Intelligent Home 7Avro610C User manual

AVRO Video Door System
2-wire Series
-1-
www.intelligenthomeonline.com
Installation and User Manual

1.Monitor Parts and Functions
2.Monitor Mounting
1
145~160 cm
SW+,SW-: External Call button
connection port
Ring,GND: External Ringer
connection port
NC: Not in use
L1,L2: Bus line terminal
DIP switches
DIP 1~DIP5: User Code setting
DIP 6: fi nnnOOO teS .gnittes enil fo dnE
the monitor is at the end of line or if
connected with DBC4
Monitor Terminals
LCD Screen
Microphone
Talk/Mon Button
Menu Button
Up Button
Close Button
Return Button
Down Button
Mute Button/Indicator
Unlock Button
Connection Port
Mounting Hook
1 2
SW+SW-
••••
RINGGNDNC
3
ON
L2L1
DIP
4 5 6
1 2
SW+SW-RI
••••••••
NG GNDNC
3
ON
L2L1
DIP
4 5 6
1 2
SW+SW-RINGGNDNC
3
ON
L2L1
DIP
4 5 6

4. Basic Operation
1. When door station is rung, the monitor comes
On with video
2. To start conversation, touch nnnoooMMM///kkklllaaaTTT
nottub nnnoooMMM///kkklllaaaTTT hcuot ,noitasrevnoc dne oT .3
tuhs lliw rotinoM .nottub eeesssooolllCCC hcuot ro niaga
down automatically after 40 seconds
4. During talking , touch Unlock Button to release the first lock
5. When the monitor is in standby, touch Talk/Mon Button or select Monitor
By Select button on main menu, press Menu Button to confirm, and then it will
enter the select a camera page, then you can use / Button to select the camera you
want noitcnu fgggnnniiirrroootttiiinnnoooMMM lllaaauuunnnaaaMMM rof
2
1. Use the screws to fix mounting bracket on the wall
2. Hang the Monitor on the mounting bracket firmly
00:23
DS-1
3. Main Menu
Press Menu / Close button, in
standby, the main menu page will be
shown as follows:

3
2. Inner Call : Use ‘Inner Call’ to ring to all monitors in the system. When one
of them answered your call, all other monitors will stop ringing. Conversation
will be established only between two monitors
3. Call Guard unit: Used to call the concierge in Apartment systems
5. Intercom Between Monitors Function
When the monitor is in standby, touch Menu Button to enter main menu page. Use
/ Button to move up/ down to select Intercom Call icon, touch
Menu Button
to enter the select intercom page with available Intercom options
Use / button to select
Intercom Call, then
press
Menu button to
confirm
Use / Button to selete
Namelist Call ,then
press Menu button to
confirm
Use / Button to selete
the user you want, then
press Menu button to call
Calling in progress
Namelist Call
Select Intercom
Inner Call
Call Guard Unit
[01]
Namelist Call
[03]
[04]
[02]
[01]
••••••••••••••••••••••••••••••••••••••••••••
1. Namelist Call : use ‘Intercom by ‘Name List’ to call to a specific
monitor in the system. Name list of monitors have to be created after
installation is complete and user codes of monitors are known. ‘00’ or
‘01’- are the user codes (addresses) of the monitors
Monitor By Select
Main Menu
Divert Call
Don’t Disturb
Intercom Call

7. Call Divert Function
4

1. Divert, If No Answer: If monitor is not answeredwithing 30s, call will be diverted
to the number programmed. All other monitors will stop ringing after the diversion.
Talking time is limited to 90 seconds
2. Divert, Simutaneously: call will be deliveredimmediately. All other monitors
and telephone handsets of your home telephone system will ring. All monitors will
come On with video from door station. Call can be answered from any monitor or
home telephone handset
Setup Tel Numbers: here you can type in your divert numbers. Note: when diverting
to a mobile phone it is better to disable Voicemail because system can’t leave a
voicemail and it won’t call again
Monitor By Select
Main Menu
Divert Call
Don’t Disturb
Intercom Call
No Divert
Call Divert Options
Simultaneously
Setup Tel Numbers.
If No Answer
Use / button to selete Divert
Call item, then press Menu
button to confirm.
Use / Button to selete the item
you want, then press Menu button
to confirm.
Forwarding a call from the Door Station to a mobile phone Function only
available for Apartment system with IPG Interface installed
6.Do not Disturb Function
Do Not Disturb function will set the monitor to not react to door station calls. There
are a few duration options to choose from
Monitor By Select
Main Menu
Divert Call
Don’t Disturb
Intercom Call
Normal
No Disturb
8 H
Always
1 H
Use / button to sele Don't
Disturb, then 
Menu button to confirm
Use / Button to selethen
Menu button to
confirm

8.Download 2Easy APP
1. Scan and download 2Easy APP, or search “2Easy” in A pple store for iPhone, Google
Play for Android
2. Permit “2Easy” with internet access and camera . Find in monitor“Divert”-> "SIP
Info". S can QR code from the monitor through the App and “Save”
IOS Android
No Divert
Divert Options
Sip Info
Divert
Sip InfoSip Info
pSi Info
iS p InfoiS p Infop
Sip Info Here you can
wwweeeiiivvv eeehhhttt pppiiiSSS nnnoooiiitttaaammmrrrooofffnnniii dddnnnaaa ttteeeggg RRRQQQ eeedddoooccc . Touch
Menu
button to change password

eeelllbbbaaasssiiiDDD ”””666VVVPPPIII“““ iii nnn PPPPPPAAAyyysssaaaEEE222
Most of internet provide
rs does no t support IPV6 feature, please manually disable it
with follow
ing steps:
Press here
to disable

After scanning QR code check on status bar, or press “Registered”to register manually,
until 2Easy APP display
In 2Easy APP, press on “Monitor” and wait for a few second (Due to 2-Wire
communication willtake around 12 second to get the video), blue screen is normally due to
the monitor is verifying the password anda monitor code
Surveillance of door station via 2Easy APP

8
1.Turn On : Select to switch light On manually. The light will be turned
off automatically
2.Turn On 5 min: Select to set duration of light for 5 minutes. . The light will switch
Off automatically after 5 minutes
3.Turn Off: Select to switch Off light manually
1.Ring Tune : Select to set Ringtone for Door Station, Intercom and Bell
Button (if connected) to distinguish different calling sources
2.Ring Volume : Select to set the volume of monitor ring
3.Monitor Time : Select to set manually monitoring time
4.Language Select : Select to set the operating language
9. Operating Security Light
10. Setup Instructions
Light
Main Menu
Restore
About
Setup
Light
Main Menu
Restore
About
Setup
Turn On
Light Option
Turn Off
Turn On 5min.
Ring Tune
User Setup
Monitor Time
Language Select
Ring Volume
Use / button to selete Light
item, then press Menu button
to confirm
Use / button to select Setup
then touch Menu to confirm
Use / Button to selete the item
you want, then press Menu button
to confirm
Use / Button to select, then
touch Menu to confirm
This function will be activated only when actual security light connected with an
additional RLC Light/LockControl Interface
Here you can set Ringtone, Ring Volume, Monitoring Time and Language

9
Light
Main Menu
Restore
About
Setup
Use / button to sele
About, then 
Menu button to confirm
H UnlockUse / button to increase/
decrease the value want and
press Menu button to confirm
11.Restore to a Default Settings
Here you can recover factory settings
12. Entering Installer Setup
On the Main Menu page select ‘About’
H/W : a1.1
About
Addr : 00.00
Video STD: AUTO
S/W : 00.01.00
[ 0000 ]
Installer Setup

ode 8004 is used to set the monitor as a guard monitor and 8005 is used to
cancel this function
12.1How to set the monitor as a Guard Monitor

Restore?
Press Menu button to confirm.
12.2 Restore to Default
Press
Menu Button to enter the restore page, and then press Menu Button to
confirm.
Press button to enter the restore page.
About
Addr : 00.00
Video STD: AUTO
Restore
S/W : 00.01.00
Code Setting Item Code Setting Item
2419 Project Initialize 8018-8020 Video Display Standard
2500-2549 RM Parameter Set 8401-8499 Unlock Time
8000-8003 Setting master/slave monitor 9004-9005 United Door Ring or not
8004-8005 Guard Unit Enable 9015-9016 Intercom On/Off
8006-8007 Panel on/off as slaver called 9017-9018 Doctor Function On/Off
8010-8011 Unlock Mode:Close/Open 9020-9021 Hearing Aid(T-coil) On/Off
8016-8017 Bypass Enable/Disable
12.3 S etting code s tables

10
12.2 Power Saving Mode On/Off
By default the system is set to Power Saving Mode, where only the first monitor in the
system comes On with video when door station rung. All other monitors will ring but
without video. Video will be transferred to the monitor which answers the call. To switch
the power saving mode Off, so all monitor ring with video, use Code 8006 for each
monitor


A  will ring  with video
First M  
Second  M 
12.3 Electric Lock Release Settings
Lock icon will open Lock1. If you connect 2 locks, use icon for opening
second lock independently .
Unlocking Mode. There are two unlocking Modes available
Code 8010 for Power-on-to-open lock
Code 8011 for Power-off-to-open lock
To set unlocking time, use codes 8401-8499 for 1-99 seconds
Note: Connect the lock before setting Unlocking mode and time and power
everything up. This sttings can be done on the Door Station as well and some door
stations has longer unlocking time available

12.4 Multiple Monitor System Configuration
There are two way of connecting multiple monitors:
a) Daisy Chain- each monitor connects to a next monitor
b) Star Connection- all monitors connects to a central point
Up to 16 video monitors can be connected in a House system. Up to 4 monitors in
each apartment for Apartmen systems. Each monitor in either system must be
programmed with a ‘User Code’- the address
How to program the ‘User Code’for Daisy Chain connection
All monitors must have same User Code ‘0’ and programmed as Master/Slaves.
Program first monitor as Master, all others as Slave1, Slave2, Slave3. If there are
more than 3 Slave monitors in the system, program them with different user codes
starting with code 0,1,2,3,4 and so on as for Star connection. In addition to user
code programming, last monitor in the chain have to have DIP6 set On (end of
line). Applicable Intercom function for Master/Slave programming: ‘Inner Call’-
all monitors ring at the same time. Intercom by ‘NameList’ requires different
programming, same as for Star connection
How to set Master/Slave Monitor Address
Code 8000 is used to set monitor as Master
Code 8001 is used to set monitor as Slave 1
Code 8002 is used to set monitor as Slave 3
How to Program User Codesfor Star Connection
All monitors must be connected to an additional hub- DBC4 distributor. One DBC4 can
connect up to 4 video monitors. Each monitor in the system should be assigned with
the unique ‘User Code’ according the tables on the next page and have DIP6 set On in
each monitor. Range of user codes available 00-31. In addition program all monitors
as ‘Master’. Applicable Intercom Function for such programming: ‘Intercom by Name
List’- to call to a specific monitor in the system
Allways start withuser code 00 for House system and 01 for Apartment system

12
12.5 User Codes Tables
•DIP switches 1-6 settings for up to 32 User Codes in the Tables below
•DIP 6 is determine the end of line. Must be set ON if the Monitor is at the end
of the line
ON(1)
=
OFF(0)
=
ON ON
ON 1 2 3 4 5 6
DIP state User Code DIP state User Code DIP state User Code
1 2 3 4 5 6
ON
Code=1
1 2 3 4 5 6
ON
Code=12
1 2 3 4 5 6
ON
Code=23
1 2 3 4 5 6
ON
Code=2
1 2 3 4 5 6
ON
Code=13
1 2 3 4 5 6
ON
Code=24
1 2 3 4 5 6
ON
Code=3
1 2 3 4 5 6
ON
Code=14
1 2 3 4 5 6
ON
Code=25
1 2 3 4 5 6
ON
Code=4
1 2 3 4 5 6
ON
Code=15
1 2 3 4 5 6
ON
Code=26
1 2 3 4 5 6
ON
Code=5
1 2 3 4 5 6
ON
Code=16
1 2 3 4 5 6
ON
Code=27
1 2 3 4 5 6
ON
Code=6
1 2 3 4 5 6
ON
Code=17
1 2 3 4 5 6
ON
Code=28
1 2 3 4 5 6
ON
Code=7
1 2 3 4 5 6
ON
Code=18
1 2 3 4 5 6
ON
Code=29
1 2 3 4 5 6
ON
Code=8
1 2 3 4 5 6
ON
Code=19
1 2 3 4 5 6
ON
Code=30
1 2 3 4 5 6
ON
Code=9
1 2 3 4 5 6
ON
Code=20
1 2 3 4 5 6
ON
Code=31
1 2 3 4 5 6
ON
Code=10
1 2 3 4 5 6
ON
Code=21
1 2 3 4 5 6
ON
Code=32
1 2 3 4 5 6
ON
Code=11
1 2 3 4 5 6
ON
Code=22
End of line settingswith DIP 6
DIP state Setting DIP state Setting
1 2 3 4 5 6
ON
Monitor not at
the end of the
line
1 2 3 4 5 6
ON
Monitor at
the end of
the line

Changes can be made to a Contrast, Bright ness ,
Colo r, Volume
The
Bright ness
and
Color
 image quality
setting djust the value 
The
Volume
ng tone and talking volume adjustment
13
14.Adjusting Colour, Brightness and Talk Volume
During monitoring or talking, press Menu Button, the
ADJUST MENU
will be displayed.
Use Menu Button to select the adjustment item; use / Button to decrease / increase
the value, press Return Button to  the adjust page
Bright：5
13. Basic Connection
door
station
BUS(IM) BUS(DS)
PC6
AC~
B ell Button
Switch
12
sw+sw-RINGGNDNC
3
ON
L1L2
DIP
456

15. Speci󾪢cations
●
●Power●supply●for●indoor●monitor:●● ● DC●20~28V●
●
●Power●consumption:● ●● Standby●0.17W;●Working●status●4.7W
●
●Monitor●screen:● ● 4.3●inch●digital●color●TFT
●
●Display●Resolutions:● ● 480(R,●G,●B)●x●272●pixel
●
●Video●signal:● ● 1Vp-p,●75Ω,●CCIR●standard
●
●Wiring:● ● 2●wires,●no-polarity
●
●Monitoring●time:● ● 40●seconds
●
●Talking●time:● ● 90●seconds
●
●Dimensions:● ● H137×W137×D17mm
14

WARRANTY CARD
NB Please keep this document safe, as it is proof of your Warranty
Your Video door system comes with a one year Manufacturers Warranty. When
used normally, the following services are offered:
The following actions will void the Warranty:
1. Damage to the device during installation
2. Damage to the device through misuse
3. Opening and/or disassembling the device
4. Attempting to force the device to perform functions for which it is not intended
5. Attaching the device to power supplies other than those recommended by
the manufacturer
Distributor for Warranty purposes:
Intelligent Home Online Ltd
62 Hartley Old Road
Purley
Surrey
CR8 4HJ
[phone]
www.intelligenthomeonline.com
__________________________________________________________________________________AVRO no memory version_:tcudorP
______________________________________________________________________________:rebmuNlaireS
________________________________________________________________________________________:NeciovnI
Purchase Date_________________________________________
________ ________ __
_________ _________ _
_______ _________

-18-
www.intelligenthomeonline.com
Right to interpret and copyright of this manual are preserved.
AVRO 2-wire series