increase
Maximum temperature: 50°C
Humidity Less than 95% RH non-condensing
Vibration Less than 5.9 m/s² (0.6 g)
Storage temperature -20°C to +60°C