IonGear 5637 User manual

OPERATING INSTRUCTIONS
Keeping you comfortable at work, rest or play ...
IonGear™
Battery Powered Heating Gloves
Product #5637

Page 1 of 6
Contents
- (1 Pair) IonGear™ Battery Powered Heating Gloves
Sizes: S/M or L/XL
- (1 Pair) Li-Ion Batteries with Integrated Temperature Controller
- (1) Battery Charger
Getting Started
1) Charging the Battery
Connect the IonGear™ glove batteries to the AC/DC charger
and plug the charger into any standard electrical outlet. The
batteries must continuously charge for approximately four hours
during its initial charge period. The LED light on the charger will
indicate green when each battery is fully charged. PLEASE
NOTE THAT IT IS OK TO CHARGE BOTH BATTERIES AT
THE SAME TIME. THE CHARGER HAS SEPARATE
INDICATOR LIGHTS FOR EACH BATTERY.

Page 2 of 6
IonGear™ Glove Battery Specifications
Type Li-Ion
Voltage 7.4V
Capacity 2200mAh
Weight 4.0 oz (119 gm)
Dimensions 2.75” x 1.75” x .75” (7 x 4.7 x 2 cm)
Battery Life 500 charge cycles
Approvals CE, TUV, UL, CCC
Country of Origin China
2) Connecting the System
Once fully charged, insert the battery/controller into the
reinforced battery pocket on the back of the glove gauntlet.
Orient the battery so that the black controller plate is visible
through the plastic window. The “POWER” button can appear
at the top or bottom of the plastic window depending on your
preferred orientation. Reach into the pocket and insert the
connector into the battery. (It may be easier to pull the connector
wire out and insert it into the battery BEFORE inserting it into the
pocket.) After inserting the connector into the battery, press
the “POWER” button for 2 seconds to turn on the glove.
3) Using the IonGear™ Battery Powered Heating Gloves
Please note that the battery will not turn on unless the connector
has been fully inserted into the battery. After connecting the
glove to the battery/controller, push the “POWER” button for
2 seconds to turn on the system. Users can adjust the internal
glove temperature settings by pressing the “POWER” button.
The temperature settings will cycle downward as follows:
100% → 75% → 50% → 25% → OFF → 100%

Page 3 of 6
IonGear™ Glove Temperatures & Battery Duration
SETTING Temperature Approx Duration - Full Charge
100% 135°F/57°C 3 hours
75% 120°F/49°C 4 hours
50% 105°F/41°C 6 hours
25% 90°F/32°C 10 hours
To turn the battery/controller off, press the “POWER” button
using the cycle outlined on Page 2 or disconnect the glove from
the battery.
4) Re-charging the Battery
Remove the battery from the glove, connect it to the AC/DC
charger and plug the charger into any standard electrical outlet.
Charging is complete once the LED on the charger indicates
green. PLEASE NOTE THAT USERS CAN CHECK BATTERY
POWER STATUS AT ANY TIME BY DISCONNECTING THE
BATTERY FROM THE GLOVE AND HOLDING DOWN THE
POWER BUTTON AND OBSERVING THE LED’s:
25% Battery Life Remaining
50% Battery Life Remaining
75% Battery Life Remaining
100% Battery Life Remaining

Page 4 of 6
Product Warranty
1 Year
Washing
To wash this product, first remove the battery/controller unit.
The gloves can be hand washed and hung to dry. Users must
ensure that the gloves are 100% dry before reconnecting the
battery. To clean the Battery/Controller unit, wipe with a dry cloth.
Battery Storage
Store the battery/controller in a cool, dry area. Avoid extended
exposure to direct sunlight. Re-charge after long periods of
non-use.
Precautions
Read and follow all “Operating Instructions” prior to using this
product. Stop using this product immediately if it becomes
damaged or is found to be defective. Do not attempt to
disassemble the Battery/Controller Unit or the Heating Glove.
If the Battery/Control Unit is broken, cracked or ruptured, avoid
contact with skin and discard immediately. Discontinue use
immediately if the Battery Powered Heating Gloves become
uncomfortably hot. Keep out of reach of children. If the Battery
Powered Heating Glove is torn, ripped or otherwise damaged,
contact the manufacturer to discuss repairs and/or future safety
issues. Contact us if you have any questions on the safe use of
this product.

Page 5 of 6
Contact Us
Please contact us if you have any questions on the proper
use of these products.
Thank you for purchasing our climate control apparel. We
appreciate your business and if you have any questions,
comments or suggestions, please do not hesitate to contact us.
Vista, California, USA
www.techniche-intl.com
1-888-823-2665
+ 1-760-476-0654
[email protected]

Page 6 of 6
Other IonGear™ Products
Battery Powered
Heating Vests & Jackets
Battery Powered
Wireless
Heating Insoles

Keeping you comfortable at work, rest or play ...
Vista, California, USA
www.techniche-intl.com
1-888-823-2665
+ 1-760-476-0654
[email protected]
CONNECT WITH US
TechNiche.International
facebook.com/TechNicheInternational
twitter.com/technicheintl
youtube.com/technicheintl