Inter-m PB-9207A User manual

Commercial Audio - 19” Systems
MODEL NO;PB-9107A
BATTERYCHARGER
MADE IN
KORE
A
( ) ( )
S/N
BATTERYIN
PB-9207A: Battery Charger
For use with all Inter-M power amplifiers, the PB-9207 allows the use of DC batteries for systems
which require back-up in the event of mains failure. By continuous monitoring of the batteries, the
PB-9207 will automatically charge, thus keeping the batteries in good condition until needed. Status
and condition of the batteries is shown on a clear LED display on the front panel.
Features:
• 1 large LED status/display shows volts and amps
• DC input terminals (on rear)
• Mains powered
•2U high, 19” rack mounting
Specifications:
Model: PB-9207A:
Charging Current 3A
Charging Voltage 27.3v DC
Display LED, volts and amps
Protection Overcurrent and overcharge
Power Requirement 230v AC 50Hz
Dimensions 482(W) x 88(H) x 280(D)mm
Weight 6.2kg
DC Volt
POWER
ON
OFF
BAT TE RY CHA RGER
PB-9207A
DC Ampere
BATTERY IN
AC INPUT
www.inter-m.uk.com