Ip.Access nanoLTE E40 User manual

nanoLTE E40 AP Product Description
NANO_GST_43310 101_0.5

Notices
This document is provided to you by or on behalf of ip.access Ltd ("ip.access").
© ip.access Limited 2016.
The documentation and any software described herein and/or provided to you in conjunction with this
documentation contain proprietary and confidential information of ip.access and may only be used
subject to a license agreement containing restrictions on use and disclosure. They are also protected
by copyright, patent rights and other intellectual and industrial property laws. The information contained
in this document and any software described herein is subject to change without notice. If you find any
problems in the documentation and/or the software please report them to us in writing. The document
and/or the software are not warranted to be error-free. No right, title, license or interest in any
physically or electronically distributed materials is transferred to you by such distribution. No part of this
document and/or the software may be reproduced, displayed, copied, translated, adapted,
downloaded, electronically transmitted, used or reproduced in any form including (without limitation)
distribution or storage in a system for retrieval without our express written permission (which may be
subject to conditions).
The documentation and/or software may provide links to Web sites and access to content, products,
and services from third parties. ip.access is not responsible for the availability of, or any content
provided on, third-party Web sites. You bear all risks associated with the use of such content. If you
choose to purchase any products or services from a third party, the relationship is directly between you
and the third party. ip.access is not responsible for: (a) the quality of third-party products or services; or
(b) fulfilling any of the terms of the agreement with the third party, including delivery of products or
services and warranty obligations related to purchased products or services. ip.access is not
responsible for any loss or damage of any sort that you may incur from dealing with any third party.
ip.access is the owner of the "ip.access" trademark and all associated trade names, logos and devices
unless indicated to the contrary. Any other trademarks, logos and names appearing in this document
may be the property of their respective owners.
ip.access Limited is a Private Limited Company Registered in England and Wales
Company No. 03400157
Registered Office:
Building 2020
Cambourne Business Park
Cambourne
CB23 6DW
UK
Tel: [phone]
Fax: [phone]
Further company information may be found at www.ipaccess.com.

Revision History
Version Change Summary Date Author
101_0.1 Updated for N4G_1.1 15 Dec 2015 AM4
101_0.2 Update details for E40 US band support 18 Jan 2016 AM4
101_0.3 Cosmetic adjustments 31 Mar 2016 AM4
101_0.4 Update references to other manuals 22 Jun 2016 AM4
101_0.5 Add hardware capability equivalence statement for 248 and 278 19 Jul 2016 AM4

nanoLTE E40 AP Product Description
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page i
Table of Contents
1 Introduction............................................................................................ 1
1.1 Related Information............................................................................................ 1
1.2 Terminology ....................................................................................................... 1
2 Key Features .......................................................................................... 2
3 Product Details ...................................................................................... 4
3.1 RF Capabilities................................................................................................... 4
3.2 Throughput Performance ................................................................................... 4
3.3 Operational Range............................................................................................. 4
3.3.1 Long Range Extension (LRE)............................................................................... 4
3.4 OA&M ................................................................................................................ 5
3.5 Electrical and Mechanical .................................................................................. 5
3.5.1 Power ................................................................................................................... 5
3.5.2 Mechanical Design and Form Factor ................................................................... 5
3.5.3 Physical Interfaces ............................................................................................... 6
3.5.4 Antennas .............................................................................................................. 6
3.5.5 Network Interfaces ............................................................................................... 7
3.5.6 Reset Button Description...................................................................................... 7
3.5.7 Visual Indicators ................................................................................................... 7
3.5.8 Environmental Conditions .................................................................................... 7
3.6 Accessories........................................................................................................ 8
3.7 Hardware Installation Options............................................................................ 8
3.8 Network Architecture.......................................................................................... 8
3.9 NOS OA&M Support for LTE APs...................................................................... 9
4 Compliance to Standards ................................................................... 10
4.1 Electromagnetic Compatibility (EMC) .............................................................. 10
4.2 Storage ............................................................................................................ 10
4.3 Transportation.................................................................................................. 11
4.4 Safety............................................................................................................... 11
4.5 Hardware Equivalence for 248 and 278 Product Variants ............................... 11

nanoLTE E40 AP Product Description Introduction
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 1
1 Introduction
The nanoLTE E40 AP (E40) is a single mode LTE only Access Point, built on advanced
DSP technology. Supporting 2x2 MIMO with an output power of +21dBm per port (at the
antenna connector), the E40 provides comprehensive LTE operation for Enterprise
deployments.
This product is designed to provide coverage and capacity enhancement for indoor
deployments.
1.1 Related Information
1.2 Terminology
For common ip.access system terminology, see [REF_11105].
For additional terms defined by 3GPP, see [21.905].
[REF_11105] nanoLTE System Glossary (NANO_REF_11105)
[21.905] Vocabulary for 3GPP Specifications (3GPP TR 21.905)
[36.104] E-UTRA Base Station (BS) radio transmission and reception (3GPP TS 36.104)
[36.300] E-UTRA and E-UTRAN Overall Description (3GPP TS 36.300)

nanoLTE E40 AP Product Description Key Features
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 2
2 Key Features
The key features of the nanoLTE E40 AP are:
Feature Details
3GPP Compliance Compliant to [36.104].
Number of RF Carriers Single Carrier.
Bandwidth The nanoLTE AP supports the following bandwidths:
•5MHz
•10MHz
•15MHz
•20MHz
MIMO 2x2 MIMO-Single User Downlink only.
RF Average Output Power 2 x +21dBm (2 x 125mW).
Max Data Rate Throughput In N4G_1.1, the supported maximum data rates are 75Mbps
DL and 25Mbps UL over the air.
The maximum throughput achievable also depends on the
bandwidth configured and local radio conditions.
The nanoLTE E40 AP is software upgradeable to 100Mbps
DL and 37.5Mbps UL.
Simultaneous # Active Users Up to 16 RRC Connected Users.
Network Interfaces S1 over IP, X2 Interface is planned as a Software update.
Electrical Supply 12V @ 1.7A from external power supply.
Modes supported FDD-LTE.
3GPP Frequency Bands (for LTE
operation, or for LTE or WCDMA
Network Listen)
EU 248J and 278J variants:
• Band 1 (2100 MHz)
• Band 3 (1800 MHz)
• Band 7 (2600 MHz)
• Band 20 (800 MHz)
EU 248L and 278L variants:
• Band 3 (1800 MHz)
• Band 7 (2600 MHz)
• Band 8 (900 MHz)
• Band 20 (800 MHz)
US 248M and 278M variants:
• Band 2 (1900 MHz)
• Band 4 (2100 MHz)
• Band 13 (750 MHz)
• Band 17 (740 MHz)
Operation Single band operation, configured via OA&M.

nanoLTE E40 AP Product Description Key Features
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 3
Note: The specified data rates are for a single user and relate to air interface performance
assuming an ideal radio channel. The data rates achieved at the application layer may vary
subject to radio conditions, available backhaul bandwidth and number of simultaneous
active users.
Receive diversity Yes.
Receive sensitivity Meets the requirements in [36.104].
Oscillator High stability OCXO. Absolute frequency stability +/- 100ppb
per annum under normal operating conditions.
Feature Details

nanoLTE E40 AP Product Description Product Details
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 4
3 Product Details
3.1 RF Capabilities
The E40 is Quad Band for both EU and US. See section 2 for band support.
3.2 Throughput Performance
The E40 platform is capable of high speed data transfer to LTE capable devices.
The platform is software upgradeable to support the following enhancements:
• Up to 16 simultaneous RRC Connected LTE users
• Up to 75Mbps peak downlink data (software upgradeable to 100Mbps)
• Up to 25Mbps peak uplink data (software upgradeable to 37.5Mbps)
• GBR/non-GBR bearer support
Note: The specified data rates are for a single user and relate to air interface performance
assuming an ideal radio channel. The data rates achieved at the application layer may vary
subject to radio conditions, available backhaul bandwidth and number of simultaneous
active users.
3.3 Operational Range
With the standard antennae, the nanoLTE E40 AP has an approximate maximum range of
700m with 0dB path loss.
3.3.1 Long Range Extension (LRE)
The LRE feature provides the option to increase the range of the nanoLTE AP by
connecting the AP to an external PA. The maximum range is approximately 4km. This is
configuration dependent.

nanoLTE E40 AP Product Description Product Details
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 5
3.4 OA&M
The E40 supports a management interface which allows direct configuration via the
Network Orchestration System (NOS). This is the same NOS as the 3G one that can be
updated to support nanoLTE Access Points.
3.5 Electrical and Mechanical
3.5.1 Power
Maximum power consumption is approximately 20W. The E40 requires an external power
supply with a rating of 12V DC.
All electrical inputs are protected against over voltage and reverse polarity connections.
3.5.2 Mechanical Design and Form Factor
Dimensions - W x H x D 202mm x 46mm x 268mm
Weight - E40 unit only Approximately 1.2Kg

nanoLTE E40 AP Product Description Product Details
NANO_GST_43310 v101_0.5 for N4G_1.1 © ip.access Limited 2016 Page 6
3.5.3 Physical Interfaces
The following physical interfaces are presented on the enclosure panel:
• DC power jack
• RJ45 Ethernet (LAN)
• 2 x SMA female RF
• Reset Switch
• GPS Antenna Port (inactive)
3.5.4 Antennas
When used in SISO mode, it is possible to have one antenna for the Tx path and one
antenna for the Rx path. The nanoLTE E40 AP has 2 antenna elements housed internally
within its external plastic enclosure. These are directly connected to the main PCB
assembly by means of SMA connectors. The connectors present duplex transmit and
receive RF signals for each port.
External antennas, for example panel antennas, can be connected instead of the supplied
components. This can be achieved by removing the antenna cover, which allows direct
access to the SMA connectors for cabling.