Intermec ScanPlus 1802 User manual

Getting Started
Guide
ScanPlus 1802
Cordless System

2 3
Step 1
Step 2
Step 3
Quick setup
PC Keyboard wedge cable or USB Cable .......... 4
RS-232 C cable............................................................6
Return to the default setup.............................................. 9
Using more than one Cordless System ........................ 9
Use the EasySet software for additional setup
options..................................................................................10
Operating your Cordless System.................................11
Add more scanners to your system.............................11
Test bar codes.....................................................................16
Read the Recommendations...............................................3
Choose your connection:
Select symbologies for your scanners .............................8
If necessary . . .
The ScanPlus Cordless System consists of a base station (MicroBar 9735) and at
least one scanner (ScanPlus1802).

2 3
Step 1 Recommendations
Recommended Not recommended
0 - 15 m
(0 - 50 ft)
15 - 25 m
(50 - 80 ft)
The MicroBar 9735 must not be connected by the RJ connectors to any type of telecom-
munications circuits.

4
Step 2
PC wedge cable
P/N 3-414037-11
Keyboard wedge or USB (PC)
Connect base station
System power OFF
System power ON



Associate cordless scanner(s)

Recharge battery
"beep beep"
Only do this if you are using a Keyboard wedge or a USB cable.
USB cable
P/N 3-414038-11
port 3
Keyboard wedge cable USB cable

5
AZERTY French
QWERTZ German
QWERTY English
Select keyboard

QWERTY Italian
QWERTY Danish
QWERTZ Swiss / French
QWERTY Swedish / Finnish
QWERTY Spanish
QWERTY Portuguese
QWERTY Norwegian
Postamble = Carriage Return
Postamble = Tab
Postamble = Enter (*)
Postamble = none
Customize parameters (optional)
(*) = default value


6 7
Step 2
Read this code (standard RS-
232 C PC serial port compa-
tible)
9600 baud, 7 data bits, even parity, 2 stop bits
postamble = carriage return + line feed

Associate cordless scanner(s)
System power ON

Connect base station
Direct RS-232 cable
P/N 3-414032-10

System power OFF

Recharge battery
"beep beep"
power supply
RS-232 C
Only do this if you are using an RS-232 C cable.

6 7
Customize parameters (optional)
(*) = default value

Postamble = Carriage Return + Line Feed (*)
Postamble = none
Postamble = Carriage Return
Even parity
No parity
Odd parity
7 data bits
8 data bits
19200 baud
9600 baud

8 9
PDF417
Code 39
Code 128 / EAN 128
UPC-A, UPC-E, EAN-8, EAN-13
(UPC-A -> UPC-A)
UPC-A, UPC-E, EAN-8, EAN-13
(UPC-A -> EAN-13)
Step 3 Symbologies
Select symbology
Disable all symbologies


Set symbologies for each cordless scanner.
Use the bar codes on the back cover to test your setup


8 9
Default setup
Using more than one Cordless System
When using more than one cordless system in the same area, we strongly
recommend using dierent channels for optimal performance.
North American version 906MHz - channel 2
European version 433MHz - channel 5
channel 1 channel 2

10 11
Full setup with EasySet
Connect base station
Associate cordless scanner(s)
Start the EasySet software
Send setup bar codes to the EasySet setup sheet
Print setup sheet





Read the bar codes on the setup sheet

"beep beep"