involight LED Mixmaster LEDSPOT433 User manual

LED Mixmaster 4*tri-3W
User Manual
Our LED Mixmaster have very nice effect, suitable for shops, BARs, hotels, exhibitions and
soon .please read the manual before operation.
A. SPECIFICATION
1. Power Input: AC 110V~240V, 50Hz/60Hz
2. Power Consumption: < 14W
3. LED: 3WRGB*4
4. Dimension: 120 * 87 * 172.5 mm
5. Operation mode: Dip switch
B. OPERATION
Four modes could be chose via dip switch: Built-in programs, M/S mode, DMX mode & Sound
Active.
The functions of dip switch:
#10: this switch should be ON for master mode.
#9: this switch should be ON for sound-active mode. (When #10 OFF, #8 OFF is effective.)
#8: to check the switch run well or not. (When #10 OFF is effective)
#6, #7: effective under the M/S mode, the speed could be chosen
#5: static color and dynamic effect could be selected under master mode, OFF-dynamic effect,
ON-static color.
#1, #2, #3, #4: if #5 is OFF, these four switches could be selected for dynamic effect, and could be
selected for different static color if #5 is ON.
1) Master mode: could choose dynamic or static state
When #10, #9，#8 is OFF, enter the master mode
When #5 is OFF, static mode; #1, #2, #3, #4 choose different modes, #6, #7 choose speed
When #5 is ON, Static mode; #1 ON , red bright, #1 OFF, red extinguish; #2 ON green bright, #2
OFF, green extinguish; #3 ON, blue bright, #3 OFF, blue extinguish
Table 1

Dip Switch Function Table：（#1--#10 □—OFF ■—ON ×-- Not care）
Master mode
Dynamic Effect
Static Color
Dip Switch Status
Specification
Dip Switch
Status
Specification
□□□□□××□□□
Jumping change &
gradual change will be
looped operation
□□□×■××□□□
Blackout□
■□□□□××□□□
Jumping change of 3
colors
■□□×■××□□□
red □
□■□□□××□□□
Jumping change of 7
colors
□■□×■××□□□
Green □
■■□□□××□□□
Other jumping change
■■□×■××□□□
yellow □
□□■□□××□□□
Gradual change of 3
colors
□□■×■××□□□
blue □
■□■□□××□□□
Gradual change of
7colors
■□■×■××□□□
purple □
□■■□□××□□□
Other gradual change
□■■×■××□□□
cyan □
×××■□××□□□
strobe of 7 color
■■■×■××□□□
white□
Speed set up (only be available under the status of
dynamic effect)
×××××□□×××
Speed 1 (fastest)
×××××■□×××
Speed 2
×××××□■□××
Speed 3
×××××■■□××
Speed 4(slowest)
Slave Mode
□□□□□□□□□■
DMX mode
#1#2#3#4#5#6#7#8#9■
#1--#9 DMX address, see table 3
Sound-active mode
×××××××□■□
Dip switch testing mode
×××××××□×■
2）Slave Mode
#1--#9 is off; the fixture is in slave mode.
Dip switch status（#1--#10 □—OFF ■—ON ）
□□□□□□□□□■
3)Sound-Active Mode
The fixture will run the built in program slow while there is no music, and the light will be

changed by the beat while there is music on.
Dip switch status: (#1--#10 □—OFF ■—ON ×-- Not care)
×××××××□■□
4). DMX Mode
DMX channel:
The fixture will run the built in program if no DMX signal is input, and will be entered into DMX
mode if there is DMX signal be input.
#10 chooses ON,
Dip switch status: (#1--#10 □—OFF ■—ON #1 --#9 set up the DMX address)
#1#2#3#4#5#6#7#8#9■
1) DMX Function Table
Table 2
CH Val ue Funct i on
1 0- 255 red 0-100%
2 0- 255 green 0-100%
3 0- 255 blue 0-100%
4 0- 255 general dimming 0-100%
0- 10 no function
11- 255 strobe
0- 10 no function
11- 255 sound active
5
6
2) DMX address setup
#1 --#9 to set up the DMX address
Table3

#9 □ □ □ □ □ □ □ □ ■ ■ ■ ■ ■ ■ ■ ■
#8 □ □ □ □ ■ ■ ■ ■ □ □ □ □ ■ ■ ■ ■
#7 □ □ ■ ■ □ □ ■ ■ □ □ ■ ■ □ □ ■ ■
#6 □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■ □ ■
#1 #2 #3 #4 #5
□ □ □ □ □ × 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480
■□□□□ 133 65 97 129 161 193 225 257 289 321 353 385 417 449 481
□■□□□ 234 66 98 130 162 194 226 258 290 322 354 386 418 450 482
■■□□□ 335 67 99 131 163 195 227 259 291 323 355 387 419 451 483
□□■□□ 436 68 100 132 164 196 228 260 292 324 356 388 420 452 484
■□■□□ 537 69 101 133 165 197 229 261 293 325 357 389 421 453 485
□■■□□ 638 70 102 134 166 198 230 262 294 326 358 390 422 454 486
■■■□□ 739 71 103 135 167 199 231 263 295 327 359 391 423 455 487
□□□■□ 840 72 104 136 168 200 232 264 296 328 360 392 424 456 488
■□□■□ 941 73 105 137 169 201 233 265 297 329 361 393 425 457 489
□■□■□ 10 42 74 106 138 170 202 234 266 298 330 362 394 426 458 490
■■□■□ 11 43 75 107 139 171 203 235 267 299 331 363 395 427 459 491
□□■■□ 12 44 76 108 140 172 204 236 268 300 332 364 396 428 460 492
■□■■□ 13 45 77 109 141 173 205 237 269 301 333 365 397 429 461 493
□■■■□ 14 46 78 110 142 174 206 238 270 302 334 366 398 430 462 494
■■■■□ 15 47 79 111 143 175 207 239 271 303 335 367 399 431 463 495
□□□□■ 16 48 80 112 144 176 208 240 272 304 336 368 400 432 464 496
■□□□■ 17 49 81 113 145 177 209 241 273 305 337 369 401 433 465 497
□■□□■ 18 50 82 114 146 178 210 242 274 306 338 370 402 434 466 498
■■□□■ 19 51 83 115 147 179 211 243 275 307 339 371 403 435 467 499
□□■□■ 20 52 84 116 148 180 212 244 276 308 340 372 404 436 468 500
■□■□■ 21 53 85 117 149 181 213 245 277 309 341 373 405 437 469 501
□■■□■ 22 54 86 118 150 182 214 246 278 310 342 374 406 438 470 502
■■■□■ 23 55 87 119 151 183 215 247 279 311 343 375 407 439 471 503
□□□■■ 24 56 88 120 152 184 216 248 280 312 344 376 408 440 472 504
■□□■■ 25 57 89 121 153 185 217 249 281 313 345 377 409 441 473 505
□■□■■ 26 58 90 122 154 186 218 250 282 314 346 378 410 442 474 506
■■□■■ 27 59 91 123 155 187 219 251 283 315 347 379 411 443 475 507
□□■■■ 28 60 92 124 156 188 220 252 284 316 348 380 412 444 476 508
■□■■■ 29 61 93 125 157 189 221 253 285 317 349 381 413 445 477 509
□■■■■ 30 62 94 126 158 190 222 254 286 318 350 382 414 446 478 510
■■■■■ 31 63 95 127 159 191 223 255 287 319 351 383 415 447 479 511
Dmx Swi t ch Set
■ =ON □ =OFF
× =Not Use
5) Dip Switch testing mode
#10 is OFF, #8 choose ON, enter the dip switch testing mode
#1--#7, #9，once choose OFF or ON, the color will change accordingly. It indicate that the dip
switch is normal. If the LED color did not change, it shows that the function digit is abnormal
Example: #1 used to be OFF, set #1 as ON. If the color change, #1 is normal. Otherwise, it is
abnormal.