Intermec Sabre 1553 Configuration guide

11553NI XLR Scanner Manual Supplement
1553 Non-Incendive (NI) Extra Long
Range (XLR) Scanner
The Model 1553NI XLR Scanner has been qualified
by Underwriters Laboratories Inc., to the requirements
of the USA and Canada for use in Class 1, Division 2,
Groups A, B, C, D, and Non-Hazardous locations
only. The 1553NI XLR Scanner has a T6 temperature
code. The use of the 1553NI XLR Scanner in poten-
tially explosive environments is restricted to the limita-
tionsdetailedinthisdocument.
Warnings and Cautions
Explosion Hazard-Substitution of
components may impair suitability for
Class I, Division 2.
Note: This unit has no operator replace-
able parts. Repair of the 1553NI XLR
Scanner must be performed by trained In-
termec service personnel.
The following additional warnings and cautions must
be observed for the safety of the operator and others in
potentially hazardous locations:
SThe 1553NI XLR Scanner must only be used when
the ambient temperature is between -20°Cand
+50°C(-4°F and +122°F).
SThe 1553NI XLR Scanner may only be used with
Intermec Model 700CNI. This connection is made
through the tethered scanner adapter (TSA), Inter-
mec Model 700CNI-TSA, p/n 225-686-007 which
in turn is used with Intermec cable 3-604032-06.
There are no other terminals currently qualified for
use with the 1553NI XLR Scanner. The connec-
tions between the 1553NI XLR Scanner, the cable,
700CNI-TSA, and Model 700CNI must be made
in areas known to be non-hazardous.

2 1553NI XLR Scanner Manual Supplement
1553NI XLR Scanner Manual Supplement May 2004
*962032009A*
P
/
N: 962032009A
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203
tel [phone]
fax [phone]
www.intermec.com
E2004 by Intermec Technologies Corporation. All rights reserved.
U.S.A.