iRV iRV6500BT User manual
Car DVD/CD Receiver
iRV6500BT
INSTRUCTION MANUAL
AV IN/AUX IN
AV IN/AUX IN
1 8 913 3 2 117 6 10 19 2015 1814
4
1-6
25524 28 23 16 21 2217 272612
EN-2
BEFORE YOU BEGIN
PRECAUTIONS:
CAUTION:
USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
• Keepthismanualhandyasareferenceforoperatingproceduresandprecautions.
• Alwayskeepthevolumelowenoughsoyoucanhearsoundsoutsideofthecar.
• Protectthisproductfrommoisture.
• Ifthebatteryisdisconnectedordischarged,thepresetmemorywillbeerasedandmustbereprogrammed.
FEATURES:
DVD video playback
ItispossibletoplaybackDVDvideo,DVD+-R,DVD+-RWandDVD+-DL.
Video CDs featuring PBC compatibility
ItispossibletoplaybackVideoCDsfeaturingPBC(playbackcontrol).
CD playback
MusicCD/CD-R/CD-RWplaybackispossible.
MP3 le playback
ItispossibletoplaybackMP3/WMAlesrecordedonCD-ROM/CD-R/CD-RW.
PAL/NTSC compatibility
ThisunitisPAL/NTSCsystemcompatible.Whenconnectingothercomponentstothisunit,besurecomponentsare
compatiblewiththesamevideosystemorelseimageswillnotbecorrectlyreproduced.
Multi-aspect
Switchingbetweenwidescreen,letterboxandpanscandisplayispossible.
Multi-audio
YoucanswitchbetweenmultipleaudiosystemsrecordedonaDVDasdesired.
Multi-subtitle
YoucanswitchbetweenmultiplesubtitlelanguagesrecordedonaDVDasdesired.
When an operation is prohibited
WhenyouarewatchingaDVDandattempttoperformanoperation,itmaynotbesupportedbytheprogramming
onthedisc.Whenthishappens,thisunitindicatesonthescreen.
Warning:
Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
“This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.”
CLASS 1
LASER PRODUCT
A class 1 laser is safe under all conditions of normal use.
This means the maximum permissible exposure (MPE) cannot be exceeded.
EN-3
INSTALLATION
Selecting the Mounting Location
Selectamountinglocation,takingcaretoavoidthefollowing:
• Placesexposedtoheat-radiatingappliancessuchaselectricheaters
• Adjacenttoothersequipmentthatradiatesheat
• Poorly-ventilatedordustyplaces
• Moistorhumidlocations
Preparing the Opening
Usethemountingholediagram(below)tomeasureandcutamountinghole,andmounttheunitusing
thefourM3x30mmscrewsprovided.
118.8mm
133mm
247.9mm
236.2mm5.8mm
19mm
247.9mm
265mm
178mm
MAIN UNIT
RECOMMENDED CUTOUT
MOUNTING SCREWS M3x30
WITH ø3 SPRING WASHER AND
ø3 FLAT WASHER 4xPLACES
NOTE: Before cutting the mounting hole, make sure the area behind the mounting location is clear
of wires, fuel and vacuum or brake lines.
Mounting the Radio
Routepower,speakerandantennacablesthroughthehole,andconnectthemtotheunitasoutlinedin
thewiringdiagram.Afterensuringcorrectconnections,testoperation.
• Tablet/SmartPhoneopenbluetoothconnection.OpentheApp onTablet/SmartPhone.
• Tablet/SmartPhonethroughApp.controlsCarAudioinbluetoothconnection.
Modied Pin Code/Device:
• Press“ ”inthescreenofTablet/SmartphonetochangetheBluetoothPINcode.Input4desireddigits,
press“OK”iconthenrestarttheunit(iRV6500BT),therevisedPINcodewillbesavedintotheunitautomatically.
• Press“ ”inthescreenofTablet/SmartphonetochangetheBluetoothdevicename.Whenadesired
devicename(max.16alphabet)isinputted,press“OK”iconthenrestarttheunit,yourdesireddevicename
willbesavedintotheunitautomatically.
Use New Pin Code/Device:
•
Press“ ”buttontoturnONunit.
• ActivatetheBluetoothfunctiononTablet/SmartphonetosearchforBluetoothdevices.OnceaBluetoothsearchiscompleted,therevised
devicenamewillbedisplayed.ClickthereviseddevicenameandinputtherevisedPINcodetoconnectBluetooth.
Restore the default Bluetooth passcode and name:
• PressT/Fand3RPTbuttonssimultaneouslythenrestarttheunittorestorethefactorydefaultedPINcodeanddevicename.
Noted:
• Once a modied device name and PIN code are established then restart the unit, Bluetooth will be connected automatically for most of the
cases, depending on the devices. However, if the Tablet/Smart phone is failed to update the device name, please disconnect Bluetooth
then to search/scan again until your desired device name is displayed in your Tablet/Smart phone.
• If pairing is not successfully made with the unit and your Tablet/Smart phone, please switch OFF/ON the Bluetooth signal of your Tablet/
Smart phone repeatedly until the connection is made. In the meantime, please also restart the unit.
• Depending on the Bluetooth version, a Bluetooth compatible device may not be able to communicate with this unit.
• Proper function of this unit with all Bluetooth compatible devices is not guaranteed.
Instructions for App “RemoCon” with Car Audio
21
10
(1-6)
91213 11 8 7
3 5 64
1. Mode
2. ModiedPinCode
3. ModiedDevicename
4. Speaker(A,B,C)
5. PowerOn/Off
6. SelectBand(FM/AM)
7. VolumeControl
8. Mute
9. DisplayModestatus
10.PresetStations(1-6)
11.Play/Pause
12.Stop
13.Track/Search/SeekTuning
Locations of Parts (App “RemoCon” interface):
EN-4
WIRE CONNECTION
Audio Line Out: White (L) Red (R)
Audio Line In: White (L) Red (R)
I & II Video Outputs: Yellow
ConnecttoexternalA/Vsystemtodisplay
Maintenance
FUSE REPLACEMENT
Ifthefuseblows,checkthepowerconnectionandreplacethefuse.Ifthefuseblowsagainafterthe
replacement,theremaybeaninternalmalfunction.Inthiscase,consultyournearestrepairingcenter.
Warning
Usethespeciedamperagefuseforeachlead.Useofahigheramperagefusemaycauseserious
damage.
ISO CONVERTER
FUSE 15A
RR
LINE IN
VIDEO OUT
ANTENNA LINE OUT
LL
III
(+12V) MEMORY
GROUND
(+12V) AUTO ANTENNA
(+12V) IGNITION KEY
YELLOW
BLACK
BLUE
RED
PINK(+)
PINK/BLACK(-)
GREEN(+)
GREEN/BLACK(-)
ORANGE(+)
ORANGE/BLACK(-)
WHITE(+)
WHITE/BLACK(-)
BROWN(+)
BROWN/BLACK(-)
GREY(+)
GREY/BLACK(-)
RIGHT
SPEAKER ‘C’
LEFT
SPEAKER ‘C’
REAR RIGHT
SPEAKER ‘B’
FRONT LEFT
SPEAKER ‘A’
REAR LEFT
SPEAKER ‘B’
FRONT RIGHT
SPEAKER ‘A’
A
B
B
C
C
A
EN-5
1. POWERON/OFF( )
2. SELECTFUNCTIONBUTTON(SEL)
3. VOLUMECONTROL
4. PRESETSTATIONS(1,2,3,4,5,6)
5. BAND(BD)/LOUDNESS(LD)/MEDIACHANGEBUTTON(MEDIA)
6. MODEBUTTON(MODE)
7. AUTOSTORE/PRESETSCAN(AS/PS)
8. DVD/CDTRACK/SEARCHBUTTON( /)
9. SEEKTUNING
10.MUTE(MUTE)
11. TIME/FREQUENCYDISPLAY(T/F)
12.MAINMENU(MENU)
13.ALARMSET(ON/OFFALARMSET)
14.SPEAKER(A,B,C)
15.LCDDISPLAY
16.CDEJECTBUTTON( )
17.CDSLOT
18.PLAY/PAUSEBUTTON( )
19.INTROBUTTON(INT)
20.REPEATBUTTON(RPT)
21.RANDOMBUTTON(RDM)
22.SEARCHPREVIOUS/NEXTFOLDER(FL-/FL+)
23.USBPORT
24.SDSLOT
25.AVIN/AUXIN
26.DIGI-PORT(FORDIGITALMP3PLAYER)
27.EARPHONEJACK
28.RESET
Locations of Parts (Main unit)
AV IN/AUX IN
AV IN/AUX IN
1 8 913 3 2 117 6 10 19 2015 1814
4
1-6
25524 28 23 16 21 2217 272612
EN-6
Locations of Parts (Remote Control)
1. POWERON/OFF
2. MODE
3. PLAY/PAUSE
4. TITLE/PLAYBACKCONTROL
5. SELECT
6. SEEK+/SEEK-/CDTRACK/SEARCH
7. VOL+/VOL-
8. GOTO
9. AUDIO
10.ENTER
11. NAVIGATION
12.AUTOSEEK/PRESETSCAN/REPEAT
13.RANDOM/BAND
14.LOUDNESS
15.INTRO
16.SUBTITLE
17.SETUP
18.EQUALIZER/ANGLE
19.SLOWMOTION
20.ZOOM/A-BREPEAT
21.STOP
22.ONSCREENDISPLAY
23.MUTE
24.MAINMENU
25.STEP(FRAMEBYFRAMEPLAYBACK)
26.PAL/NTSCSYSTEM
27.FOLDERDOWN/UP
28.TWODIGITTRACKSSEARCHS
29.KEYPAD
Loud STEP
Band
1
814 17 4
24
25
2 3 23
VOL+/-
10
1118
16
9
19
22
13
28
5
20
26
21
12
15
29
27
7
6
Use and care of the remote control
Installing the battery
Slidethetrayoutonthebackoftheremotecontrolandinsertthebatterywiththe(+)andminus(-)polespointingin
theproperdirection.
• Whenusingforthersttime,pulloutthelmprotrudingfromthetray.
CAUTIONS
• Removethebatteryiftheremotecontrolisnotusedforamonthorlonger.
• Donotrecharge,disassemble,heatordisposeofthebatteryinare.
• Donotstorethebatterywithmetallicmaterials.
• Intheeventofbatteryleakage,wipetheremotecontrolcompletelycleanandinstallanewbattery
• Whendisposingofusedbatteries,pleasecomplywithgovernmentregulationsorenvironmentalpublicinstitution’s
rulethatapplyinyourcountry/area.
• Alwayscheckcarefullythatyouareloadingthebatterywithplus(+)andminus(-)polesfacingtheproperdirections.
Using the remote control
Pointtheremotecontrolinthedirectionofthefrontpaneltooperate.
IMPORTANT
• Donotstoretheremotecontrolinhightemperaturesordirectsunlight.
• Donotlettheremotecontrolfallontotheoor,whereitmaybecomejammedunderthebrakeoracceleratorpedal.
EN-7
GENERAL OPERATIONS
Turning the unit ON/OFF ( )
Press“ ”buttontoturnON/OFFunit.
Selecting a source (MODE)
PressMODE repeatedlytoswitchbetweenTUNER,DISC,USB,SD,DIGI-PORT,BTPLAY,AUXINandAVINmode.
Main Menu (MENU)
PressMENUbuttontoshowtheMAINMENU.Turning
VOLVOL
or
VOLVOL
andpressSELtoselectfunctionmode.
Loading a Disc
MakesurepoweristurnedONbeforeloadingdisc.Insertadiscintothediscloadingslot
Ejecting a Disc
MakesurepoweristurnedONbeforeejectingdisc.Press buttontoejectdisc.
Adjusting Volume/Bass/Treble/Balance/Fader
• HeadUnit:TurningtheVOLknobRightorLeft.Increaseordecreasethevolumebyturning
VOLVOL
or
VOLVOL
.PresstheSEL(2)button
brieyuntiltheBASS,TREBLE,BALANCEandFADERfunction.
• RemoteControl:PressVOL+ or VOL- toincreaseordecreasevolume.
Further settings via the multi controller
PressandholdSELbuttontoadjustLOCAL/STEREO/BEEP/ADJUSTTIME/AUDIODSP/U.S.A:
2 sec.
BEEP SELDSP SELU.S.A
SEL
STEREO
SEL
LOC
SEL
LOCAL/DX
TurnVOLknobtoselectLOCAL/DX.“Local”positioninareaswithstrongsignalstoletradiostopatonlystrongstationsduringmanual
tuning(LOCappears).PresstoDistantpositioninareaswithweaksignalstolistentoallstations.
STEREO/MONO
TurnVOLknobtoselectSTEREO/MONO.
WhenreceptionofanFMstationisweak,listeningqualitycanbeimprovedbyswitchingto
monosound
.
BEEP MODE
TurnVOLknobtoselectALL/2nd/OFF.
ALL Buttonsoundisonpermanently
2nd Buttonsoundistriggeredbysecondarybuttonfunctions(holdbuttondownforawhile)
OFF Buttonsoundisoff
AUDIO DSP CONTROLS
TurnVOLknobtoselectFLAT/POP/ROCK/CLASSICAL.
Select U.S.A/Europe Area Band
TurnVOLknobtoselectU.S.A/EUROPEband
Mute Button
• HeadUnit:Press“MUTE”buttononcetomutethesound,pressagaintoresume.
• RemoteControl:Press buttontomutethesoundatonce.Pressagaintoreturntopreviousvolumelevel.
Loud Button (LD)
• HeadUnit:PressandholdBD/LD/MEDIAbuttontoturnon/offLOUDfeature.
Note: Press BD/LD/MEDIA button in DISC/SD/USB mode to select between Music/Movie/Photo
• RemoteControl:PressLoudbuttononremotecontroltoturnon/offLOUDfeature.
Equalizer (EQ)
Remote:PressEQbuttontoselectbetweenFlat/Classic/Pop/Rock/DSPOffequalizemodes.
Display Info (T/F)
PressT/FbuttontoselectthedisplaybetweenTimeandFrequency..
Clock Setting
1. HoldandpresstheT/Fbuttonfor2sec.,
2. Turn VOLknobtoadjusthour,
3. PresstheT/Fagainandthenumberrepresentingforminutewillbeashing,
4. TurnVOLknobtoadjustminute,
5. PresstheT/Fbuttonagaintoconrmthesettings.
Alarm Setting
PressALARM SETbuttontoselectON/OFF
To set the alarm:
PressandholdALARM SETbutton,TurnVOLtoadjustthehour,pressALARM SETbuttonagainbrieyandthenumberrepresenting
theminuteswillash.TurnVOLtoadjusttheminutes.
Alarm status:Stopautomaticanyplayback.Pressanybuttontoresume.
Speaker Output
Thethreespeakeroutputbuttons(SPEAKER A, SPEAKER B, SPEAKER C)controlspeakeroutputfromtheunit.Pressanyofthethree
buttonstoturnthecorrespondingspeakersetsONorOFF.Theredlightaboveeachbuttonwillilluminatewhenthatspeakersetison.
Note: When the Speaker sets ON or OFF, pay attention Fader setting (sound distribution between the front and rear speakers), from
F=R to10F and from F=R to 10R)
EN-8
Earphones
ConnectthestereoearphonestothePhonejack
Note: Extended listening of music at high volume may damage your hearing. It is highly recommended to use at comfortable volume
levels.
RESET
Resetbuttonisplacedonthehousing.Toreset,useasharppointobjectandpressandholdtheRESETbuttonfor2seconds.
Theresetbuttonistobeactivatedforthefollowingreason:
• Initialinstallationoftheunitwhenallwiringiscompleted.
• Allthefunctionbuttonsdoesnotoperate.
• Errorsymbolonthedisplay.
LISTENING TO RADIO
Band (BD)
PressBDbuttonrepeatedlywilltogglecyclicallybetweeneachband.FM1--FM2--FM3--AM1--AM2.
Automatic or Manual tuning ( / )
Whenpressedshort,thesekeysareoperatedasAUTOMATICtuningmode.
Whenpressedlongerthan1sec.,theyareoperatedasMANUALtuningmode.
Auto Store/Preset scan (AS/PS)
Preset Scan -Bypressingshortly,theradioplayseachpresetstationfor5seconds.
Auto Store -Bypressinglongerthan1sec,AutoStoreisactivated.The6strongeststationsarepresetandstoredinthecorresponding
presetnumber.WhenAutoStoreoperationisnished,theradioexecutesthepresetscan.
Storing and Recalling Frequencies
IfyoupressanyoftheNUMBER(1-6)youcaneasilystoreuptosixbroadcastfrequenciesforlaterrecallwiththetouchofabutton.
1. ChooseadesiredBAND.
2. Whenyoundafrequencythatyouwanttostoreinmemory,pressaNUMBER(1-6)andholduntilthepresetnumbershowsand
litinthedisplay.
3. Theselectedradiostationfrequencyhasbeenstoredinmemory.ThenexttimeyoupressthesameNUMBER(1-6)theradio
stationfrequencyisrecalledfrommemory.
Note: Up to 6 stations can be stored in each band.
OPERATIONS COMMON FOR MEDIA
Listen music, see movie, viewing photo
1. Insertdisc,USBstickorSD/MMCcardcontainingcorrelativeformatles.
2. Pressremote( )Keyandhold2secondrepeatedlytoselectbetweenMusic/Movie/Photo.
3. Usingremote( , )keytoselectaleandpressEnterkeytoplay.
UsingHeadunit:PressBD/LD/MEDIAbuttontoselectbetweenMusic/Movie/Photo.
Files Search:
WhenDisc,USBorSD/MMCcontent
PHOTO Viewing:
Head unit:
Filessearchforstopmode:
1. PressAS/PSbuttontostopanyplayback.
2. Press /buttontoselect“photo”listcontent.
3. Press5 FL-/6 FL+toselectfolder.
4. Rotatevolumeknobtoselect*.JPGletoviewingorpushedvolumeknobtostartplayfromrstphoto.
5. Press fornextphoto.
6. Press forpreviousphoto.
7. Press3 RPTbuttonrepeatedlytoselectRep-1/Rep DIR/Rep ALLrepeatedlyplaybackuntilpress[A/PS]button.
Remote control:
Filessearchforstopmode:
1. PressStopbuttontostopanyplayback.
2. Pressandhold2sec( )buttonrepeatedlytoselect“photo”lelisted.
3. Press( )buttontolistphotofolder.
4. Press( , )buttontoselectdesiredfolderthenpressEntertoconrm.
5. Press( , )buttontoselectdesiredJPGlethenpressEnterbuttontostartplaybackphoto.
6. PressSEEK+ fornextphoto.
7. PressSEEK- forpreviousphoto.
8. PressRPTbuttonrepeatedlytoselectRep-1/Rep DIR/Rep ALLrepeatedlyplaybackuntilpressStopbutton.
CD/MP3 Music listening:
Head unit:
Filessearchforstopmode:
1. Press AS/PSbuttontostopanyplayback.
2. Press /buttontoselect“MUSIC”listcontent.
3. Press5 FL-/6 FL+toselectdesiredfolder.
4. Rotatevolumeknobtoselectmusicletoplaybackorpushedvolumeknobtostartplayfromrstle.
5. Press fornextle.
6. Press forpreviousle.
7. Press1 PAUbuttonforpause,pressagainforresumeplayback.
8. Press2 INTbuttonrepeatedlyforintroplay,youcanselectINTRO DIR/ALL/OFFtointroducingplayeachle10sec.
9. Press3 RPTbuttonrepeatedlytoselectRep-1/Rep DIR/Rep ALLtorepeatedlyplaybackuntilpressA/PSbutton.
10.Press4 RDMbuttonrepeatedlytoselectRANDOM DIR/ALL/OFFtorandomplaybackDIRorALL.
EN-9
Remote control:
Filessearchforstopmode:
1. PressStopbuttontostopanyplayback.
2. Pressandhold2sec( )buttonrepeatedlytoselect“MUSIC”lelisted.
3. Press( )buttontolistedmusicfolder.
4. Press( , )buttontoselectdesiredfolderthenpressEntertoconrm.
5. Press( , )buttontoselectdesiredlethenpressEnterbuttontostartplaybackmusic.
6. PressSEEK+ fornextle.
7. PressSEEK- forpreviousle.
8. Press buttonforpause,pressagainforresumeplayback.
9. PressINT buttonrepeatedlyforintroplay,youcanselectINTRO DIR/ALL/OFFtointroducingplayeachle10sec.
10.PressRPTbuttonrepeatedlytoselectRep-1/Rep DIR/Rep ALLrepeatedlyplaybackuntilpressStopbutton.
11. PressRDMbuttonrepeatedlytoselectRANDOM DIR/ALL/OFFtorandomplaybackDIRorALL.
Movie Playback:
Head unit
Filessearchforstopmode:
1. PressAS/PSbuttontostopanyplayback.
2. Press /buttontoselect“Movie”listed.
3. Press5 FL-/6 FL+toselectdesiredfolder.
4. Rotatevolumeknobtoselectmovieletoplaybackorpushedvolumeknobtostartplayfromrstle.
5. Press fornextle.
6. Press forpreviousle.
7. Press3 RPTbuttonrepeatedlytoselectRep-1/Rep DIR/Rep ALLrepeatedlyplaybackuntilpressA/PSbutton.
Remote control:
Filessearchforstopmode:
1. PressStopbuttontostopanyplayback.
2. Pressandhold2sec( )buttonrepeatedlytoselect“Movie”lelisted.
3. Press( )buttontolistedmoviefolder.
4. Press( , )buttontoselectdesiredfolderthenpressEntertoconrm.
5. Press( , )buttontoselectdesiredmovielethenpressEnterbuttontostartplayback.
6. PressSEEK+ fornextle.
7. PressSEEK- forpreviousle.
8. PressRPTbuttonrepeatedlytoselectRep-1/Rep DIR/Rep ALLrepeatedlyplaybackuntilpressStopbutton.
Stopping Playback
1. PressStoponremotecontrolduringplaybacktostopplayback.Thatpositionisstoredinmemory.
2. Press tocontinue.Playbackstartsfromthetrackatwhichitwasstopped.
Fast Forward / Fast Reverse
1.Duringplayback,pressandhold or . Unitscansatthespeedofx2-x4-x8-x20
2.Toresumenormalplaybackatadesiredpoint,press .
Note: No sound is come out during fast forward/fast reverse at over x4 high speed search.
Finding the Beginning of Tracks
Duringplayback,press or .
:Presstostartplaybackfromthebeginningofthepreviouschapterortrack.
:Presstostartplaybackfromthebeginningofthefollowingchapterortrack.
Pause Playback
Duringplayback,press .Pressagaintoresumeplayback.
A-B Repeat Playback
Thisfeatureallowsyoutoloopplaybackasectionofthemovie/audiostartingfromPointAtoB.
1.Pressthe buttontoplaythemovie/audio.
2.Onceyouhavelocatedthesectionyouwishtoplaybackonlooprepeat,pressRemote’sA-B button.Youwillsee“Rep-A” onthe
screen.
3.Letthemovie/audioplayonuntilyouhavereachedtheendofthesectionyouwishtowatchoncontinuousloop.Onceyouhave
reachedthispoint,pressremote’sA-B buttonagain.“Rep-A-B” willappearonyourscreen.PlaybackwillnowstartfromPointA–B.
4.TostopA-Brepeatplayback,pressremote’sA-B buttononcemoreuntil“A-B CANCEL” disappearsandnormalplaybackresumes.
Displaying information (OSD) - video les only
Duringplayback,youcanseeallinformationandcurrentplaysettings.Displaywillshowrelated,elapsetime,titlenumber,chapter
numberandotherinformation.
PressOSD ontheremotecontrolonce.Unitwilldisplaythediscelapsetime.
PLAYING USB / SD MEMORY CARD FILES / DIGI-PORT & AV IN/AUX IN
AV IN/AUX IN
An external audio source (e.g. portable MP3 player) can be connected to theAUX IN socket to be played back by the vehicle
loudspeakers.
1.ConnecttheAUXINsocketwiththeaudiooutputoftheexternaldevice.
USB/SD Memory Card
ThedeviceisequippedwithaUSBinterfaceandamemorycardreaderforSDcards.MP3orWMAlesstoredonthesemediacan
beplayed.
EN-10
Note:
-
Due to the great variety of devices with USB and SD card interfaces that sometimes have manufacturer-specic functions, we cannot
guarantee that all media will be recognized and that all operational functions will be available with this device.
- You cannot operate USB hard drives on the device.
-
It maybe necessary to turn the ash memory ON so that it can be read.
1. PlugyourUSBstoragemediumintotheUSBport.
2. Ifyouuseamemorycard,insertitintothememorycardreader.
3.
Theplayerautomaticallyswitchestotheinputusedandstartsplayback.
4. Seethesectiononoperationscommonforaudio/videolesonhowtocontrolUSBormemorycardplayback.
USBPORTAUXIN/AVINSD CARDDIGI-PORT
AV IN/AUX IN
PLAYING DVD/VIDEO CD
Playback
1.
Insertadisc.Whenthediscoffersamenu,themenuisdisplayed.Whenadiscalreadyinserted,pressMODEtoswitchtodiscmode.
2.On DVDs and video CDs with playback control (PBC), menu screens may appear automatically. If this happens, perform the
operationdescribedbelowtostartplayback.
CAUTION: MakesurethattheVideoTVsystemsettingsissetcorrectlyaccordingtoyourdiscyourplaying.Ifyouarenotsure,leave
itsetto“Auto”.ImpropersetupofTVsystemmightcausethevideotostop/skip/pauseplayingalthoughaudiomightcontinuetoplay.
YoucansetupvideoTVsettingsusingtheSETUP featureoftheremotecontrol.Referto“SETTING UP THE DVD PLAYER” section.
DVD menu
Press , , , toselectthedesireditem,thenpressEnter.
Video CD menu
Usethenumberkeys(“0”to“9”)toselectthedesirednumber.ThemenuscreendoesnotappearwhenthePBCfunctionisturnedoff.In
thiscase,pressandholdbuttontoturnonPBCfeature.
Turning PBC ON/OFF (VCD only)
PBC (Playback Control) is a feature found on VCD 2.0 and SVCD 1.0. PBC allows control of the playback of play items and the
possibilityofinteractionwiththeuserthroughtheremotecontrolorsomeotherinputdeviceavailable.Ifit’son,theplayerwon’tauto
startafterinsertingthediscbecauseitwilltaketimetoselectprogramondisc;ifit’soff,theplayerwillautoplaybacktheprogramon
disconebyone.
1.ToturnONPBCfunction,pressPBC ontheremotecontrol.ToturnOFF,pressthebuttonagain.
Note:
• Not all VCD/SVCD disc have PBC functions.
• While playing VCD and PBC function is turned ON, Repeat / Intro / Random function will not work.
Repeat Playback
FOR VCD
1. PressRPT ontheremotecontrolduringplayback.
2. Everytimeyoupressthisbutton,theunitswitchestothefollowingsettings:
Repeat 1 –Repeatthecurrentplaybacktrack.
Repeat All –Repeatallfoldersandtracks.
Repeat Off –TurnOFFrepeatfunction.
Note: PBC feature in VCD disc needs to be STOP in order to use Repeat playback.
FOR DVD
Youcanchoosebetweenrepeatplaybackofatitleorchapter.
1. PressRPT ontheremotecontrolduringplayback.
2. Everytimeyoupressthisbutton,theunitswitchestothefollowingsettings:
Repeat Title –Repeatthecurrentplaybacktitle.
Repeat Chapter –Repeatthecurrentplaybackchapter.
Repeat All –Repeatallfoldersandtracks.
Repeat Off –TurnOFFrepeatfunction.
Searching for particular track using GOTO
YoucanusetheGOTOfunctiontosearchforadesiredtracknumberorparticularpointofatracktoplay.
1. PressGOTO ontheremotecontrolduringplayback.Press buttontoselectTitle/Chapter,Timeserachappears.
2.
EnterTitle/Chapterforcurrentlyplaybackdisc.pressentertoconrm.
3. Ifyouwanttosearchbytime,enterthetime,minuteandsecondthenpressentertoconrm.
Changing audio language during playback (Multi-audio)
DVDscanprovideaudioplaybackwithdifferentlanguagesanddifferentsystems(DolbyDigital...etc.).WithDVDsfeaturingmulti-
audiorecordings,youcanswitchbetweenlanguages/audiosystemsduringplayback.
VCDcanprovidedifferentaudiolanguagesusuallydividedintoleftandrightchannels.
1.Tochoosedifferentaudio,simplypressAudio ontheremotecontrolrepeatedlyduringplayback.
Note:
• With some DVDs, switching between languages/audio systems may only be possible using a menu display.
• You can also switch between languages/audio systems using SET-UP MENU or tap the screen then press Audio
EN-11
Changing the subtitle language during playback (Multi-subtitle)
WithDVDsfeaturingmulti-subtitlerecordings,youcanswitchbetweensubtitlelanguagesduringplayback.
1. PressSub-T ontheremotecontrolduringplayback.Pressrepeatedlyuntilthesupporteddesiredsubtitleappears.
Note:
• With some DVDs, switching between subtitles may only be possible using a menu display.
• You can also switch between subtitles using SET-UP MENU or tap the screen then press Subtitle.
Changing the viewing angle during playback (Multi-angle) – (DVD only)
WithDVDsfeaturingmulti-angle(scenesshotfrommultipleangles)recordings,youcanswitchamongviewinganglesduringplay-
back.
1.PressandholdAngle ontheremotecontrolduringplaybackofascene.PressAnglerepeatedlytoselectthedesiredangletoplay.
Title (DVD only)
DuringDVDplayback,PressandholdTitleonremotecontroltoreturntoFIRSTtitle.
Return to Root Menu (DVD only)
DuringDVDplayback,pressandholdMenuonremotecontroltoreturntorootmenu.
Note: Some DVD may not contain root menu.
Slow motion playback
Thisfeatureletsyouslowdownplayback.
1.PressSlow ontheremotecontrolduringplayback.
2.Pressingitrepeatedlywillswitchyoutothefollowingsteps:1/2-1/3-1/4-1/5-1/6-1/7.
Note:
• To resume normal playback, press PLAY/PAUSE ( ).
• There is no sound during slow motion playback.
• With some disc, slow motion may be unclear during slow motion playback.
Zooming in During Playback
Youcanzoominintothepictureduringplayback.
1. PressandholdZoomontheremotecontrolduringplayback.
2. Everytimeyoupressthisbutton,theunitwillzoom2-3-4-1/2-1/3-1/4timesandOFF.
STEP (Frame by frame playback)
Thisletsyoumoveaheadoneframeatatimeduringplayback.
1. Eachtimeyoupressstepbuttononremotecontrol,youmoveaheadonframe.Toreturntonormalplayback,press button.
PAL / NTSC (P/N)
PressandholdP/N buttontoswitchbetweenPAL,NTSCsystem.
Return / Go Back
PressMenuonremotecontroltogobackonelevelorreturntopreviousmenu.
BLUETOOTH IN AUDIO STREAMING
1. Turn on Bluetooth feature of your mobile phone. Perform “Add Bluetooth device” from your mobile phone. The mobile will
searchforanyBluetoothdeviceswithintherange.Select“iRV6500”andenterPasskey:“0000”toconnect.(Pleaserefertothe
instructionmanualofyourmobilephoneforBluetoothPairing).
2. Aftersuccessfulpairing,connecttheBluetoothfunctionofyourmobilewiththecarstereo.ABluetoothlogowillappearontopof
phonemenuscreenandcarstereoLCDdisplay.
3. Ifyourphoneis“A2DP”formatcompatible,thenyoucanplaymusicinyourmobileandthesoundwillbetransferredtocarhead
unit.Playthemusicthroughyourmobilemusicplayersoftware.
4. Press toplayback
5. Press /onheadunittoplayprevious/nextsongstoredinmobile.
Stopping Playback
1. Press buttonforpause,pressagainforresumeplayback
2. PressAS/PSbuttonduringplaybacktostopplayback.Thatpositionisstoredinmemory.
3. Press tocontinueplayback.
4. PressandholdAS/PSbuttontodisconnectBluetoothmode.
CUSTOMIZING AUDIO SETTINGS
1. PressSELknobtoenterAUDIOsetup.Selecteditemwillbehighlighted.Thefollowingsettingsareavailable:
VOL-Volume(from0to50)
BAS-Bass(from-10to10)
TRB-Treble(from-10to10)
BAL-Balance(sounddistributionbetweentherightandleftspeakers),
fromL=Rto10LandfromL=Rto10R)
FAD-Fader(sounddistributionbetweenthefrontandrearspeakers),
fromF=Rto10FandfromF=Rto10R)
2. RotateVOLknobtomakeadjustments.
3. PressVOLknobtoexitsettings.
TECHNICAL SPECIFICATIONS
CD/MP3/WMA PLAYER SECTION
SignaltoNoiseRatio >60dB
ChannelSeparation >50dB(1kHz)
FrequencyResponse 20Hz-20kHz
TUNER FM
FrequencyRange 87.5-107.9MHz(U.S.Aarea)
ChannelStep 200kHz
FrequencyRange 87.5-108MHz(Europearea)
ChannelStep 50kHz
Sensitivity 2.8µV
StereoSeparation 30dB
SignaltoNoiseRatio 50dB
TUNER AM
FrequencyRange 530-1710KHz(U.S.Aarea)
522-1620KHz(Europearea)
UsableSensitivity 32dB
LINE-OUT
Output 2V
Impedance 10kOhm
GENERAL
PowerSupply 12VDC(10.8-15.6Vallowable)
SpeakerImpedance 4or8ohm
Outputpower 45Wx6CH
Fuse 15A
Note: Specicationandthedesignaresubjecttopossiblemodicationwithoutnoticeduetoimprovements.
SETTING THE DVD PLAYER
Youcanexiblycustomizetheunittosuityourpreference.Youcansetthelanguageandothervideoandaudiosettingssowhen
playbackstartsitwillalwaysuseyourpreferredsettings.
Important:
1. Playanyvideolebeforeyoucanaccessthesetup.
2. PressSetup ontheremotecontrol.
3. Used , , , toselectDVDtoreturn/entersetupcategory.
Settings
SystemSetup
LanguageSetup
Category
TVSystem
TVType
Password
Rating
Default
OSDLanguage
AudioLanguage
SubtitleLanguage
MenuLanguage
Options
NTSC,PAL
4:3PS,4:3LB,16:9
Setuppassword
Setupratinglevel
Restoretofactorysettings
Selectpreferredoptionsappearonscreen
Setting Rating Password
1 Press Setupontheremotecontrol.
2 UsingNavigationkeysselectSystem Setup > Password andpressEnter.
3 Enterthedefaultpassword‘0000’andpressEntertounlockrstandthenenternew4digitpasswordandpressEnter.Theunlock
logowillswitchtolockindicatingpasswordhasbeenset.
Note:
- The default password is ‘0000’.
- In case you forgot your password, you can use the master password ‘0000’ to unlock and reset the password.
- Master password will only work while SETUP button is press during playback.
Other manuals for iRV6500BT
1
Table of contents
