involight MATRIX4415 User manual

COB Matrix 4*4, Tri-15W RGB
User Manual
Please read the manual before operation.
A. SPECIFICATION
1. Voltage:AC 100V/240V, 50Hz/60Hz
2. Power consumption: 230W
3. LED: 16pcs*15W RGB
4. Control feature: DMX mode, auto running, built-in programs, sound-active, slave mode, static color
5. Operation mode: LCD display
6. DMX channels: 2, 3, 5, 12, 24, 48 CH
7. Beam angle: 55 degree
8. Working temperature: -10℃~+40℃
9. Lumen: R 500LUX@2M
G 530LUX@2M
B630LUX@2M
RGB 1600LUX@2M
10.Power linking: 4pcs@110V, 8pcs@240V
11.Size: 363*340*148.5mm
12.Weight: 6.8 kgs
B. OPERATION
This series of product has rich effect programs, there are six working mode:
Built-in programs
Auto running
Sound-active
Slave mode
DMX mode
Static color
(When setup the program parameter, cursor stopped in these parameters; press the “UP”or “DOWN”, the
parameters will correspond changes)
1. Built-in Programs Mode
1) Press the “MODE”, enter built-in programs mode menu “RUN PROGRAM:01 SP:080 FS:000”;
2) Press the “SETUP”, enter operation programs select the menu “RUN PROGRAM:01”;
3) Press the “UP”or “DOWN”, select the operation programs effect “RUN PROGRAM: 01 - RUN PROGRAM:

25”;
4) Press the “SETUP”, enter to setup the programs operation speed menu “SP: 080”;
5) Press the “UP”or “DOWN”, set the speed value “SP: 001 –SP: 100”;
6) Press the “SETUP”, enter to setup the strobe programs operation menu “FS: 000”;
7) Press the “UP”or “DOWN”, set the strobe value “FS:000 - FS:100”;
2. Auto Running Mode
1) Press the “MODE”, enter auto running mode menu “AUTO times: 001 SP: 080 FS: 000”;
2) Press “SETUP”, enter the setup menu of the auto running programs time “AUTO times: 001”;
3) Press the UP”or “DOWN”, to setup the auto running programs time value “times: 001 - times: 100”;
4) Press the “SETUP”, enter the speed menu of setup auto running programs “SP: 080”;
5) Press the “UP”or “DOWN”, set the speed value “SP：001 –SP: 100”;
6) Press the “SETUP”, enter the strobe menu of auto running programs “FS: 000”;
7) Press the “UP”or “DOWN”, setup the strobe value “FS: 000 - FS:100”;
3. Sound-Active Mode
1) Press the “MODE, enter sound-active running mode “SOUND TRIGGER sensitivity: 20”;
2) Press the “UP”or “DOWN”, set the sound-active mode sensitivity value “sensitivity: 00 –sensitivity: 20”;
4. DMX Mode
1) Press the “MODE”, enter to DMX mode menu “DMX address: 001 channel: 02 CHs”;
2) Press the “SETUP”, enter to setup the DMX address value “address: 001”;
3) Press the “UP”or “DOWN”, setup the DMX address value “address: 001 –address: 512”;
4) Press the “SETUP”, enter to DMX working mode menu “channels: 02 CHs”;
5) Press the “UP”or “DOWN”, to setup the DMX working mode:
“02 CHs”, “03 CHs”,“05 CHs”, “12 CHs”, “24 CHs”, “48 CHs”;
DMX mode 1: 02 CHs
CH1
CH2
NO.
Value
FUNCTION
1
0
OFF
--
2
1—7
R
3
8—15
RG
4
16—23
G
5
24—31
GB
6
32—39
B
7
40—47
RB
8
48—55
RGB
9
56—63
PROGRAM01
SPEED
0—255
10
64—71
PROGRAM02
11
72—79
PROGRAM03
12
80—87
PROGRAM04
13
88—95
PROGRAM05
14
96—103
PROGRAM06
15
104—111
PROGRAM07

16
112—119
PROGRAM08
17
120—127
PROGRAM09
18
128--135
PROGRAM10
19
136—143
PROGRAM11
20
144—151
PROGRAM12
21
152—159
PROGRAM13
22
160—167
PROGRAM14
23
168—175
PROGRAM15
24
176—183
PROGRAM16
25
184—191
PROGRAM17
26
192—199
PROGRAM18
27
200--207
PROGRAM19
28
208—215
PROGRAM20
29
216—223
PROGRAM21
30
224—131
PROGRAM22
31
232—239
PROGRAM23
32
240—247
PROGRAM24
33
248—255
SOUND
Sensitivity
0—255
DMX mode 2: 03 CHs，
CH1
CH2
CH3
Red
Green
Blue
DMX mode 3: 05 CHs,
CH1
CH2
CH3
CH4
CH5
Red 0-255
Green 0-255
Blue 0-255
Dim 0-255
Flash 0-255
DMX mode 4: 12 CHs,
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
CH7
CH8
CH9
CH10
CH11
CH12
Red 3
Green 3
Blue 3
Red 4
Green 4
Blue 4
DMX mode 5: 24 CHs,
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
CH7
CH8
CH9
CH10
CH11
CH12
Red 3
Green 3
Blue 3
Red 4
Green 4
Blue 4
CH13
CH14
CH15
CH16
CH17
CH18
Red 5
Green 5
Blue 5
Red 6
Green 6
Blue 6
CH19
CH20
CH21
CH22
CH23
CH24
Red 7
Green 7
Blue 7
Red 8
Green 8
Blue 8

DMX mode 6: 48 CHs,
CH1
CH2
CH3
CH4
CH5
CH6
Red 1
Green 1
Blue 1
Red 2
Green 2
Blue 2
CH7
CH8
CH9
CH10
CH11
CH12
Red 3
Green 3
Blue 3
Red 4
Green 4
Blue 4
CH13
CH14
CH15
CH16
CH17
CH18
Red 5
Green 5
Blue 5
Red 6
Green 6
Blue 6
CH19
CH20
CH21
CH22
CH23
CH24
Red 7
Green 7
Blue 7
Red 8
Green 8
Blue 8
CH25
CH26
CH27
CH28
CH29
CH30
Red 9
Green 9
Blue 9
Red 10
Green 10
Blue 10
CH31
CH32
CH33
CH34
CH35
CH36
Red 11
Green 11
Blue 11
Red 12
Green 12
Blue 12
CH37
CH38
CH39
CH40
CH41
CH42
Red 13
Green 13
Blue 13
Red 14
Green 14
Blue 14
CH43
CH44
CH45
CH46
CH47
CH48
Red 15
Green 15
Blue 15
Red 16
Green 16
Blue 16
5. Master/slave Mode
Press the “MODE”, enter the master/slave operation mode “SLAVE MODE ================”.
6. Static Color
1) Press the “MODE”, enter to static color mode “STATIC COLOR R255 G255 B255 ”;
2) Press the “SETUP”, enter into red brightness settings menu “R255”;
3) Press the “UP”or “DOWN”, set the red brightness “R000 - R255”;
4) Press the “SETUP”, enter into green brightness settings menu “G255”;
5) Press the “UP”or “DOWN”, set the green brightness “G000 - G255”;
6) Press the “SETUP”, enter into blue brightness settings menu “B255”;
7) Press the “UP”or “DOWN”, set the red brightness “B000 - B255”;
NOTE: if no button operation in 20 seconds, the display panel will darkened (disable display）; in the state of
display panel darken, press any button, will show the current state, in the display state, can adjust the working
mode and operation state.
12CHs
1
2
3
4
24CHs
1
2
3
4
1
2
3
4
5
6
7
8
5
6
7
8
48CHs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16