IP VOICE IPV62 User manual

IP
VOICE
Volume Up
Mute Status
Audio Status
Mute
User Guide
IPV62
Call Control
Volume Down

Voice Assistant

User Guide
IPV62
How to connect the Headset
Connect to PC via USB Cable:
• Connect one end of the USB cable to the PC port of the base.
• Connect the remaining end of the USB cable to the USB port
of the PC.
• Important: You need to connect the PC to the micro USB port
of the base marked with the text "PC".
Connect to Desk Phone via USB Cable:
• Connect one end of the USB cable to the USB port of the base.
• Connect the remaining end of the USB cable to the USB port
of the desk phone.
• Answer a Call: Press the Call Control 
the headset.
•End a Call: Press the Call Control 
• Reject a Call: Double-press the Call Control
• Hold a Call: Hold the Call Control
•Resume Held Call: Hold the Call Control 
seconds.
•Adjust the Volume: press the Volume Up/Volume Down

•Mute/Unmute: Press the Mute
NOTE: You can also Mute/Unmute the microphone, by
raising and lowering the microphone boom.
An audible announcement is heard to indicate “Muted” or
“Unmuted” status.

Call Handling from the headset
• Answer a IPVoice Desktop App call: Press the PC 
• Answer/end a desk phone's call: Press the Phone
• Reject a IPVoice Desktop App call: Double-press the PC

• Reject a desk phone's call: Double-press the Phone
• Redial a IPVoice Desktop App call: Double-press the PC

• Redial a desk phone's call: Double-press the Phone
Call Handling from the Base
Before you begin:


call on the base.
Procedure:
1. Hold the PC Phone
Two calls are merged.
2. To split the conference, hold the PCPhone
2 seconds.


End or Leave a Conference Call
To end the call for all headsets, press the Call Control
the primary headset, or dock the primary headset in the base.
Merge Two Calls into one Conference Call
IP
VOICE
Before you begin:
• 
•A call is answered on the desk phone using the handset or
speaker phone.
Procedure:
•
•
It may be necessary to press the headset key on the desk
phone. The audio will transfer from the desk phone to the
headset.
Transfer a call from desk phone to headset
Before you begin:
• 
•A call is answered on the headset.
Procedure:
Do one of the following on the desk phone:
• Pick up the handset.
• Press the speaker key.
The audio will transfer from the headset to the desk phone.
Transfer a call from the headset to the
desk phone