IOT Eport Pro-EP20 User manual
Eport Pro-EP20/EP20-PIN Super Port User Manual
http://www.iotworkshop.com - 1 -
Eport Pro-EP20/EP20-PIN
Super Port User Manual
V 1.3
Overview of Characteristic
MIPS MCU with 16MB Flash and 32MB SRAM
Use Linux Operation System
Support TCP/IP/Telnet/Modbus TCP Protocol
Support Serial To 10/100M Ethernet Conversion, Serial Speed Upto 460800 bps
Support 10/100M Ethernet Auto-Negotiation
Support Easy Configuration Through a Web Interface
Support Security Protocol Such As TLS/AES/DES3
Support Web OTA Wirelss Upgrade
Single +3.3V Power Supply
Size: 50 x 23 x 11 mm (L x W x H)
FCC/CE/RoHS Certificated
Eport Pro-EP20/EP20-PIN Super Port User Manual
http://www.iotworkshop.com - 2 -
TABLE OF CONTENTS TABLE OF CONTENTS
TABLE OF CONTENTS TABLE OF CONTENTS...........................................................................2
LIST OF FIGURES............................................................................................................................3
LIST OF TABLES .............................................................................................................................4
HISTORY...........................................................................................................................................4
1. PRODUCT OVERVIEW........................................................................................................5
1.1. General Description.........................................................................................................5
1.2. Device Paremeters...........................................................................................................5
1.3. Key Application................................................................................................................6
2. HARDWARE INTRODUCTION...........................................................................................7
2.1. Appearance ......................................................................................................................7
2.2. Pins Definition..................................................................................................................8
2.3. Eport Pro-EP20-PIN Pins Definition...............................................................................9
2.4. Electrical Characteristics..............................................................................................10
2.5. Ethernet Interface ..........................................................................................................10
2.6. Ethernet LED Interface ..................................................................................................11
2.7. Eport Pro-EP20 Mechanical Size..................................................................................11
2.8. Eport Pro-EP20-PIN Mechanical Size...........................................................................11
2.9. Evaluation Kits...............................................................................................................13
2.10. Order Information ..........................................................................................................14
2.11. Typical Application........................................................................................................14
2.12. Software Function..........................................................................................................15
APPENDIX A: HW REFERENCE DESIGN...............................................................................16
APPENDIX B: CONTACT INFORMATION...............................................................................17
Eport Pro-EP20/EP20-PIN Super Port User Manual
http://www.iotworkshop.com - 3 -
LIST OF FIGURES
Figure 1. Eport Pro-EP20 Appearance ...........................................................................................................7
Figure 2. Eport Pro-EP20-PIN Appearance....................................................................................................7
Figure 3. Eport Pro-EP20 Series Pins Map.....................................................................................................8
Figure 4. Eport Pro-EP20-PIN Pins Map.........................................................................................................9
Figure 5. Eport Pro-EP20 Series Mechanical Dimension..............................................................................11
Figure 6. Eport Pro-EP20-PIN Mechanical Dimension..................................................................................12
Figure 7. Eport Pro-EP20-PIN recommended PCB layout............................................................................12
Figure 8. Eport Pro-EP20 Series EVK ..........................................................................................................13
Figure 9. Eport Pro-EP20 Series Product Number Defination ......................................................................14
Figure 10. Eport Pro-EP20 Series Hardware Typical Application ...................................................................14
Figure 11. HW REFERENCE DESIGN...........................................................................................................16
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 4 -
LIST OF TABLES
Table1. Eport Pro-EP20 Series Module Technical Specifications.......................................................................5
Table2. Eport Pro-EP20 Series Pins Definition ...................................................................................................8
Table3. Eport Pro-EP20-PIN Pins Definition .......................................................................................................9
Table4. Absolute Maximum Ratings:.................................................................................................................10
Table5. Power Supply & Power Consumption:..................................................................................................10
Table6. Ethernet Interface Definition.................................................................................................................10
Table7. LED Interface Definition........................................................................................................................11
Table8. Eport Pro-EP20 Series EVK Interface..................................................................................................13
HISTORY
Ed. V1.0 10-24-2016 First Version
Ed. V1.1 03-03-2017 Add auto-ip, heartbeat,ntp,UART fast config function(Firmware 1.07c
Version)
Ed. V1.2 04-23-2018 Add EP20-PIN type.
Ed. V1.3 04-16-2019 Update software function to another document.
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 5 -
1.PRODUCT OVERVIEW
1.1. General Description
The Eport Pro-EP20 Series is a fully self-contained small form-factor, most compact, integrated
solution, which provide a serial interface to Ethernet connectivity to web enable any device. The Eport
Pro-EP20 Series Series integrate TCP/IP controller, memory, 10/100M Ethernet transceiver, high-
speed serial port within a compact RJ45 package and integrates a fully developed TCP/IP network
stack and Linux OS.The Eport Pro-EP20 Series Series also includes an embedded web server used
to remotely configure, monitor, or troubleshoot the attached device.
The Eport Pro-EP20 Series Series using highly integrated hardware and software platform,It has been
optimized for all kinds of applications in the industrial control, smart grid , personal medical application
and remote control that have lower data rates, and transmit or receive data on an infrequent basis. By
simply adding an Eport Pro-EP20 Series Series unit to a product Design, device manufacturers can
reduce their Design cycle and speed up Time-To-Market with very low risk.
The Eport Pro-EP20 Series integrates all serial to Ethernet functionality into a low-profile, 50 x 23 x
11mm standard RJ45 module package that can be easily mounted on main PCB with application
specific circuits and even not change your original Design.
Eport Pro-EP20-PIN is Eport Pro-EP20 with PIN transformation board. The function is the same.
1.2. Device Paremeters
Table1. Eport Pro-EP20 Series Module Technical Specifications
Item
Parameters
System Information
Processor/Frequency
MIPS/320MHz
Flash/SDRAM
16MB/32MB
Operating System
Linux
Ethernet Port
Port Number
1 RJ45 with LED
Interface Standard
10/100 Base-T Auto-Negotiation
Protection
2KV Isolation
Transformer
Integrated
Network Protocol
IP，TCP，UDP，DHCP，DNS，HTTP Server/Client，ARP,
BOOTP, AutoIP, ICMP，Web socket, Telnet, FTP,TFTP,
uPNP, NTP, SNMP,Modbus TCP
Security Protocol
SSL v3
AES 128Bit
DES3
IPV6 Support
Support(SDK)
Serial Port
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 6 -
Port Number
1 + 1 debug
Interface Standard
3.3V TTL: 2 wire（TX,RX）
Data Bits
8
Stop Bit
1,2
Check Bit
None,Even,Odd,Space,Mark
Baud Rate
TTL: 600 bps~460800 bps
Flow Control
No Flow control
Hardware RTS/CTS、DSR/DTR
Software Xon/ Xoff flow control
Software
Web Pages
Http Web Configuration
Customization of HTTP Web Pages
Log
Remote Realtime Log,
Configuration
Web
CLI
XML import
Telnet
IOTService PC Software
UART Fast Config
Firmware Upgrade
Web, IOTService
SDK For Dev.
Support
Basic Parameter
Size
50 x 23 x 11 mm
Operating Temp.
-25 ~ 70°C
Storage Temp.
-45 ~ 105°C, 5 ~ 95% RH（no condensation）
Input Voltage
3.3V
Working Current
~200mA
Power
<700mW
1.3. Key Application
The Eport Pro-EP20 Series device connects serial device to Ethernet networks using the TCP/IP
protocol:
⚫Remote equipment monitoring
⚫Asset tracking and telemetry
⚫Security Application
⚫Industrial sensors and controls
⚫Medical devices
⚫ATM machines
⚫Data collection devices
⚫Universal Power Supply (UPS) management units
⚫Telecommunications equipment
⚫Data display devices
⚫Handheld instruments
⚫Modems
⚫Time/attendance clocks and terminals
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 7 -
2.HARDWARE INTRODUCTION
The Eport Pro-EP20 Series unit is a complete solution for serial port device connecting to network.
Packageed into a RJ45 connector, this powerful device supports a 10/100BASE-T Ethernet
connection, a reliable and proven operating system stored in flash memory, an embedded web server,
a full TCP/IP protocol stack,and standards-based (AES) encryption.
Through Ethernet cable connect router with Eport Pro–EP20 serial server for data transfer, which
makes the electromechanical integration very simple. Eport Pro-EP20 Series meet EMC Class B
security level,It can pass every countries relevant certification test
2.1. Appearance
Figure 1. Eport Pro-EP20 Appearance
Figure 2. Eport Pro-EP20-PIN Appearance
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 8 -
2.2. Pins Definition
Figure 3. Eport Pro-EP20 Series Pins Map
Table2. Eport Pro-EP20 Series Pins Definition
Pin
DES3cribtion
Net Name
Signal Type
Comments
1
GPIO
GPIO1
I/O
Can be configured to UART1:TXD2
2
GPIO
GPIO2
I/O
Can be configured to UART1:RXD2
3
UART0
CTS
O
Can be configured to GPIO
4
External Reset In
nRST
I, PU
“Low” effective reset input.
5
UART0
RTS
I
Can be configured as RS485 control
pin
6
Multi-Function Pin
nReload
I,PU
Detailed functions see <Notes>
7
LED indicator
LED2_Data
O
Detailed functions see <Notes>
8
UART0
RXD
I
3.3V, TTL.
9
UART0
TXD
O
3.3V, TTL.
10
Ground
GND
GND
Power Ground
11
+3.3V Power
DVDD
Power
+3.3V
12
LED indicator
LED1_Link
O
Detailed functions see <Notes>
EGND
EGND
EGND
EGND
Earth GND, Used to shield EMC signal.
Connect to Ethernet Metal Shell
Internally.
It is not allowed to connect to GND.
<Notes>
nReload Pin function:
1. Put this pin low before the device powered on (or Reset), This device works in mass
production mode to upgrade its firmware, this mode is used for upgrade customized
firmware. The corresponding PC tools can be download on High Flying website.
2. After device is powered up, If put this pin to low more than 3 seconds and then put to High,
It will restore the product parameters to factory setting.
We strongly suggest user to fan out this pin.
LED2_Data Pin
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 9 -
1. When there are data transmiting and receiving, This LED will flashing. If there is no data
transmit and receive, It will output High.
LED1_Link Pin
1. When Ethernet connected normal, It will output Low, If there is no Ethernet connection, It
will output High.
2.3. Eport Pro-EP20-PIN Pins Definition
Figure 4. Eport Pro-EP20-PIN Pins Map
Table3. Eport Pro-EP20-PIN Pins Definition
Pin
Describtion
Net Name
Signal Type
Comments
1
Ground
GND
GND
Power Ground
2
Ground
GND
GND
Power Ground
3
External Reset In
nRST
I, PU
“Low” effective reset input.
4
UART0
TXD
O
3.3V, TTL.
5
UART0
RXD
I
3.3V, TTL.
6
UART0
RTS
I
Can be configured as RS485 control
pin
7
Multi-Function Pin
nReload
I,PU
Detailed functions see <Notes>
8
UART0
CTS
O
Can be configured to GPIO
EGND
EGND
EGND
EGND
Earth GND, Used to shield EMC signal.
Connect to Ethernet Metal Shell
Internally.
It is not allowed to connect to GND.
<Notes>
nReload Pin function: Same as above.
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 10 -
2.4. Electrical Characteristics
Table4. Absolute Maximum Ratings:
Parameter
Condition
Min.
Typ.
Max.
Unit
Storage Temperature Range
-45
125
°C
Maximum Soldering Temperature
IPC/JEDEC J-STD-020
260
°C
Supply Voltage
0
3.8
V
Voltage on any I/O pin
0
3.3
V
ESD (Human Body Model HBM)
TAMB=25°C
2
KV
ESD (Charged Device Model, CDM)
TAMB=25°C
1
KV
Table5. Power Supply & Power Consumption:
Parameter
Condition
Min.
Typ.
Max.
Unit
Operating Supply Voltage
3.1
3.3
3.6
V
Operating Temperature Range
-25
70
°C
Supply Current (10BASE-T activity)@ 96MHz
Without date
transmit and
receive
150
mA
Supply Current (100BASE-T activity)@ 96MHz
5KB/S data
200
mA
Input Leakage Current
Ii
-10
10
uA
Output high voltage
@IOH=2mA
2.8
V
Output Low Voltage
@IOL=2mA
0.3
V
Input High Voltage
1.6
3.6
V
Input Low Voltage
-0.3
1.4
V
GPIO Input pull-up resistor
200
kΩ
GPIO Input pull-down resistor
200
kΩ
2.5. Ethernet Interface
The 10/100 Ethernet magnetics, network status LEDs, and RJ45 connector are all integrated into the
Eport Pro-EP20 Series unit.
Table6. Ethernet Interface Definition
Pin
DES3cribtion
Net Name
Signal Type
1
Transmit Data +
TX+
O
2
Transmit Data -
TX-
O
3
Receive Data +
RX+
I
4
NC
5
NC
6
Receive Data -
RX-
I
7
NC
8
NC
9
Case Ground
SHIELD
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 11 -
2.6. Ethernet LED Interface
The device contains two bi-color Ethernet LED indicator (Detailed postion is in dimension drawing .)
Table7. LED Interface Definition
Link LED (Left Side)
Activity LED (Right Side)
Color
Meaning
Color
Meaning
Off
No Connection
Off
No Data
Yellow
10/100Mbps
Green
Have Data
2.7. Eport Pro-EP20 Mechanical Size
The dimensions of Eport Pro-EP20 Series are defined as following picture (mm):
Figure 5. Eport Pro-EP20 Series Mechanical Dimension
2.8. Eport Pro-EP20-PIN Mechanical Size
The dimensions of Eport Pro-EP20-PIN are defined as following picture (mm):
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 12 -
Figure 6. Eport Pro-EP20-PIN Mechanical Dimension
Figure 7. Eport Pro-EP20-PIN recommended PCB layout
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 13 -
2.9. Evaluation Kits
We provide evaluation kit for user to learn to use Eport Pro-EP20 Series. Evaluation kit picture is as
following, User can use RS232, USB Serial or Ethernet interface to configure parameters, manage
equipment and do some function test. ( onboard FT232R chip switch, its driver can be download from
high flying website, When using USB Serial, the top right corner jumper need to all jump to the left
side). .
Figure 8. Eport Pro-EP20 Series EVK
Evaluation kit interface details as following:
Table8. Eport Pro-EP20 Series EVK Interface
Function
Name
Describe
External
Interface
COM
Main data/command RS-232 interface
USB_UART
UART to USB debug interface（Used for PC debug
envirement which without RS232 interface, Need load
drivers to use）, Can be power supply port
DC5
DC 5V input
EXT PORT
GPIO Pin interface
JMP
4Pin USB or RS232 jumper.
All jump to left choose USB Serial..
All jump to right choose RS232
LED
Power
3.3V Power Indicate
Link
Network indicator, Detailed functions see
LED1_Link Pin<Notes>
Data
Communication indicator, Detailed functions see
LED2_Data Pin<Notes>
Button
Reset
“Reset” Button
Reload
Press down the button more than 3s and then loose
to restore factory setting
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 14 -
2.10.Order Information
Base on customer detailed requirement, Eport Pro-EP20 Series provide different configuration version,
Details as below:
Figure 9. Eport Pro-EP20 Series Product Number Defination
2.11.Typical Application
Figure 10. Eport Pro-EP20 Series Hardware Typical Application
Notes:
nRST- Input.Hardware reset signal. Effective Low.
There is internal pull-up resistor to 3.3V and no external pull-up resistor needed. MCU put nRST signal
to low for at least 10ms if need to reset the device.
nReload- Input.Device restore to factory default configuration. Effective Low; （Recommend this pin
to connect button or jumper header, Used for batch upgrade and configuration）
Can connect with external button or chip pin, When press nReload button, pull the pin to Low level
more than 3s, then loose, device will restore to factory default setting and restart itself. If nReload
function is not required, Can leave this pin open, Don’t need any connection.
TXD/RXD- UART port data transmit and receive signal.
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 15 -
2.12.Software Function
Refer to “IOT_Device_Series_Software_Funtion”document for detailed usage.
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 16 -
APPENDIX A: HW REFERENCE DESIGN
Figure 11. HW REFERENCE DESIGN
Detailed Eport Pro Series Evaluation Board Design source files, pls access IOTworkshop or High-
Flying web download page or contact with High-Flying technical support people to acquire.
Eport Pro-EP20/EP20-PIN Serial Server User Manual
Shanghai High-Flying Electronics Technology Co., Ltd - 17 -
APPENDIX B: CONTACT INFORMATION
------------------------------------------------------------------------------------------------------------
Address: Room 1002,Building 1,No.3000,Longdong Avenue,Pudong New
Area,Shanghai,China,201203
Web: www.iotworkshop.com or www.hi-flying.com
Contact:
Sales: sales@iotworkshop.com
Support: support@iotworkshop.com
Service: service@iotworkshop.com
Business: business@iotworkshop.com
---------------------------------------------------------------------------- -------------------------------
For more information about IOTworkshop modules, applications, and solutions, please visit our web
site www.iotworkshop.com
<END OF DOCUMENT>
This manual suits for next models
1
Table of contents
