Intermec Sabre 1400 User manual

Quick Start Guide
Sabre 1400
Hand-held Scanner

2
Introduction
Full setup
Configuración completa
Configuration complète
Vollständige Konfiguration
Configurazione completa
Configuração completa
EasySet setup software
(on the CD-ROM)
Use this Quick Start Guide to set up the Sabre 1400 for most terminal connections and
symbologies. If necessary, use the EasySet setup software for additional configuration
possibilities and terminal connections.

3
Connect scanner cable
Scanner cable depends on
your terminal
Cables and
accessories
With the Sabre 1400 :
- Do not use Sabre 1551A, B, or C cables.
- Do not use DEC VT 220 cable for Sabre 1551E (3-604037-11)
(may damage the Sabre 1400).

4
AZERTY French
QWERTY US English
QWERTZ German
QWERTZ Swiss / French
Keyboard wedge (for PC)
System power OFF
X
Din/mini-Din adaptor cable
PC wedge cable
P/N 3-604037-21
Connect cables
Y
System power ON
Z
power supply
(normally not required)
Select keyboard
[

5
QWERTY Swedish / Finnish
QWERTY Italian
QWERTY Norwegian
QWERTY Danish
QWERTY Spanish
Customize parameters (optional)
(*) = default value
Postamble = Tab
Postamble = none
Postamble = Carriage Return
Postamble = Enter (*)
\
QWERTY Portuguese

6
X
Y
Z
[
\
RS-232 C
Connect cables
Scanner power ON
Standard RS-232 C cable
P/N 3-604032-18
System power OFF
System power ON
Read this code (standard RS-232 C
PC serial port compatible)
9600 baud, 7 data bits, even parity, 2 stop bits
postamble = carriage return + line feed

7
Customize parameters (optional)
(*) = default value
]
9600 baud (*)
19200 baud
7 data bits (*)
8 data bits
No parity
Postamble = Carriage Return
Postamble = none
Even parity (*)
Odd parity
Postamble = Carriage Return + Line Feed (*)

8
Wand emulation
Wand emulation cable
P/N 3-606031-13
Connect cable
System power OFF
System power ON
X
Y
Z
Analog wand emulation - Intermec interface, white high
Digital wand emulation
Wand emulation
[

9
UPC-A, UPC-E, EAN-8, EAN-13
(UPC-A -> EAN-13)
UPC-A, UPC-E, EAN-8, EAN-13
(UPC-A -> UPC-A)
Code 128 / EAN 128
Code 39
Symbology
Disable all symbologies
X
Select symbology
Y

10
Default setup
Test symbology