Insignia NS-M35FMT User manual

SETTING UP YOUR TRANSMITTER
1Plug the car adapter into your vehicle’s cigarette lighter
receptacle. Your transmitter turns on.
2Connect the 3.5 mm audio plug to your audio device’s
AUX jack.
TUNING YOUR TRANSMITTER
You can tune your transmitter manually, automatically, or
with saved presets.
PACKAGE CONTENTS
• FM transmitter
• Quick Setup Guide
FEATURES
• 3.5 mm audio cable
• Auto scan quickly nds unused stations
• Buttons easily control your transmitter
Quick Setup Guide INS-M35FMT / NS-M35FMT2-C
3.5 mm Universal FM Transmitter
Before using your new product, please read these instructions to prevent any damage.
Manually tuning your transmitter
1Tune your vehicle’s radio to a weak or unused FM
frequency. You should hear static.
2Press and hold M, then press -or +to tune your
transmitter to the same frequency as your radio.
The frequency is shown on the screen.
Automatically tuning your transmitter
1Press and hold 1. Your transmitter automatically selects a
weak or unused frequency.
2Tune your radio to the same frequency as your transmitter.
Using memory presets
• Press the button (1, 2, or 3) that you saved a radio
frequency to. See“SAVING MEMORY PRESETS”for more
information.
3.5 mm audio
plug
Screen Car adapter
Frequency
tuner
Memory presets
Manual frequency mode
Adjust frequency/
Auto scan mode
1 2 3
- + M

SAVING MEMORY PRESETS
1Press and hold M to enter manual tuning mode.
2Press -or +to tune the transmitter to the frequency that you
want to save.
3While still in tuning mode, press and hold a button (1, 2, or 3)
to save the frequency to the corresponding number. Once
the frequency is saved, the screen will ash the corresponding
number once and return to display the frequency.
USING YOUR TRANSMITTER
• Play music on your audio device and adjust your radio’s
volume.
Note: Make sure that your audio device’s volume is set at a minimum
of 50%.
TROUBLESHOOTING
Audio has static
• Make sure that your radio is tuned to an FM radio frequency.
• Make sure that your radio and transmitter are tuned to the
same frequency.
• Try using a dierent FM radio frequency.
No or low audio
• Make sure that the cables are correctly and securely
connected to your vehicle’s cigarette lighter receptacle and
audio device.
• Make sure that your radio and transmitter are tuned to the
same frequency.
• Turn up the volume of your audio device or radio.
• Try using a dierent FM radio frequency. V3 ENGLISH 15-0721
SPECIFICATIONS
LEGAL NOTICES
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
Caution: Changes or modications not expressly approved by the part
responsible for compliance could void the user's authority to operate the
equipment.
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry
Canada limites établies pour un environnement non contrôlé.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
Frequency range
Cable length
88.1 - 107.9 MHz (U.S.)
39.37" (1 m)