INVENTOR V1MFI-66B User manual

• USER’S MANUAL
• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ
• MANUAL UTILIZATORULUI
MODELS:
REMOTE CONTROLLER
V1MFI-66B/ V1MFO-66B | V4MFI-66B/V4MFΟ-66B
V4MCRI-12/U4MRS-12 | V4MCRI-18/U4MRS-18
V4MCI-24UR/U4MRS-24 | V4MCI-36UR/U4MRS-36
V4MCI-42/U4MRT-42 | V4MCI-50UR/U4MRT-50
V4MCI-60UR/U4MRT-60
V4MKI-18/U4MRS-18 | V4MKI-24UR/U4MRS-24
V4MKI-36UR/U4MRS-36 | V4MKI-42/U4MRT-42
V4MKI-50/U4MRT-50 | V4MKI-60/U4MRT-60
V4MLI-12/V4MLO-12 | V4MLI-18/V4MLO-18
V4MDI-12B/U4MRS-12B
V4MFI-24/ V4MFO-24 | V1MFI-50B/ V1MFO-50B
V5MFI-66/V6MFO-66

11CONTENTS22
ModelRated Voltage8m 3.0V(Dry batteries R03/LR03×2)
OO
-5C~60CRG57B2/BGE
Remote Controller Specifications
Environment
Signal Receiving Range
MODE
FAN
TEMP
SLEEP TURBOLED
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
NOTE: Buttons design is based on typical model and might be slightly different from the actual one you purchased，the actual shape shall prevail.All the functions described are accomplished by the unit. If the unit has no this feature, there is no corresponding operation happened when press the relative button on the remote controller. When there are wide differences between Remote controller Illustration and USER'S MANUAL on function description, the description of USER'S MANUAL shall prevail.,,,,,,
,,,,,,
23677788913Handling the remote controller ......................................................Remote controller Specifications...................................................Operation buttons .................. .........................................................Indicators on LCD ..........................................................................How to use the buttons ................................................................. Auto operation.................................................................................Cooling/Heating/Fan operation......................................................Dehumidifying operation ...............................................................Adjusting air flow direction............................................................Timer operation...............................................................................

11CONTENTS22
ModelRated Voltage8m 3.0V(Dry batteries R03/LR03×2)
OO
-5C~60CRG57B2/BGE
Remote Controller Specifications
Environment
Signal Receiving Range
MODE
FAN
TEMP
SLEEP TURBOLED
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
NOTE: Buttons design is based on typical model and might be slightly different from the actual one you purchased，the actual shape shall prevail.All the functions described are accomplished by the unit. If the unit has no this feature, there is no corresponding operation happened when press the relative button on the remote controller. When there are wide differences between Remote controller Illustration and USER'S MANUAL on function description, the description of USER'S MANUAL shall prevail.,,,,,,
,,,,,,
23677788913Handling the remote controller ......................................................Remote controller Specifications...................................................Operation buttons .................. .........................................................Indicators on LCD ..........................................................................How to use the buttons ................................................................. Auto operation.................................................................................Cooling/Heating/Fan operation......................................................Dehumidifying operation ...............................................................Adjusting air flow direction............................................................Timer operation...............................................................................

3344
MODEMODE
FANFAN
TEMPTEMP
ON/OFFON/OFF
SHORT CUTSHORT CUT
TIMER ONTIMER ONTIMER OFFTIMER OFF
112244
33
77
8866
55
99101011111212
12
Press this button to modify the air conditioner mode in a sequence of following:
3
MODE Button
45
ON/OFF ButtonThis button turns the air conditioner ONand OFF.
AUTO COOL
DRY
HEATFAN
Used to select the fan speed in four steps: AUTO LOW MED HIGH FAN Button SLEEP Button
NOTE: While the unit is running under SLEEPmode, it would be cancelled if MODE, FAN SPEED or ON/OFF button is pressed.
Active/Disable sleep function. It can maintain the most comfortable temperature and save energy. This function is available on COOL, HEAT or AUTO mode only .For the detail, see sleep operation in USER S MANUAL. ,
,,,,
,,,,NOTE：Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance.
NOTE: You can not switch the fan speed in AUTO or DRY mode.
Operation of buttons
SHORTCUT Button TIMER ON Button TIMER OFF Button Used to restore the current settings or resume previous settings.On the first time connecting to the power, if push the SHORTCUT button, the unit Owill operate on AUTO mode, 26C, and fan speed is Auto.Push this button when remote controller is on, the system will automatically revert back to the previous settings including operating mode, setting temperature, fan speed level and sleep feature(if activated). If pushing more than 2 seconds, the system will automatically restore the current operation settings including operating mode, setting temperature, fan speed level and sleep feature(if activated ).
UP Button( )
Push this button to decrease the indoor ootemperature setting in 1 C increments to 17 C.
DOWN Button( )
6897
Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0.0.
Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0.0Push this button to increase the indoor ootemperature setting in 1 C increments to 30 C.
Operation of buttons
NOTE：Temperature contol is not availablein Fan mode.TURBO Button
Active/Disable Turbo function. Turbo function enables the unit to reach the preset temper-ature at cooling or heating operation in the shortest time(if the indoor unit does not support this function, there is no corresponding operation happened when pressing this button.)
SLEEP SLEEP TURBOTURBOLEDLED

3344
MODEMODE
FANFAN
TEMPTEMP
ON/OFFON/OFF
SHORT CUTSHORT CUT
TIMER ONTIMER ONTIMER OFFTIMER OFF
112244
33
77
8866
55
99101011111212
12
Press this button to modify the air conditioner mode in a sequence of following:
3
MODE Button
45
ON/OFF ButtonThis button turns the air conditioner ONand OFF.
AUTO COOL
DRY
HEATFAN
Used to select the fan speed in four steps: AUTO LOW MED HIGH FAN Button SLEEP Button
NOTE: While the unit is running under SLEEPmode, it would be cancelled if MODE, FAN SPEED or ON/OFF button is pressed.
Active/Disable sleep function. It can maintain the most comfortable temperature and save energy. This function is available on COOL, HEAT or AUTO mode only .For the detail, see sleep operation in USER S MANUAL. ,
,,,,
,,,,NOTE：Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance.
NOTE: You can not switch the fan speed in AUTO or DRY mode.
Operation of buttons
SHORTCUT Button TIMER ON Button TIMER OFF Button Used to restore the current settings or resume previous settings.On the first time connecting to the power, if push the SHORTCUT button, the unit Owill operate on AUTO mode, 26C, and fan speed is Auto.Push this button when remote controller is on, the system will automatically revert back to the previous settings including operating mode, setting temperature, fan speed level and sleep feature(if activated). If pushing more than 2 seconds, the system will automatically restore the current operation settings including operating mode, setting temperature, fan speed level and sleep feature(if activated ).
UP Button( )
Push this button to decrease the indoor ootemperature setting in 1 C increments to 17 C.
DOWN Button( )
6897
Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0.0.
Press this button to initiate the auto-off time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-off time to 0.0Push this button to increase the indoor ootemperature setting in 1 C increments to 30 C.
Operation of buttons
NOTE：Temperature contol is not availablein Fan mode.TURBO Button
Active/Disable Turbo function. Turbo function enables the unit to reach the preset temper-ature at cooling or heating operation in the shortest time(if the indoor unit does not support this function, there is no corresponding operation happened when pressing this button.)
SLEEP SLEEP TURBOTURBOLEDLED

101112
Operation of buttons
Swing Button Swing Button
Used to stop or start horizontal louver move-ment or set the desired up/down air flowdirection. The louver changes 6 degree in angle for each press. If keep pushing more than 2 seconds, the louver will swing up and down automatically. Used to stop or start vertical louver movement and set the desired left/right air flow direction.The vertical louver changes 6 degree in anglefor each press. And the temperature display area of indoor unit displays for one second. If keep pushing more than 2 seconds, the vertical louver swing feature is activated. And the display area of indoor unit displays , flashes four times, then the tempera-IIIIture setting reverts back. If the vertical louver swing feature is stopped, it displays LC and remains on for 3 seconds.NOTE: For some units , the indoor units display when the swing feature is activated, and display when the swing feature is stopped.
,,
,,
LED ButtonDisable/Active indoor screen Display. When pushing the button, the indoor screen display is cleared, press it again to light the display.
Indicators on LCD
Fan speed indicationMode display
Information are displayed whenthe remote controller is powered up.Displayed when data transmitted.Displayed when remote controller is ON.Battery display(low battery detection)Not available for this unitNot available for this unitLow speed Medium speed High speed Auto fan speed
Note:of clear presentation. But during the actual operation only the relative functional signs are shown on the display window.All indicators shown in the figure are for the purpose
Displayed when TIMER ON time is set.Displayed in Sleep Mode operation.Not available for this unitNot available for this unitDisplayed when TIMER OFF time is set.Show set temperature or room temperature, or time under TIMER setting.
AUTOHEAT FANCOOL DRY5566
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
124
3
7
86
5
9101112
SLEEP TURBOLED
,,
,,

101112
Operation of buttons
Swing Button Swing Button
Used to stop or start horizontal louver move-ment or set the desired up/down air flowdirection. The louver changes 6 degree in angle for each press. If keep pushing more than 2 seconds, the louver will swing up and down automatically. Used to stop or start vertical louver movement and set the desired left/right air flow direction.The vertical louver changes 6 degree in anglefor each press. And the temperature display area of indoor unit displays for one second. If keep pushing more than 2 seconds, the vertical louver swing feature is activated. And the display area of indoor unit displays , flashes four times, then the tempera-IIIIture setting reverts back. If the vertical louver swing feature is stopped, it displays LC and remains on for 3 seconds.NOTE: For some units , the indoor units display when the swing feature is activated, and display when the swing feature is stopped.
,,
,,
LED ButtonDisable/Active indoor screen Display. When pushing the button, the indoor screen display is cleared, press it again to light the display.
Indicators on LCD
Fan speed indicationMode display
Information are displayed whenthe remote controller is powered up.Displayed when data transmitted.Displayed when remote controller is ON.Battery display(low battery detection)Not available for this unitNot available for this unitLow speed Medium speed High speed Auto fan speed
Note:of clear presentation. But during the actual operation only the relative functional signs are shown on the display window.All indicators shown in the figure are for the purpose
Displayed when TIMER ON time is set.Displayed in Sleep Mode operation.Not available for this unitNot available for this unitDisplayed when TIMER OFF time is set.Show set temperature or room temperature, or time under TIMER setting.
AUTOHEAT FANCOOL DRY5566
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
124
3
7
86
5
9101112
SLEEP TURBOLED
,,
,,

77
How to use the buttons
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available. 1. Press the MODE button to select COOL, HEAT(cooling & heating models only) or FAN mode.2. Press the UP/DOWN buttons to set the desired temperature. The temperature can OOO be set within a range of 17C~ 30C in 1C increments.3. Press the FAN button to select the fan speed in four steps- Auto, Low, Med,or High. 4. Press the ON/OFF button to start the air conditioner.
In the FAN mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.
NOTE
Auto operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.1. Press the MODE button to select Auto.2. Press the UP/DOWN button to set the desired temperature. The temperature can OOO be set within a range of 17C~ 30C in 1C increments.3. Press the ON/OFFbutton to start the air conditioner.
1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller.2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.
NOTE
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
41
3
2
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
31
2
Dehumidifying operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.1. Press the MODE button to select DRY mode.2. Press the UP/DOWN buttons to set the desired temperature. The temperature OO can be set within a range of 17C~ 30CO in 1C increments.3. Press the ON/OFF button to start the air conditioner.
In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.
NOTE
Adjusting air flow direction
Use the SWING & button to adjust the desired airflow direction. 1. Up/Down direction can be adjusted with the button on the remote controller. Each time when you press the button, the louver moves an angle of 6 degree. If pressing more than 2 seconds ,the louver will swing up and down automatically.2. Left/Right direction can be adjusted with the button on the remote controller. Each time when you press the button, the louver moves an angle of 6 degree. If pressing more than 2 seconds ,the louver will swing up and down automatically.NOTE: When the louver swing or move to a position which would affect the cooling or heating effect of the air conditioner, it would automatically change the swing/moving direction.
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
31
2
How to use the buttons
7788
SLEEP SLEEP SLEEP TURBOTURBOTURBOLEDLEDLED

77
How to use the buttons
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is available. 1. Press the MODE button to select COOL, HEAT(cooling & heating models only) or FAN mode.2. Press the UP/DOWN buttons to set the desired temperature. The temperature can OOO be set within a range of 17C~ 30C in 1C increments.3. Press the FAN button to select the fan speed in four steps- Auto, Low, Med,or High. 4. Press the ON/OFF button to start the air conditioner.
In the FAN mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.
NOTE
Auto operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.1. Press the MODE button to select Auto.2. Press the UP/DOWN button to set the desired temperature. The temperature can OOO be set within a range of 17C~ 30C in 1C increments.3. Press the ON/OFFbutton to start the air conditioner.
1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller.2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.3. If the Auto mode is not comfortable for you , the desired mode can be selected manually.
NOTE
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
41
3
2
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
31
2
Dehumidifying operation
Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing.1. Press the MODE button to select DRY mode.2. Press the UP/DOWN buttons to set the desired temperature. The temperature OO can be set within a range of 17C~ 30CO in 1C increments.3. Press the ON/OFF button to start the air conditioner.
In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.
NOTE
Adjusting air flow direction
Use the SWING & button to adjust the desired airflow direction. 1. Up/Down direction can be adjusted with the button on the remote controller. Each time when you press the button, the louver moves an angle of 6 degree. If pressing more than 2 seconds ,the louver will swing up and down automatically.2. Left/Right direction can be adjusted with the button on the remote controller. Each time when you press the button, the louver moves an angle of 6 degree. If pressing more than 2 seconds ,the louver will swing up and down automatically.NOTE: When the louver swing or move to a position which would affect the cooling or heating effect of the air conditioner, it would automatically change the swing/moving direction.
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
31
2
How to use the buttons
7788
SLEEP SLEEP SLEEP TURBOTURBOTURBOLEDLEDLED

21
Timer operation
Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit.1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation.2. Push the TIMER ON button again to set desired Auto-on time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.3. After setting the TIMER ON ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "h" will disappear and the set temperature will re-appear on the LCD display window. To set the Auto-on time.To set the Auto-off time.1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the last Auto-off setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-off time to stop the operation.2. Push the TIMER OFF button again to set desired Auto-off time. Each time you press the button, the time increases by half an hour between 0 and 10 hours and by one hour between 10 and 24 hours.3. After setting the TIMER OFF ,there will be a one second delay before the remote controller transmits the signal to the air conditioner. Then, after approximately another 2 seconds, the signal "H " will disappear and the set temperature will re-appear on the LCD display window.
MODE
FAN
TEMP
ON/OFF
SHORT CUT
TIMER ONTIMER OFF
When you select the timer operation, the remote controller automatically transmits the timer signal to the indoor unit for the specified time. Therefore, keep the remote controller in a location where it can transmit the signal to the indoor unit properly. The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.
CAUTION
!Example of timer settingStartOff6 hours later(Auto-on Operation)The TIMER ON feature is useful when you want the unit to turn on automatically before you return home. The air conditioner will automatically start operating at the set time.To start the air conditioner in 6 hours.1. Press the TIMER ON button, the last setting of starting operation time and the signal "H" will show on the display area.2. Press the TIMER ON button to display "6.0H " on the TIMER ON display of the remote controller.3. Wait for 3 seconds and the digital display area will show the temperature again. The "TIMER ON" indicator remains on and this function is activated. TIMER ONExample:
Set
991100
SLEEP TURBOLED