Interface MBA-E2402 User manual
Notes to Users
The specifications of the product are under continuous improvement and while every effort is made to keep this manual
up-to-date, we reserve the right to update the contents of this user’s manual without prior notice. Therefore, you should
thoroughly read this user’s manual even if you have often purchased this product before.
Using this product requires technical knowledge of hardware and software.
Use this product only under the specified conditions such as power supply, voltage, temperature, and humidity range.
Interface Corporation’s products are not designed with components intended to ensure a level of reliability suitable for use
under conditions that might cause serious injury or death.
Please consult our Technical Support Center if you intend to use our products for special purpose, such as use for moving
vehicles, medical treatment, aerospace engineering, controlling nuclear power, submerged translators and so on. This
product is made under strict quality management, however, when using this product for the purposes that may result in any
damages, lost profits, or any other incidental or consequential damages resulting from breakdown of this product, the user
is required to take adequate and appropriate measures, such as installing safety devices to avoid possible serious accidents.
Conventions Used in This Manual
This icon denotes a warning, which advises you of precautions to take to
avoid injury, data loss, or system crash.
This icon denotes a note, caution, or warning.
Indemnification
Interface Corporation makes no warranties regarding damages resulting from installation or use of this product, whether
hardware or software, and assume that such risk reverts to the user.
Interface Corporation shall not be liable for any incidental or consequential damages, including damages or other costs
resulting from defects which might be contained in the product, product supply delay or product failure, even if advised of
the possibility thereof. Customer’s right to recover damages caused by fault or negligence on the part of Interface
Corporation shall be limited to the amount paid by the customer for that product.
This product including its software may be used only in Japan. Interface Corporation can not be responsible for the
use of this product outside Japan. Interface Corporation does not provide technical support service outside Japan.
Warranty
Interface Corporation products are warranted for a period of one year from the date of shipment, as evidenced by receipts
or other documentation. This warranty does not apply to the software products, accessories, and expendable supplies such
as batteries.
Note: You can determine the warranty period at our Web site by the serial number of your product. Those without Internet
access should contact the Sales Information Center.
During the warranty period Interface Corporation will, as a general rule, replace or recondition the defective product
without charge, in which case the user will be required to pay the shipping costs, except as set forth below.
The Warranty provided herein does not cover expendable supplies such as batteries and damages, defects, malfunctions,
or failures caused by impact during transportation while under owner’s responsibility; owner’s failure to follow the
instructions and the precautions contained in this manual; modification and/or repair of the product by other than Interface
Corporation, trouble caused by use with peripherals not specified by Interface Corporation, power failure or surges, fire,
earthquake, tidal wave and/or flood.
This warranty applies only when the product is used in Japan.
Interface Corporation warrants its repairs for six months, and will again repair the same defective part without additional
charge provide the product is economically repairable. In that case, the user should attach a copy of the most recent repair
report to the repair request form. If no repair report is attached, it will be considered as a new repair request.
Before You Export Interface Products
The foreign exchange and foreign trade law of Japan controls the export of this product, due to its possible use as a
STRATEGIC MATERIAL. Therefore, before you export this product, you must secure an export permit from the
Ministry of Economy, Trade and Industry of Japan.
MBA-E2402 Ver. 1.1 (CAB-2402)
Interface Corporation -1-
Revision History
Version Date Comments
1.0 May 2003 First release
1.1 August 2004 The user’s manual covers added.
Dimensions of the Connector
14
26 13
1
A-side B-side
Connector catalog number: 10126-6000EL (SUMITOMO 3M Limited.) or equivalent
Cover catalog number: 10326-A200-00 (SUMITOMO 3M Limited.) or equivalent
Cable: UL20276 AWG28 (7/0.127) or equivalent
2.0 (m)
13
114
26
Diameter: 7 mm (approx.)
1
2
3
4
7
8
17
A-side
Connector
Pin Number
6
5
20
24
1
2
3
4
7
8
17
6
5
20
24
B-side
Connector
Pin Number
Due to constant product improvements, the information in this user’s manual is subject to change without prior notice.
For Assistance:
Please visit our Web site (www.interface.co.jp) or send a fax (0120-621553(in Japan)) or e-mail (suppo[email protected]) to the
Technical Support Center.
We recommend you to ask questions from our Web site to shorten the answering time.
If the problem is urgent, please consult the Sales Information Center.
When you contact us, we need the information on the Technical Support Form provided with this manual plus the information listed
below so we can answer your questions as quickly as possible.
Computer Environment Computer brand and model, specific operating system,
software configuration, other interface boards installed if any.
D
De
es
sc
cr
ri
ip
pt
ti
io
on
n
o
of
f
T
Th
he
e
P
Pr
ro
ob
bl
le
em
mSituations where the product was used.
Technical support is available during business hours.
We provide a product rental service so you can evaluate our product prior to purchase.
Inquiries Refer to Phone FAX
Product Rental Service Technical Support Center 082-262-1630 (in Japan) 082-262-1552 (in Japan)
0120-447213
(in Japan)
0120-458257
(in Japan)
Distributors,
Shipping Date,
Prices, Others
Sales Information Center
Repair and Maintenance
The company will, at its option, replace its product, which the company, upon inspection, shall determine to be defective in material
and/or workmanship. If the product is obviously damaged or defective, please return it using procedures outlined below.
1. Fill out the Repair Request Form. Describe hardware configurations of the board and malfunction in detail.
2. Fax the Repair Request Form to the Technical Support Center.
3. We will send you a repair quotation by return fax.
4. Carefully repack the damaged product, enclosing the Repair Request Form, and forward it (shipping prepaid) to the repair group, at
our Oita Plant (address shown below).
When the damage or defect is not obvious, please contact the Sales Information Center or our Technical Support Center.
Be aware that depending on the extent and type of damage, the unit may not be economically repairable. If so, we will notify you
immediately.
Receiver’s Address Repair Group, Oita Plant, Interface Corporation
1428, Shimobaru, Aki-machi, Higashikunisaki-gun, Oita, 873-0231 Japan
Contact Information
Technical Support Center
Phone: 082-262-1630 (Available during business hours)
FAX: 082-262-1552
Visit our Web site (www.interface.co.jp) for:
Technical Support Frequently asked questions, related technical terminology
Product Information The latest information about our products; specifications, product selection guides, etc
Useful Information Discount information, rental information, distributors
Downloads Service Drivers, technical documents such as I/O port maps, sample programs, and user’s manual data.
The design and contents of the web site are under constant review. Therefore, there might be some changes in its design and contents.
is a trademark of Interface Corporation.
Other product and company names are trademarks, registered trademarks, or servicemarks of their respective owners.
2003, 2004 Interface Corporation
All rights reserved. No part of this publication may be reproduced or altered in any form or by any means without the written permission
of Interface Corporation.
This manual suits for next models
1
Table of contents
Other Interface PCI Card manuals
