iOttie iON Wireless Stand User manual

Operation Manual
iON Wireless Stand
Fast Wireless Charger
iOttie

Getting Started
Follow the detailed instructions within this manual when
using the iON Wireless Stand.
--·
Please make sure your device is Qi Wireless
compatible. Compatible devices include iPhone X,
8 Plus, 8, Samsung Galaxy S9, S9+, Note 8, S8, S8+,
S7, S7 Edge, S6, S6 Edge, and any other Qi enabled
devices.
Not all smartphones can receive a wireless fast
charge, however they will receive a standard
wireless charge. Check your phone's charging
features for fast charge capabilities.
Please only use the included cable and power
adapter. Third party components may impact
wireless charging performance.
If using a third party charger, please only use a
Qualcomm Quick Charge 3.0 or equivalent adapter.
Plugging charging stand into a computer will not
provide adequate power to support wireless fast
charging. Please only plug directly into a Power
Adapter.
0 iOttie is notliable forpossible damages due to pr oduct mi suse.

At a Glance:
Front Ba ck
Sid e
Charging Indi cator
.
.
.
.
r
US B-C Port (input) .. ... ·· ··· ·····:
:··Anti-Slip Pad
.
t======~- .... -.1""1 •••
• _____ .._. .. ..., ..••••.•Anti-Slip Base
What's in the Box:
0 USB-C Charging Cable
8 Power Adapter
O Power adapt er t ype may va ry by co untry.
I
.
.
.
.
.
\
Inside : Two Qi Coils
E) iON Wireless Stand

Key Features
Qi Wireless Fast Charging
Charge smartphones faster than a standard wireless charger.
Max Wireless Charging Capacity: 7. 5W iPhone, 10W Android
Ideal Viewing
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
65 ° \.
.
.
...................
A 65 degree tilt provides an id eal position for viewing
cont ent while charging simultaneously.

Charging Convenience
Two Qi coils allow for charging in portrait or landscape mode.
Slip Resistant
Anti-Slip Pad keeps devices safe while charging and Anti-Slip
Base prevents shifting on smooth or textured furniture surfaces.

Preparation
0 Please onlyuse the included cable and power adapter.
Usingthird partycomponents may impact wireless charging
performance.
1. Plug Charging Cable into the USB-C port on the back of the
charging stand and connect USB-A side to Power Adapter.
2. Plug the Power Adapter into an AC outlet.
The Charging Indicator will turn on and then fade to inform
you the pad has received power.
0 Please do not plug Charging Stand into a computer, as
this will not provide adequate power to support wireless
fast charging.

Qi Alignment Guide
0 Use the guidebelow to receive an efficientwireless fast charge
Qi Coil Location
The Qi coil is generallyfound in the center of most smartphone
models. 0
IPhoneX Galaxy S9
Smartphone alignment
The charging stand has portrait and landscape charging modes:
Portrait Charging: Line up center
of smartphone vertically to
charging surface and rest device
on Anti-Slip Pad until a charging
connection is found.
Landscape Charging: Line up
center of smartphone horizontally
to charging surface and rest
device on Anti-Slip Pad until a
charging connection is found.
Portrait Landscape
0 Rest your smartphone on the charging surface parallel
to the Charging Stand

Troubleshooting
Your device's screen will show that it is charging.
If your phone is not charging, check the Charging Indicator on
the right side of the device.
0
: ···Fading White Light
•
•
•
•
•
•
•
•
•
•
•
•
•
•
When powered on, a white
lightwill appear briefly and
then fade.
· ···· ............ : ..•. solid White Light
White light will remain on
if the phone is charging
wirelessly.
····Blinking Red Light
A blinking red light
will appear if phone is
incompatible or Qi coil is
blocked.
Please contact customer service at [email protected] if you have
any questions.

Specifications
Charging Stand
ITEM
INPUT
OUTPUT
LENGTH
DESCRIPTION
5V=3A
9V=2A
5V=1A / 9V=1A
3.15"
WIDTH 2.77"
HEIGHT 4. 32"
WEIGHT 4.61oz
Power Adapter
INPUT
OUTPUT
110"'250V
3.6N6V=3A
600mA
6N9V=2A 9N12V=1.5A

Declaration of Conformity (FCC)
Changes or modifications not expressly approved by the party responsible
forcompliance could void the userts authority to operatetheequipment. You
can refer to the following completed FCC warnings.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the fotlowing two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential instatlation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interferencewill not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect theequipment into an outlet on a circuit differentfrom that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Operational Warnings
O During the charging process, the transfer of electricity gives off heat. Your
device may become warm, but should not become exceedingly hot.
9 If the device gets wet, please cease charging immediately. Remove all
plugs and dry the product completely. Device is only to be operated in a
dry, indoorenvironment.
o Please be careful of excessive drops, dents, punctures, or deformities on
the device. If you are concerned, please unplug the device and contact
the manufacturer.
0 Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
O Operating this device in a hot environment or in direct sunlight for a long
period of time may cause malfunctions. We recommend keeping the
product in coolertemperatures.
O Please use included components for an optimal experience. To support Qi
fast charge when using a third party charger or a USB Power Adapter use
a minimum output of both lf9.0V~2.0A or 12V~ 1.5/:t.
O If your phone is misaligned when wireless charging, your device may
become warm due to inefficient wireless output. It is important to always
properly align your smartphone.
9 California Proposition 65
This productcontains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm.
CAUTION
OLD ELECTRICAL APPLIANCES MUST NOT BE DfSPOSEO OF TOGETHER
WITH THE RESIDUAL WASTE, BUT HAVE TO BE DISPOSED OF SEPARATELY.

***** Love your iOttie product?
Let us know by leaving a review online, or
connect with us on our social platforms.
12r A~R! ~ Having issues?
Our Customer Service Team is waiting to
assist you! Please reach out to us at:
[email protected]
iOtt · ie
D CJ @l g
~ [email protected]
9 www.iottie.com