IONA GLS189 User manual

SHABU SHABU ELECTRIC SKILLET
しゃぶしゃぶ電気スキレット
GLS189
instruction manual
Thank you for purchasing our products.
Please read these instructions before
use.
TYPHOON
Register Your
e-Warranty
and get 6 additional
months warranty
FREE
Simply register within 14 days at www.iona.com.sg/e-warranty
12 6
+
MONTHS FREE
GOLDLAND INTERNATIONAL PTE LTD
233 UBI AVENUE 4
INTREPID WAREHOUSE COMPLEX
SINGAPORE 408818
WEBSITE: www.iona.com.sg
EMAIL: [email protected]
TEL: [phone] - Ext 0
FAX: [phone]

1
Contents
Safety Precautions
Specification
Parts Identification
Features
Operating Instructions
Cleaning
Troubleshooting
1
2-3
3
4
5
5-6
6
7
Congratulations on your purchase of a new IONA product. IONA seeks to excel by
designing products with innovation, quality and safety of our customers in mind. Being
our valued customer, we hope to meet your expectations by delivering superior
service and product quality.
In addition, we ask that you exercise a degree of care when using any electrical
appliance and adhere to the following precautions stated in this manual.
FOREWORD
2
コンテンツ Contents Safety Precautions
Ordinary Prohibition Disassemble Prohibition Wet Hands Prohibition
Wet Water Prohibition Contact Prohibition Compulsory Prohibition
When operating the appliance, do not leave it unattended.
The appliance is not intended for use by young children or
inrm persons.
使用时，必须有
人监督。 电锅不
适合让小孩或体
弱者使用。
Please ensure that power supply cord is not damage
before connecting to power supply.
电源线如果损坏， 请不要使用。
Return appliance to it’s authorized agent for repair, as
special purpose tools are required.
如电线，插头或主机损坏，请送回维修中心。
Connect the plug to a 220-240V power supply that is
properly earthed.
必须使用有地线的插座，确保电流为220-240V的交
流电和插座电流不少于13A。
220-240V
Never immerse the product in water or place in a
dish washer.
不能用水冲洗本体。
The power plug must be installed in good contact on a
leakproof switch.
电源插头必须接触良好且安装防漏电开关。

34
Safety Precautions Parts Identication
Specification
仕様
GLS189
1300W
Do not touch plug with wet hands.
手湿时，不能接触用电器。
Do not tug or pull the power cord.
不要用力拉电源线，可能使电源线损坏。
Do not place appliance on an unstable surfaces. Place a
heatproof mat to prevent possible heat damages on
furniture.
请勿安放在不耐热的垫子上面或不稳定的场所使用。
When not in use, remove plug from mains.
长时间不使用时，请拔出插头。
Avoid touching hot surfaces.
使用期间或刚使用后请勿触碰锅体，锅盖等。
Do not operate the appliance in the presence of
inammable materials such as gas, curtain & etc.
不要接近易燃烧体如煤气炉， 窗帘等。
The stove should be placed horizontally and 10 cm to
wall or furniture and other electrical appliances. Do not
place near to gas stoves or burners.
不要靠近墙壁家具和
其他电器用品。
10
This product is only for household use. Do not use
outdoors or for commercial purposes.
此产品不能户外使用。
Do not use metal objects such as knives, forks, spoons or lids on the non stick pot, as they will damage the
non stick coating.
Do not boil dry, always check that there is enough liquid in the cooking pot before leaving. Do not leave
cooking unattended for a long time to prevent food and pot from getting burnt.
During the heating process with the highest power, the cooker may either stop or restart heating to maintain
the heat from time to time, this is normal.
Handle
Glass Cover
Cooking Pot
Heat Proof Plate
Heater
Heating Indicator
Temperature
selector
Heating Indicator

56
Features Cooking Instruction
製品の特徴
Multi purpose cooking pot. Ideal for boiling, frying, braising & stewing.
Large control panel design. Heat resistant plastic casing with modern elegant design.
Adjustable temperature from low to high.
High-power heating plate, double cooking pot for different preparations simultaneously.
Clear reinforce glass cover, easy monitoring of cooking progress.
Premium long lasting aluminium pot with non-stick coating, easy to clean.
Installing the cooking pot
調理鍋のインストール
1. Ensure that the heating element and the pot base is clean.
2. Pot should not be leaning or swaying after installation.
3. Do not power on without the pot in place.
Connecting to power supply
電源への接続
1. Set the temperture selector knob to “OFF” position.
2. Insert plug into power socket.
Note: Initial start-up operation may result in
minimal smell and smoke (about 15 minutes).
This is normal and is harmless.
Temperture selector
Operating Instruction
Place cooker on a stable and flat surface. Use if heatproof mat if heat may cause problems on
furniture.
Ensure that food is ready prepared and ready for cooking before powering on.
Place food and soup into the pot.
Adjust the temperature selector to your desired temperature. The heating idicator will light up.
When the desired temperature is acheived, the heating indicator will fade indicating that
heating has stopped. The heating indicator will light up again if the temperature falls below the
preset temperature.
To boil water, first set the temperature selector to “MAX” and lower the temperature after water
has boiled.
Power off after every use.
1.
2.
3.
4.
5.
6.
7.
調理の説明
Pour in water or soup base and position temperature selector to “HIGH”. The heating indicator will
light up. Cover lid. Add in ingredients when water is boiling.
Adjust temperature selector according to cooking needs. You should lower the temperature when
boiling has overflow.
During cooking, the heating light will light and fade, this is normal as the cooking is maintaining the
preset temperature.
1.
2.
3.
After Cooking
調理後
Set temperator selector to “OFF” position.
Remove the plug from the power socket.
1.
2.
Cleaning
クリーニング
After removing the plug from the power socket. Allow unit to cool.
Use a damp cloth to clean the body and remove any residues and oil.
Do not place body into water or rinse.
Cover and pot can be cleaned in water. Ensure that pot and cover is thoroughly dry before placing
back onto cooker.

7
Troubleshooting
トラブルシューティング
If the above cannot solve your problems or symptoms are not mentioned, please send your equipment
back to the authorized service agent for services and repairs.
No. Fault Causes Solution
Heating indicator is
not lit and heating
element is not hot.
Heating Indicator is
not lit but heating
element is hot.
Power supply is not connected
Check the temperature selector knob if it is
turned on, if the power plug is properly
inserted or if the power cord or plug
damaged.
Heating indicator led is damaged Send the unit back to its authorized service
agent for repairs.
Heating Indicator is
lit but heating
element is not hot.
Heating plate may be damaged Send the unit back to its authorized service
agent for repairs.
Boiling takes a long
time
1. Heating plate may be deformed
2. Only cooking on one side with the other
empty
3. Foreign objects between the pot and
heating plate
4. Cooking pot may be deformed
5. Glass cover is not covered
1. Send back to authorized service agent
for repairs
2. Cook on both sides
3. Remove foreign object
4. Purchase a replacement pot
5. Cover the glass cover
Unable to keep warm Thermostat may be damaged Send the unit back to its authorized service
agent for repairs.
Boiling spills
1. Too much food or water in the pot
2. Cover is not removed when boiling
1. Remove some food and soup
2. Remove cover when boiling
Electric leakage or
power trips
Liquids may have entered the main body
or temperature selector
Unplug and clean the body with a dry
cloth. Replace fuse plug if necessary
Separate collection. This product must not be disposed of with normal household waste.