Irenis HDE-265 User manual

IRENIS®HDE-265 Encoder
www.irenis.com
1/16
IRENIS HDE-265 HDMI Encoder User’s Manual
Introduction
IRENIS HDE-265 HDMI HD Encoder is used for high-definition video signal (720P / 1080P, etc.) encoding and network transmission,
using the latest and high-efficient high-definition digital video compression technology H.265, with the characteristics of reliable,
high-definition, low bit rate and low latency. Input the HDMI high-definition video signal to conduct the encoding process, after
compression processing of DSP chip, output the standard TS network stream, the launch of product fills the gap in this
industry, which is a direct replacement for the traditional capture card or software coding method, using hard-coded, the system
is more stable, and image quality is more perfect, which can be used in a wide variety of needs for high-definition video and high-
resolution and high frame rate acquisition-based IP network transmission, its powerful scalability makes it more easily to respond
to the needs of different industries and can be used as live video encoder. Industrial controlled, precision design, small size, easy
installation, the power is less than 5W, which is more energy and more stable.
Interfaces
1) Power input ----- 12V / DC input, using 12V1A power supply, if it is 5V input, chose 5V / 2A.
2) Initialization button------it is used to reset the device, when turned on, press and hold for 10 seconds, the device IP will back to
factory IP, 192.168.0.31
3) HD video input ------ it is used for HDMI signal input.
4) 1000M network port ------ 1000M Ethernet interface.
5) Status indication ------- if there is internet connection, the display light is on, when there is no network, the light is off. At reset,
if the light is not on after 10 seconds, the device is restarted.
6) Power indication--- to indicate if the power is normal

IRENIS®HDE-265 Encoder
www.irenis.com
2/16
SPECIFICATION
Input：
Video
HDMI
Resolution
1920×1080_60i/60P、1920×1080_50i、1280×720_60p
1280×720_50p, etc
Coding
H.264/H.265
Rate
0.8Mbps~12Mbps
Rate Control
CBR/VBR
GOP type
Adjustable
Video preprocessing
De-interlacing, noise reduction, sharpening
Audio：
Encoding format
AAC、MP3
Sampling rate
Auto
Bit rate
32K, 44.1K, 48K, 64K, 96K, 128K, 160K, 192K
Sampling accuracy
24 bit
Code rate
64Kb/s~384Kb/s
System：
RJ45
1000M internet access
Head stream
HTTP, UTP, RTSP, RTMP,ONVIF protocol
Configuration interface
WEB operation interface
Upgrade
The software can be upgraded through internet
General：
Size
(width x length x height) 165*85*24mm
Weight
Single set 0.3KG
Temperature Range
-20~60℃(working),-20~80℃(storage)
Power supply
12V/1ADC
Power consumption
5W/1 channel

IRENIS®HDE-265 Encoder
www.irenis.com
3/16
Settings
Step 1: Reset & initialization
Input the power supply to turn on encoder and hold a pin to press RST on the encoder for 10 seconds, it will be restarted
and initialized. The default Route IP of dash board is 192.168.0.31 after initialization.
Step 2: Change the administrator’s computer IP (example in WIN 7)
Set the administrator’s computer IP as: 192.168.0.* to avoid IP conflicting with dashboard IP 192.168.0.31. (mark “*”
numbers range will be 0-254 except 31 )
Step 3: Login Dash board in IE
Enter 192.168.0.31 in URL address,
Default user Name: admin
Default password: admin

IRENIS®HDE-265 Encoder
www.irenis.com
4/16
Step 4. Status Display

IRENIS®HDE-265 Encoder
www.irenis.com
5/16
Note:
Input Status: Display input resolution
Mainstream Status: Display mainstream output resolution and access address
Secondary flow state: Display secondary stream output resolution and access address
Mainstream Live View: First, install the soft of VLC 2.2.1. Then you can browse the mainstream video through your PC
Secondary Stream Live View: First, install the soft of VLC 2.2.1. Then you can browse the secondary stream video
through your PC
Step 5: Network Settings
Changing default dash board IP
Note: Default IP is 192.168.0.31. if IP setting is forgotten after changing. You can reset it to default IP follow step 1 above.

IRENIS®HDE-265 Encoder
www.irenis.com
6/16
Step 6: Mainstream Encoding Setting
Main stream setting
 Enc type: H.264 & H.265 is optional
 Profile: baseline profile / main profile / high profile
 Frame rate: 5-60 (when the input resolution is 1080i50, the frame rate will choose 25)
 Bitrate mode: VBR / CBR
 Group of picture: 30
 Bitrate: 16-1200K (Network bandwidth setting)
Mainstream protocol setting

IRENIS®HDE-265 Encoder
www.irenis.com
7/16
OSD Setting
Image quality settings
7) Step 7. Side stream Encoding Setting
Secondary stream Setting
 Enc type: H.264 & H.265 is optional
 Profile: baseline profile / main profile / high profile
 Frame rate: 5-60 (when the input resolution is 1080i50, the frame rate will choose 25)
 Bitrate mode: VBR / CBR
 Group of picture: 30
 Bitrate: 16-1200K (Network bandwidth setting)

IRENIS®HDE-265 Encoder
www.irenis.com
8/16
Sidestream protocol setting

IRENIS®HDE-265 Encoder
www.irenis.com
9/16
OSD Settings
Note: the same with the mainstream setting
RTMP（Real Time Streaming Protocol）settings

IRENIS®HDE-265 Encoder
www.irenis.com
10/16
Sep 1: Set H.264 level: baseline profile
Sep 1: Set RTMP protocol: Enable
Sep 1: Set RTMP sever IP
Sep 4: Set RTMP sever port
Sep 5: Set RTMP stream name
Sep 6: Sever test:
Install software: Flash+Media+Server 3.5 there’s no need for serial number when install, both user name and code are
“1”.
Start background software:
Open up the file of Flash Player: VideoPlayer.html
Type in : rtmp://ip address / rtmp / hdmi ,choose live, then can see the image or type in ：
rtmp://192.168.1.100:1935/live/hdmi choose：LIVE click：Play stream

IRENIS®HDE-265 Encoder
www.irenis.com
11/16
HDMI OSD settings
Note: if no need for watermarks, space should be entered in “text”.
VLC decoding configuration
1. How to play video source via VLC
VLC software version NO: 2.0.1

IRENIS®HDE-265 Encoder
www.irenis.com
12/16
Note：”/hdmi” can be removed under HTTP protocol streaming.
2. How to streaming video via VLC

IRENIS®HDE-265 Encoder
www.irenis.com
13/16

www.irenis.com
14/16
IRENIS®HDE-265 Encoder
Destination Setup
SelectthestreaminoMethodsandadcl
MPEG Transport Stream
UDP 0.egacy)
V_d_eo H._2 P3 P4_
Back Next Cancel

www.irenis.com
15/16
IRENIS®HDE-265 Encoder
8) Audio Setting
9) System settings

www.irenis.com
16/16
IRENIS®HDE-265 Encoder