involight LEDSTROB18 User manual

MY-038

MY-038
DMX LED lstrobe,18*1W
Our DMX LED istrobe offers many possibilities to achieve the effects which you want. It is for DJs, bands, nightclubs and other
performers who want a complete LED wash light system. Please read the manual before operation.
Power Input: 100V AC~240V AC,50Hz/60；
LEDs: 1W*18, cool white
Consumption: 25W
DMX Channel: 3CHs
Four working modes:
Sound active mode
M/S mode
DMX mode
Dimming mode
Ⅰ，Sound active mode
1，Press MODE button to enter into sound active mode “SE.x”.
2，Press UP or DOWN button to adjust the sensitivity of sound control “SE.0～SE.9”.
3，Potentionmeter could be used to adjust the sound active sensitivity ,clockwise
rotation could wake the hight sensitivity ,and contrarotate to low sensitivity.
Ⅱ,M/S mode
1，Press MODE button to enter into M/S mode “SLA”.
Ⅲ,DMX 模式 DMX mode
1，Press MODE button to enter into DMX mode “d--.”.
2，Press SETUP button to enter into DMX address setting condition“xxx.”.
3，Press UP or DOWN button to set DMX address “001.～512.”.
DMX mode control table
CH1
CH2
CH3
FUNCTION

MY-038
Dim 0-255
Flash 0-255
0-9
Dim & Flash
No use
Sensitivity
10-255
Sound
Ⅳ,Dimming mode
1，Press MODE button to enter into dimming condition “CON”.
2，Press SETUP button to enter into brightness control condition “xxx”.
3，Press UP or DOWN button to adjust brightness “000~255”.
4，Press SETUP button to enter into strobe speed’s adjustment condition “F.xx”.
5，Press UP or DOWN button to adjust the strobe speed “F.00～F.30”.

MY-038

MY-038

MY-038