
5 74.098.DK11
electronic functions - washbasin faucet with touch-function
signs and symbols
- touch function - hand/object within sensor area
- water ows - LED ashes GREEN
- water ow stops - LED ashes RED
h - hours / min. - minutes / sec. - seconds
function procedure feedback
signal information default
setting
range
via iqua-
Touch
rst startup
after installation -. -
1x app. 1-4 sec. till
after releasing + 2x/sec., keep out of sensor area
wait till 1x con rmation, ready for operation
temporary off
«cleaning mode»
activate
1x app. 2 sec. till 1x extended function mode is active
2 min. -
2x a app. 0,5 sec. pulsing during active function
temporary off
stop
1x app. 0,5 sec. 1x manual stop
or automatic 1x automatic after preset time
continous run
activate
1x app. 2 sec. till 1x extended function mode is active
2 min.
0,5-20 min.
(in 0,5 min.
steps)
1x minimum 3 sec.
(max. 5 sec.) water ows after releasing
continous run
stop
1x app. 0,5 sec. manual stop
or automatic automatic after preset time
follow up
time control
for normal operation
set / programm
1x app. 2 sec. till 1x extended function mode is active
1 sec. 0-10
sec.
1x app. 5 sec. till 1x
1x 0 - 10 sec.
keep touched + 1x/sec., water ows during touching -
releasing de nes duration
after releasing 1x con rmation, ready for operation
time of water ow
for continous on
and
purge duration for
line purge feature
set / programm
1x app. 2 sec. till 1x extended function mode is active
2 min.
0,5-20
min.
(in 0,5 min.
steps)
1x minimum 3 sec.
(max. 5 sec.) + touch max. 5 sec., water ows after releasing,
number of (1x-40x) shows current setting
1x keep touched till 1x - 40x 1x =0,5 min. .... 40x = 20,0 min.
releasing de nes duration
after releasing + 1x check / con rmation of setting by repeating
number of (1x - 40x) according to setting
line purge feature
activate / deactivate
«automatic ush on
set intervall»
1x app. 2 sec. till 1x extended function mode is active
off
off
12 h
24 h
48 h
1x app. 25 sec. till 1x - 4x
1x= off, 2x=12h, 3x= 24h, 4x= 48h,
ignore ashes after 5 sec. and 10 sec. - keep
touched till 1x - 4x aftter app. 25 sec.,
releasing de nes interval
wait till 1x con rmation, ready for operation
restart electronics
1x app. 2 sec. till 1x extended function mode is active
- -
2x a app. 0,5 sec. pulsing during active function
1x app. 5 sec. till 4x 1x/sec.
release and wait till + 1x/sec., keep out of sensor area
wait till 1x con rmation, ready for operation
sensor range
set / programm
1x app. 2 sec. till 1x extended function mode is active
6 1-8 steps
2x a app. 0,5 sec. pulsing
1x app. 15 sec. till 1x - 8x
1x = min. ...... 8x = max.
ignore ashes 4x after 5 sec., keep touched
till 1x - 8x after app. 15 sec., releasing
de nes sensor range step
release and wait till + 1x/sec., keep out of sensor area
wait till 1x con rmation, ready for operation
security off permanent when without movement only - -
empty battery 2x/sec. during dedecting hand / object - -
XXX
XXX
XXX
XXX