www.iReliev.com 5
STEP BY STEP OPERATION GUIDE FOR TREATMENT
For best results, we recommend using the heating pad in either a lying or sitting position.
1. Insert the power cord into the heating pad. Please ensure the groove and the pins align and slide into place.
2. Plug power cord into a standard 120V outlet. If you are using this device internationally, please use a international adapter.
3. Place the pad in the area of treatment and power on by pressing the ( ) on the hand control.
4. Select Temperature: To select the temperature for your treatment session, press the mode button (M) on the hand control and
a blue light will appear above the ( ). Once the temperature setting is selected, press the ( ) to increase or the ( ) to decrease
the temperature, then press (M).
5. Select Treatment Time: Once the temperature has been selected, you will now select your Treatment Time for your treatment
session. To select your treatment time, press the ( ) to increase or the ( ) to decrease the time.
Note: Once your settings are selected, Treatment Temperature and Treatment Minutes will be displayed on hand control.
Note: Once the Treatment Time has elapsed, the controller will automatically turn off.
Note: Treatment Temperature can be adjusted in 10-degree ( ) increments from 55-160.
Note: Treatment Minutes can be adjusted in 5-minute intervals from 5-300 minutes.
Recommendation for Use:
• Get into a comfortable position, either lying or sitting down.
• Create a barrier between the Infrared Heating Pad and the users skin. Place a small towel to act as layer between the two.
Stones do not need to be directly on skin to be considered effective treatment.
• Adjust temperature so that it is more comfortable for you. The temperature should never be hotter that you can tolerate.
• Place pad directly over affected area. Use protective layer such as towel.
• When using the pad, stones should be facing your body.
• There is no specifi c protocol for any individual with certain conditions using a infrared Infrared Heating Pad. Everybody tends
to respond differently to treatment. Start using infrared Infrared Heating Pad for 20 minute sessions that progress as you
develop greater tolerance and comfort.
• Longer therapy session may require you to reduce temperature.
Place the pad in the area of treatment and power on by pressing the ( ) on the hand control.
a blue light will appear above the ( ). Once the temperature setting is selected, press the ( ) to increase or the ( ) to decrease
Treatment Temperature can be adjusted in 10-degree ( ) increments from 55-160.
