19
Using IrisVision: Step 3 - Set Up Focus
Slowly spin the focus wheel on the top center of your
headset to adjust the focus, similar to adjusting
binoculars.
1. After powering on your headset, it should
automatically show Focus mode. It contains an image
with beach chairs and umbrellas. If you are not in
Focus mode, press the mode button until you hear
“Focus” and see the large bold letters.
2. Reset the focus by rotating the wheel as far left as
possible.
3. Slowly begin adjusting it by rotating the wheel
towards the right until the object is in focus. Youcan
rotate the wheel in either direction as needed.
4. Pick an object at least 4 feet away to look at through
your screen. Try looking at a picture on the wall or a
family member’s face.