involight LED STROB500 User manual

INVOLIGHT LED STROB500
USER MANUAL

LED strobe panel, 448*SMD5050
User Manual
Our LED strobe panel offers many possibilities to achieve the effects which you want. It is suitable for DJs, bands,
nightclubs and other performers who want LED stage light. Please read the manual before operation.
A. SPECIFICATION
1. Voltage:AC 100V/260V, 50Hz/60Hz
2. Power consumption: 105W (Max)
3. LED: 448* SMD5050 white LED
4. Color temperature: 6900K
5. Operation mode: LED display
6. Weight: 3.6KGS
7. Size: 36*26.35*9.6 CM
B. OPERATION
There are five modes to choose:
Built-in programs
Dimming mode
Sound active
DMX mode
Slave mode
The button function instruction
1) Press the button lightly: the time of press the button and loosen less than 0.7 second
2) Long press the button: press the button more than 0.7 second
Sheet 1 Button function instruction
BUTTON
FUNCTION
MODE
Press lightly
LED mode switch inbuilt-in programs, dimming mode,
sound active, DMX mode, slave mode
/enter to setting menu, lightly press to back to the
superior menu( set corresponding LED mode)
SETUP
Press lightly
Enter the setting menu in this mode
Long press
Enter the system menu options
UP
Press lightly
Setting option add 1 / switch ON
Long press
Setting options continuous add 1
DOWN
Press lightly
Setting options reduce 1 / switch OFF
Long press
Setting options continuous reduce 1

1. Built-in Programs Mode
Press the “MODE”, enter built-in programs mode menu, press the “UP” or “DOWN”, select the built-in programs
~ . Sheet 2 Built-in programs description
Built-in programs
Description
Strobe programs 1
Strobe programs 2
Auto running effect
Lightly press the “SETUP” to set the built-in program.
Sheet 3 Built-in programs settings
Built-in
programs
Setting options
description
Through UP or DOWN set the frequency(1—15Hz )
Through UP or DOWN set the frequency(1—15Hz )
Through UP or DOWN set the auto running speed
(1—15 )
Through UP or DOWN set the brightness of the LED
(0-255 )
2. Dimming Mode
Press the “MODE”, the LED display will show as below, enter to LED dimming mode
Lightly press the “SETUP”, to set the lamp brightness.
Sheet 4 dimming mode settings
Settings options
Operation
LED dimming, through UP or DOWN adjust the brightness value
( 0—255 )
3. Sound-Active Mode
1) There are four sound programs: sound programs 1, sound programs 2, sound programs 3, and sound programs 4.
2) Press the “MODE” select the sound programs, through “UP”or “DOWN”select the built-in sound programs
~
3) Lightly press the “SETUP”, enter to sound programs settings, as below sheet.
Sheet 5 Sound active programs
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the LED brightness (0—255)
Press UP or DOWN set the sound active sensitivity(0—31 )
Press UP or DOWN set the LED brightness (0—255)

4. DMX Mode
Press the “MODE”, the LED display will show as below, enter to LED DMX mode main interface.
Lightly press the “SETUP”, enter into DMX address, DMX working mode setting.
Sheet 6 DMX mode settings
Setting options
Operation instruction
DMX address setting (1 -512), through UP or DOWN set the address
Through UP or DOWN select CH1, CH4, CH6, CH7 mode
Working mode 1:
Sheet 7 The DMX mode function sheet of CH3
CHANNELS VALUE FUNCTION
1 0-255
White(whole 0-100%
Working mode 2:
Sheet 8 The DMX mode function sheet of CH6
CHANNELS VALUE FUNCTION
1 0-255
part1(bottom right
2 0-255
part2(bottom left
3 0-255
part3(upper right
4 0-255
part4(upper left
Working mode 3:
CHANNELS VALUE FUNCTION
1 0-255
Part1(bottom right
2 0-255
Part2(bottom right
3 0-255
part3(upper right
4 0-255
part4(upper left
5 0-255 master dimming
0-9 no use
10-255 strobe, the greater the value,the higher the frequency
6
Working mode 4:
Sheet 9 The DMX mode function sheet of CH7
CHANNELS
VALUE FUNCTION
10-255
Part 1(bottom right
20-255
Part 2(bottom left
30-255
Part 3(upper right
40-255
Part 4(upper left
50-255 Master dimming
0-39 No use
40-59 Built-in programs 1
60-79 Built-in programs2
80-99 Built-in programs3
100-159 No use
160-179 Sound active 1
180-199 Sound active 2
200-219 Sound active 3
220-255 Sound active 4
70-255 Built-in programs: strobe or speed; sound active:sound active sensitivity
6

5. Master/slave Mode
Press the “MODE”, the LED display will show as below, enter LED slave mode.
C. System Options
In any state, long press the “SETUP”, enter the main interface of the system options:
Lightly press the “SETUP”, select the temperature protection switch options, PCB temperature inquires, LED
biggest gray, restore factory settings.
Setting details as below sheet:
Temperature
control
switch
options
Press UP, will show , open temperature control.
Press DOWN, will show , closed temperature.
PCB
temperature
options
Press DOWN or UP update temperature ,the current
temperature is 33℃
LED biggest
gray value
Press DOWN or UP update the LED newest brightness
(0—255).
Restore
factory
setting
Press UP to restore factory settings
On system options, lightly press the “MODE”, return to the system main interface , press the “MODE”
again, return before LED mode menu.
D. Restore Factory Settings
There are two kinds of methods to restore factory settings.
1) In menu system options , press the “UP” to restore factory settings.
2) When in power failure situation, press the “MODE” and “SETUP”, power on to restore factory settings.