IRISBOND DUO Setup guide

Quick Start User Guide
Versión 1 10/01/2017
© Irisbond 2017 Paseo Mikeletegi 56, 20009 San Sebastián, España www.irisbond.com
1
ASSEMBLY
Choose which device you wish to use: a laptop or a desktop
PC. Stick the mount on the surface of the device you have
chosen and do not touch the mount for the next 8 hours.
Alternatively, you can choose to position the Irisbond Duo
on flat surface (i.e. table) in front of the screen. Next, attach
the Irisbond Duo to the support and attach both to the
mount.
Support
Mounts
s

Quick Start User Guide
Versión 1 10/01/2017
© Irisbond 2017 Paseo Mikeletegi 56, 20009 San Sebastián, España www.irisbond.com
2
INSTALLATION
Insert the USB drive and install the Primma eyetracking
software.
3
ACTIVATE LICENSE
Select Load Activation File. Open the folder on the USB
drive and select the activation file. The file name will have
the following format: 123456activationPrimma.txt.
4
SETTINGS
Open Primma and click the Settings button.
5
USERS
Go to the Users tab and select your language. Create a new
user profile and save your preferences in this profile.
6
CLICK OPTIONS
Go to the Click Options tab. Choose the click option that you
will use to select items with your eyes: dwell, blink or
external click. Adjust the time needed to make a selection.
Use Smooth to adjust cursor speed.

Quick Start User Guide
Versión 1 10/01/2017
© Irisbond 2017 Paseo Mikeletegi 56, 20009 San Sebastián, España www.irisbond.com
7
POSITIONING
Go to the Configuration tab and select Positioning. Follow
the onscreen instructions.
8
CONFIGURATION PARAMETERS
Change the calibration parameters depending on the user’s
needs: choose binocular or monocular eyetracking, the
number of calibration points and the display time per
point. Both will depend on how much precision and
attention the user will need. You can customize calibration
points by adding your own images and/or sounds.
9
CALIBRATION
Click on Calibrate and follow the points with your gaze. A
result lower than 20 with all points in green is
recommended. If you obtain this result, click on Accept. If,
however, the result is higher than 20, select the Improve
option.
10
ACTIVATE EYETRACKING
To begin eyetracking click on the button with the white
mouse icon. Use the remaining buttons to facilitate access
to other functions such as double click, right click, drag and
drop, zoom, etc.