Intelligent Home IH-692 Slave User manual

VIDEO DOOR PHONE SYSTEM
USER MANUAL
ENGLISH
Manual covers IH-692 Master and IH-692 Slave Monitors

Connect this unit ONLY to other compatible units. Do not connect it to any other
type of alarm or auxiliary device. Connecting anything else to this unit may
damage it or prevent it from operating properly, and will invalidate the warranty.
Do not place cables from the AC/DC adapters, camera or monitor where they
can be damaged or stepped on. Protect the cables by keeping them out of the
way of children, pets and routine household traffic. Do not place heavy objects
on power cables; do not cover them with rugs or carpet.
Unplug the AC/DC adapters from the wall outlet when the system is not in use
for a long time.
Slots or openings in the back of the monitor, are provided for ventilation and to
ensure reliable operation of the video monitor or equipment and to protect if from
overheating. These openings must not be blocked or covered. The monitor
should never be placed near or over a radiator and should not be placed in a
built-in installation or enclosure unless proper ventilation is provided.
All parts should be protected from violent vibration. Impact shocks and dropping
may damage the product and should be avoided.
Installation of doorbell camera facing into direct sunlight may affect quality of
the video.
PRECAUTIONS BEFORE INSTALLATION

1. Parts and Functions ------------------------------1
2. Mounting and Installation------------------------1
3. Standard System Wiring-------------------------2
4. Connecting Multi Monitors/Audio phone----3
5. Connecting 2 Doorbell cameras----------------4
6. Operating Instructions----------------------------5
7. Precautions-----------------------------------------11
8. Specifications--------------------------------------11

CONTENT
The model you purchased may not have all the functions
mentioned here, but the operationsare similar.

Touch Screen Operation
All the operations and settings can be done
by touching the LCD screen.
Full Screen Digital Clock
The date and time will displayed when touch
anywhere of the screen, and it will closed
automatically after 3 minutes.
Press-To-Talk Function
A special ‘listening’ mode which suppresses
external background noise..
AUTO Picture Memory(optional)
When the house owner is out, the monitor can
take pictures of visitors who called your
door/bell; you can check pictures with date and
time later on.
RLC Control Unit(not included)
To connect second electric lock or light.

Use the screws to fix the Mounting Bracket on the wall. Screws and brackets are
included with the product for this purpose.
1. Parts and Functions
2. Mounting and Installation
-1-

Terminals and descriptions:
•1R Power positive. +12V present when Outdoor Station calling or being
monitored.
•2W Power negative (GND)
•3Y Image signal (Video signal)
•4B Talk and control signal (Audio signal)
•POWER TERMINAL: Black wire DC negative (-)
•POWER TERMINAL: White wire DC positive (+)
It’s recommended you use shielded alarm cable 4x0.3mm2 for distances up to
30m. For distances over 30m, we suggest you add coaxial cable (RG-59) to
connect the 3Y and 2W pin in addition to the alarm cable.
Note 1: Plug the AC Adaptor in to the AC power terminal ensuring it is well seated.
Note 2: If you want to use multiple monitors: For a single Monitor system, keep the
jumper (which is already on JP-VD ). If you are setting up a multi-Monitor
system, remove all JP-VD jumpers EXCEPT the last Monitor. NB If you are
setting up monitors PARALLEL rather than chained, the ‘last’ monitor is the
one physically furthest away from the door station.
Note 3: JP-LK is used to enable the electric Lock function. Remove the jumper if you
are going to use the Monitor power to supply power to the Lock. Refer to the
Doorbell camera manual.
3. Standard System Connection
-2-

4. Connecting multiple Monitors and/or Audio Phones
-3-

5. Connecting 2 Doorbell cameras (CCTV camera)
-4-

6.1 Basic Functions
When a visitor presses the Call button on the doorbell/camera unit, the
monitor will ring and display the visitor’s image; also the IN-USE LED will
turn red.
To answer the doorbell, press the TALK/MON button (or touch ‘’icon on
the screen). You can talk with the visitor for 90 seconds before the screen
will automatically shut off. To end the conversation yourself, press
TALK/MON Button (or touch ‘’icon) again. If nobody responds to the
visitor, the monitor will turn off automatically after 30 seconds.
Press-To-Talk: The monitor has a special ‘listening’ mode which
suppresses external background noise and makes it easier for you to hear
the person at the door. To get into this ‘listening’ state press the ‘Press
to talk’icon. To switch back to ‘normal’ mode, press ‘Auto Talk’icon.
When Monitor is in standby mode, press TALK/MON button (or touch
anywhere on the screen, then touch ‘monitor’icon) and the screen
6. Operating Instructions
-5-

will display the view from the doorbell (Outdoor Station). During monitoring
state, press TALK/MON button (or touch ‘’icon) to talk to someone
outside. Press again to exit. The monitoring state is limited to 30 seconds
and will shut off automatically.
When you wish to open the door lock, press UNLOCK button (or touch
‘unlock’icon) to release the Electric Lock.
To get the system to record pictures automatically from the doorbell
when people come to the door, press MENU, press SETUP and press
AUTO-RECORD on. It will record up to 120 pictures of people at the
door even if you are not there to answer.
Press the RECORD Button (or touch ‘’icon) to manually record the
current picture.
Touch the ‘’icon to hide the icons; to re-show the icons, touch
anywhere on the screen again.
6.2 Operation for Multiple Doorbell Cameras (if required)
- If two doorbell cameras are required, the One/Two Camera option
should be enabled. To do this, touch ‘’icon to enter SETUP. Now
press ADVANCED SET (tings) submenu. Enter the password (2008),
and change the mode to 1/2 CAMERA.
- Two doorbell cameras can be connected to the monitor directly. The
second outdoor station can be a doorbell or a CCTV camera. For the
system to function correctly, you must have at least one doorbell. If
there is only one Outdoor station to be installed, the Outdoor station
must be connected to the CAM1 Port. The second must be connected
to the CAM2 Port.
- When monitoring multiple doorbells/CCTV cameras (outdoor stations),
switch between them by pressing TALK/MON. Each time you press
TALK/MON it will take you to the next outdoor station.
Please Note: If two doorbells connected, and each doorbell is connected to an
electric lock, when you operate EITHER of the UNLOCK buttons on EITHER
monitor, it will unlock BOTH locks. If you don’t wish for this to happen, you can
purchase and install an RLC controller and operate them separately.
-6-

6.3 Intercom function (available when Multiple Monitors are
installed)
- Intercom can be initiated by either Monitor. Press the INTERCOM
button, the other Monitor will ring. Press TALK/MON button on the
other Monitor to answer.
- To end the intercom conversation, press TALK/MON. If no one
answers, it will exit automatically after 30 seconds.
- The doorbell function will always override the intercom function.
6.4 Image and Volume adjustments
- During monitoring or talking, press the MENU button (or touch the ‘’
icon), and the screen adjustment menu will be displayed.
- The ‘+’/ ‘-’icon increases or decreases current value; press the ‘’
button to switch to the next adjustment item.
- The first item is Scene mode selection: Total 4 Scene modes can be
-7-

selected in sequence: Normal, User, Soft and Bright. Whenever you
modify Brightness or Colour, Scene item will be set to User mode
automatically.
- Screen Ratio can be shifted from 16:9 to 4:3.
- The Brightness and Color item is for image quality setting. Adjust the
value to get the best image.
- The Ring Volume and Talk Volume items are for ring tone and talking
volume adjustment.
- Note that all the modifications will be done immediately after the
operation. Press the TALK/MON button (or touch the ‘’icon) to exit
settings.
6.5 Basic Setup Instructions
- Touch anywhere on the screen and the date/time page will be
displayed. The first line shows the current time, the second line shows
the current date and weekday. The date/time page will close in 3
minutes if no buttons are pressed.
- Entering the main Menu. Touch the screen again to enter the Main
Menu, press ‘’icon to enter Setup Menu.
- Going into Setup To enter setup, press the plus or minus button to
change options on the menu, and move the highlighted option to
SETUP. You will see the following:
-8-

- ‘Outdoor Tone’and ‘Intercom Tone’are for choosing the
doorbell melody and the intercom melody.
- ‘Monitor Time’: To change the amount of time the monitor will
remain active if no buttons are pressed, use the plus and minus
buttons to set between 30 seconds and 10 minutes.
- ‘Advanced Set’: To access the Advanced Settings, a password
will be required before entering. The default password is 2008.
- The One/Two Camera can be set to 2 if two outdoor stations are
to be installed.
- Unlock Time: can be adjusted according to different locks.
- DATE/TIME Set: to amend the time and date, access this option.
Use MENU button to move the cursor, and plus minus buttons to
change the date/time. Touch the ‘#’ icon (on the number key pad)
to save and exit or touch the ‘’icon to cancel.
-9-

‘Other Device Set’submenu: RLC and Remote settings.
‘Information’submenu: shows the hardware/software version and
voltage info. Press ‘Restore to Default’if you wish to restore all the
settings to factory defaults.
6.6 Image Recorder Operation (master only)
- Pictures can be recorded both manually and automatically. Image
capacity is about 128 pictures. When the memory is full, the oldest
picture will be replaced.
- Manually taking pictures: If you wish to take a picture, you can do
so by pressing MONITOR, then pressing the REC icon ‘’.
- Automatic recording: (see instructions above to enable this option)
- Viewing pictures: To view the pictures on your monitor, press the
PLAY button. The latest pictures will be shown. To move through the
pictures, press either the PLAY button (or touch the ‘play’icon).
To delete a picture, touch the ‘DELE’icon. A 'DELETE?' hint will
show on the upper right of the screen. Touch the ‘DELE’icon
again to delete the current picture. Please note that deleted pictures
cannot be restored.
-10-

1. All parts should be protected from violent vibration, forceful impacts and
being dropped onto hard surfaces.
2. Do NOT clean the Lens or Screen using your hands or a wet cloth. Do not
use organic or chemical cleaners.
3. Clean using a soft cotton cloth. If necessary, lightly dampen the cloth to
remove stubborn dirt.
4. Image distortion may occur if the video door phone is mounted too close
to a strong magnetic field - loudspeakers, industrial magnets etc.
5. Please keep the video door monitor shielded from excessive water, high
temperatures, heavy dust, and highly caustic substances in order to avoid
damage.
Indoor monitor power: DC 15~18V (supplied by Adaptor)
Door Station power: DC 10~12V (Supplied by Indoor Monitor)
Audio Phone power: DC 10~12V (Supplied by Indoor Monitor)
Power consumption: Standby 0.5W; Working status 15W (for kits)
Monitor screen: 7 Inch color TFT-LCD
Display Resolution: 1,440 (R.G.B) x 234 pixels
Video signal: 1Vp-p, 75Ω, CCIR standard
Picture Memo Capacity: 128 PCS (approx)
Wiring: 4 wire with polarity
Monitor time: 30 seconds (default)
Talking time: 90 seconds
Dimensions: 155(H)×225(W)×28(D)mm
7. Precautions
8. Specification
-11-

WARRANTY CARD
NB Please keep this document safe, as it is proof of your Warranty
Your Video door system comes with a one year Manufacturers Warranty. When
used normally, the following services are offered:
1. Replacement for malfunctioning parts in first three months
2. Repair free of charge for malfunctioning parts in first year
The following actions will void the Warranty:
1. Damage to the device during installation
2. Damage to the device through misuse
3. Opening and/or disassembling the device
4. Attempting to force the device to perform functions for which it
is not intended
5. Attaching the device to power supplies other than those
recommended by the manufacturer
Distributor for Warranty purposes:
Lale Trading Ltd
34a High Street
Hornsey
London
N8 7NX
[phone]
www.intelligenthomeonline.com
Product:______________________________________________
Purchaser Name: _______________________________________
Invoice N: _____________________________________________
Purchase Date_____________________________________________

T he design and specifications can be changed without notice to the user.
R ight to interpret and copyright of this manual are preserved.