involight MATRIX559 User manual

COB Matrix 5*5, Tri-3W
User Manual
Our COB light offers many possibilities to achieve very nice laser effects which you want. It is specially designed
for the stages, disco, night clubs etc. Please read the manual before operation.
A. SPECIFICATION
1. Voltage: AC 100V~240V, 50Hz/60Hz
2. Power consumption: 240W
3. Current: 2.15A/110V, 1A/240V
4. Beam angle: 55 degree
5. LEDs : COB 25pcs 3-in-1
6. Working temperature: -10℃~40℃
7. DMX channels: 3, 5, 7 CH
8. DMX linking: 3-pin, 5-pin
9. Lumen: R 405 lux@2m
G 682 lux@2m
B 750 lux@2m
RGB 1644 lux@2m
10. Power linking: 3pcs/110V, 7pcs/240V
B. OPERATION
There are six working modes to select: Press the “MODE” button can switch the working mode.
1. Built-in Programs Mode
1) Press the “MODE”, enter built-in programs mode menu “RUN PROGRAM: 01 1: R FS:000”; Press “UP”and
“DOWN”to select the operation programs effect “RUN PROGRAM: 01 - RUN PROGRAM: 19”;
2) Press the “SETUP”, enter operation programs select the menu “RUN PROGRAM: 01”;
3) Press the “UP”or “DOWN”, enter to static color “1.R”; Press “UP”and “DOWN”to select “1.R”, “2.RG”,
“3.G”, “4.GB”, “5.B”, “6.RB”, “7.RGB”, “8.OFF”. Press “SETUP”enter to set the strobe menu: FS:000, Press
“UP”and “DOWN”to select the speed “FS:00-FS100”
4) When it is in “RUN PROGRAM: 02 - RUN PROGRAM: 19”, enter to setup the programs operation speed menu
“SP: 092”; Press the “UP”or “DOWN”, set the speed value “SP: 001 –SP: 100”;
6) Press the “SETUP”, enter to setup the strobe programs operation menu “FS: 000”;
7) Press the “UP”or “DOWN”, set the strobe value “FS:000 - FS:100”;
2. Auto Running Mode
1) Press the “MODE”, enter auto running mode menu “AUTO times: 002 SP: 092 FS: 000”;

2) Press “SETUP”, enter the setup menu of the auto running programs time “AUTO times: 001”;
3) Press the UP”or “DOWN”, to setup the auto running programs time value “times: 001 - times: 100”;
4) Press the “SETUP”, enter the speed menu of setup auto running programs “SP: 092”;
5) Press the “UP”or “DOWN”, set the speed value “SP：001 –SP: 100”;
6) Press the “SETUP”, enter the strobe menu of auto running programs “FS: 000”;
7) Press the “UP”or “DOWN”, setup the strobe value “FS: 000 - FS:100”;
3. Sound-Active Mode
1) Press the “MODE, enter sound-active running mode “SOUND TRIGGER sensitivity: 31”;
2) Press the “UP”or “DOWN”, set the sound-active mode sensitivity value “sensitivity: 00 –sensitivity: 31”;
4. DMX Mode
1) Press the “MODE”, enter to DMX mode menu “DMX address: 001 channel: 03 CHs”;
2) Press the “SETUP”, enter to setup the DMX address value “address: 001”;
3) Press the “UP”or “DOWN”, setup the DMX address value “address: 001 –address: 512”;
4) Press the “SETUP”, enter to DMX working mode menu “channels: 03 CHs”;
5) Press the “UP”or “DOWN”, to setup the DMX working mode: “03 CHs”,“05 CHs”, “75 CHs
DMX mode1: 3 CH
CH1
CH2
CH3
NO.
DMX
value
FUNCTION
SPEED
FLASH
1
0
OFF
NO USE
NO USE
2
1—12
PROGRAM01
SPEED
0--255
FLASH
0--255
3
13—25
PROGRAM02
4
26—38
PROGRAM03
5
39—51
PROGRAM04
6
52—64
PROGRAM05
7
65—77
PROGRAM06
8
78—90
PROGRAM07
9
91—103
PROGRAM08
10
104—116
PROGRAM09
11
117—129
PROGRAM10
SPEED
0--255
FLASH
0--255
12
130—142
PROGRAM11
13
143—155
PROGRAM12
14
156—168
PROGRAM13
15
169—181
PROGRAM14
16
182—194
PROGRAM15
17
195—207
PROGRAM16
18
208—220
PROGRAM17
19
221—233
PROGRAM18
20
234—255
SOUND
Sensitivity
0--255
NO USE

DMX mode2: 5 CH
CH1
CH2
CH3
CH4
CH5
Red 0-255
Green 0-255
Blue 0-255
Dim 0-255
Flash 0-255
DMX mode3: 75 CH
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
CH7
CH8
CH9
CH10
CH11
CH12
Red 3
Green 3
Blue 3
Red 4
Green 4
Blue 4
CH13
CH14
CH15
CH16
CH17
CH18
Red 5
Green 5
Blue 5
Red 6
Green 6
Blue 6
CH19
CH20
CH21
CH22
CH23
CH24
Red 7
Green 7
Blue 7
Red 8
Green 8
Blue 8
CH25
CH26
CH27
CH28
CH29
CH30
Red 9
Green 9
Blue 9
Red 10
Green 10
Blue 10
CH31
CH32
CH33
CH34
CH35
CH36
Red 11
Green 11
Blue 11
Red 12
Green 12
Blue 12
CH37
CH38
CH39
CH40
CH41
CH42
Red 13
Green 13
Blue 13
Red 14
Green 14
Blue 14
CH43
CH44
CH45
CH46
CH47
CH48
Red 15
Green 15
Blue 15
Red 16
Green 16
Blue 16
CH49
CH50
CH51
CH52
CH53
CH54
Red 17
Green 17
Blue 17
Red 18
Green 18
Blue 18
CH55
CH56
CH57
CH58
CH59
CH60
Red 19
Green 19
Blue 19
Red 20
Green 20
Blue 20
CH61
CH62
CH63
CH64
CH65
CH66
Red 21
Green 21
Blue 21
Red 22
Green 22
Blue 22
CH67
CH68
CH69
CH70
CH71
CH72
Red 23
Green 23
Blue 23
Red 24
Green 24
Blue 24
CH73
CH74
CH75
Red 25
Green 25
Blue 25
5. Master/slave Mode
Press the “MODE”, enter the master/slave operation mode “SLAVE MODE ================”.
6. Static Color
1) Press the “MODE”, enter to static color mode “STATIC COLOR R255 G255 B255”;
2) Press the “SETUP”, enter into red brightness settings menu “R255”;
3) Press the “UP” or “DOWN”, set the red brightness “R000 - R255”;
4) Press the “SETUP”, enter into green brightness settings menu “G255”;
5) Press the “UP” or “DOWN”, set the green brightness “G000 - G255”;
6) Press the “SETUP”, enter into red brightness settings menu “B255”;
7) Press the “UP” or “DOWN”, set the red brightness “B000 - B255”;
NOTE: if no button operation in 20 seconds, the display panel will darkened (disable display）; in the state of

display panel darken, press any button, will show the current state, in the display state, can adjust the working mode
and operation state.