Intermec EasyCoder 7421 User manual

P/N 066387-003
Setup Guide
EasyCoderEasyCoder
74227422
EasyCoder
™
7421 Printer

7421 Printer Setup Guide7421 Printer Setup Guide
1
Unpacking the Printer
Déballage de l’imprimante
Auspacken des Druckers
Disimballaggiodellastampante
Desembalaje de la impresora
Desembalar a impressora
7421S.001
EasyCoderEasyCoder
74227422

7421 Printer Setup Guide7421 Printer Setup Guide
2
Connecting the Printer
Connexion de l’imprimante
Anschließen des Druckers
Collegamentodellastampante
Conexión de la impresora
Conectar a impressora
7421S.002
Serial Cable
Câble série
Serieller Anschluß
Cavo seriale
Cable serial
Cabo serial
Serail Cable
Parallel Cable
Câble parallèle
Paralleler Anschluß
Cavo parallelo
Cable paralelo
Cabo paralelo
or
ou
oder
o
o
ou

7421 Printer Setup Guide7421 Printer Setup Guide
7421S.003
EasyCoderEasyCoder
74227422
3
Loading Media
Chargement du support
Laden von Medien
Caricamento dei supporti
Carga de etiquetas
Carregar mídia
1
120066102605140
120066102605140
7421S.000
7421S.037
7421S.044
22
7
6

7421 Printer Setup Guide7421 Printer Setup Guide
4
2
7421S.004
7421S.005
7421S.037
Program Version : 1.0.1
Pages Defined : 0
Formats Defined : 0, 4, 6
Fonts Defined : 0, 1, 2, 7, 20, 21, 22, 23, 24,
Graphics Defined : 1
PRINT SPEED - 2 ips RIBBON SAVE - Diabled
IMAGE BANDS - 6 SELF STRIP - Disabled
MAX LABEL LENGTH - inches CUTTER - Disabled
LABEL STOCK - Inter - label gap DARK ADJUST - 0
MEDIA TYPE - Direct Thermal X FORMS ADJUST - 0
MEDIA LENGTH - 0 inches Y FORMS ADJUST - 10
CHARACTER SET - US ASCII LABEL REST POINT - 0
TRANSLATION - Disabled SENSITIVITY - 180
EMULATION - Disabled
LABEL RETRACT - Enabled
BAUD RATE - 9800
DATA BITS - 7
MESSAGE LENGTH - 255
PARITY - Even
STOP BITS - 1
PROTOCOL - Xon/Xoff
DEVICE ADDRESS - A
INTERNAL OPTIONS - none
EXTERNAL OPTIONS - Self Strip
INTERMEC 7421 Printer
7421S.040
21
4
5
3

7421 Printer Setup Guide7421 Printer Setup Guide
7421S.036
7421 Hardware Configuration
: 120 kilobytes
: 134 kilobytes
: 600
: 221
: 0
: 832 dots
: 5.0 mil
: 0
: Centronix
: none
: Self Strip
: 7BB9
: 2148
: 059877
: 0.1
Memory Installed
Storage RAM
Image RAM
Mileage Inches Processed
Inches Burned
Labels Cut
PrintheadWidth
Dot Size
Burn Pot Setting
Hardware Options
I/O Option
Internal Option
External Option
Firmware Checksum
ROM0 (U9)
ROM1 (U8)
Program
Version
7421S.006
5
5
4
7421S.007
<3.9"
(99mm)
4"
(102mm)
20
7421S.038
2
3

7421 Printer Setup Guide7421 Printer Setup Guide
6
7421S.009
7
6
7421S.008
19
Printing the Test Labels
Impression des étiquettes de test
Drucken der Testetiketten
Stampa delle etichette di prova
Impresión de etiquetas de prueba
Imprimir as etiquetas de teste
7421S.030
1

7421 Printer Setup Guide7421 Printer Setup Guide
7
9
8
7421S.010
7421S.01
1
7421S.033
7421S.027
16
17
18

7421 Printer Setup Guide7421 Printer Setup Guide
7421S.012
8
7421S.013
11
10
7421S.030
7421S.031
14
15
17

7421 Printer Setup Guide7421 Printer Setup Guide
9
7421S.027
12
7421S.028
7421S.029
12
13
16

7421 Printer Setup Guide7421 Printer Setup Guide
7421S.026
10
Loading Thermal Transfer Ribbon and Media
Chargement du ruban de transfert thermique et du support
Laden von Thermotransfer-Farbband und -Medien
Caricamento di supporti e nastri termografici
Carga de etiquetas y cinta de transferencia térmica
Carregar mídia e fita de transferência térmica
7421S.004
1
SENSITIVITY NUMBER
5✩7
7421S.016
7421S.025
<3.9"
(99 mm)
4"
(102mm)
10
11
15

7421 Printer Setup Guide7421 Printer Setup Guide
7421S.006
11
7421S.005
2
3
14
7421S.024
7421S.020
9
8

7421 Printer Setup Guide7421 Printer Setup Guide
12
7421S.017
4
5
7421S.015
13
7421S.021
6
7
7421S.019

Intermec Technologies Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. technical and service support: 1-800-755-5505
U.S. media supplies ordering information: 1-800-227-9947
Canadian technical and service support: 1-800-687-7043
Canadian media supplies ordering information: 1-800-267-6936
Outside U.S. and Canada: Contact your local Intermec service supplier.
The information contained herein is proprietary and is provided solely
for the purpose of allowing customers to operate and/or service
Intermec manufactured equipment and is not to be released, reproduced,
or used for any other purpose without written permission of Intermec.
Information and specifications in this manual are subject to change
without notice.
© 1998—2000 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER,
Duratherm, Precision Print, PrintSet, Virtual Wedge, and CrossBar are
trademarks of Intermec Corporation.
Throughout this manual, trademarked names may be used. Rather than
put a trademark (™ or ®) symbol in every occurrence of a trademarked
name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of
infringement.
Electrical Rating x20V; 2,5A
Caractéristique électriques x20V; 2,5A
Elektrische Leistung x20V; 2,5A
Capacità nominale x20V; 2,5A
Información eléctrica x20V; 2,5A
Especificações elétricas x20V; 2,5A
x20V; 2,5A