Intimus CR-460 MC Operational manual

Manual Creasing Machine
intimus CR-460 MC
Product user manual
intimus International GmbH
Bergheimer Straße 6-12
88677 Markdorf
Germany
www.intimus.com 95517 1 12/18

intimus CR-460 MC 1
1
1. Components Names
7
5 6
4 2
1 3
Machine Structure
1. Fixed position vernier 2. Moving position vernier
3. Vernier lock 4. Position ruler 5. Operation platform
6. Creasing handle 7. Mechanism core protection cover
2. Technical Parameter
Function/Model
Working Width 460mm
Working Thickness ＜0.36mm
Impress Width 1.3mm
Impress Thickness 0.4mm
Machine Size
Machine Weight
3. Installation Instructions
Installation Location
Before the installation, please put the machine on an appropriate operation platform,
leave enough operation space and be sure to set the machine up stable.
60X49.5X16cm
10.2kgs
CR-460 MC

4. Operation Instructions
Please read the manual carefully before using Creasing Machine
One operator is required when the machine is working
Please do not push the handle strongly, in case any damage
occurred for the machine, which will shorten its usage
Operation Procedures
·Mack sure the position and size of the creasing first, if only one piece of creasing
is needed, fix the position of right-side Slide Positioning Model according to the
creasing size.
·If two piece of creasing is needed, i.e. book spine creasing and reading creasing:
make sure the position of book spine creasing first, move the right-side Slide
Positioning Model to that position and fix, then move the left-side Slide Position
model to correct position and fix according to the reading creasing size and
position.
When moving the Slide Positioning Model to the needed position,
please push its head there, and fixed the screws manually, then the
model is fixed there, in case the creasing position is not exact
·When the Slide Positioning Model is fixed in the need position, put down the
creasing papers from Mechanism core protection cover and rely it on the fixed
Slide Positioning Model back side.
·If only one piece of creasing is needed, move the paper rightward, and rely it on
the fixed right-side Slide Positioning Model right side. Push the operation handle
downward, hold it up, and take out of creasing paper. Creasing is ready.
·If two piece of creasing is needed, move the paper rightward first, and rely it on the
fixed right-side Slide Positioning Model right side. Push the operation handle
downward, hold it up, and then move the paper leftward, rely it on the left-side
Slide Positioning Model left side. Push the operation handle downward, hold it up,
and take out of creasing paper. Creasing is ready.
22intimus CR-460 MC