iSecus D210 User manual

Wi-Fi
Door/Window Sensor
USER GUIDE
Click to view more
2019.6.25 14:07 Temper
2:09 PM
Door sensor 1
20%
87%

1
Meet Your Sensor
This smart Wi-Fi door and window sensor monitors the
state of itself. When door & window is opened or closed,
battery is in low voltage or the case is removed from the
base, alarm notification will be sent to your phone,
viewing the state of the sensor on your APP, so you’ll
know that someone is coming in or out your home.
Features
Working in 2.4G Wi-Fi network.
Support Easy or AP mode for Wi-Fi connection.
Send notification about sensor state, battery level or
tampered event.
Open/Close history record.
Specifications
Power Supply: DC 3V (LR03 AAA Battery x2)
Standby Current: <2uA
Alarm Current: <100mA
Wi-Fi Frequency: 2.4GHz
Wi-Fi: IEEE802.11b/g/n
Low Battery Alarm: 2.4V
What You Need
To set up and use door sensor, you’ll need an iPhone or
Android phone, the Smart App, a Wi-Fi 802.11
b/g/n(2.4GHz) network connection.

2
In The Box
Door/Window Sensor
Senses when a door or window is
opened.
Extra Adhesive
Mounting Strips
For door/window installation
User Guide

3
At a Glance
LED Indicator
Lights up when door/window is
opened. And blinks in case of
low battery, please replace the
battery soon.
Open-close magnet
Works with sensor to sense
when a door or window is
opened or closed.
Setting Button
Using for Wi-Fi connection
Tamper switch
Once the sensor is removed,
an alarm notification will be
sent to your mobile.
Power on/off
Push it to left ON to power up
the sensor.
Battery receptacle
Contains 2xAAA battery 3V
Inside view
Top view
Bottom view

4
Mounting strips
Attaches sensor and magnet to
a flat surface.
Where to Place Door/Window Sensor
The magnet should be aligned with
the middle of sensor and placed
within 0.79 inches (2.0 cm) of
sensor when the door or window is
closed, as shown in the image left.
On a door
On a window
INCORRECT
CORRECT
0.79 inches (2.0mm) max

5
Indicator
APP
Download App
Scan the QR code or search “Smart Life” from
GooglePlay/APP Store via a smart phone to download
and install the application.
What You See
What It Means
LED Light is on for 2 seconds
(blinking in case of low
battery)
Door is opened
Door is closed
Tamper alarm
LED light rapidly blinks
continuously
SmartLink
configuration
LED light slowly blinks
continuously
Soft AP
configuration
LED light is on for 10 seconds
Connection to
internet is
successful.

6
Log In/Out
1. If you have not registered an account yet, please tap
“Register” on the app and follow the instructions to
create your account first.
2. If you do not receive an account verification code in
your email box during the registration process, please
remember to check your spam/junk folder.
3. Once you have an account with us, please enter your
email address or phone number and password to log
in.
Adding Device
Wi-Fi Network Configuration
1. Run “Smart Life” APP.
2. Register and login.

7
SmartLink Configuration
(Easy Mode)
Connecting your sensor to Wi-Fi network via SmartLink
mode:
1. Open the Smart Life APP, tap “Add Device” button on
your smartphone.
2. Choose “Security & Sensor” from “Add
Manually”column on the left, then tap Door/Window
Sensor icon .
3. Power on the device. Press and hold the setting button
until the LED indicator rapidly blinks. The device is in
easy mode.
4. Tap “Confirm indicator rapidly blink”, choose the
local Wi-Fi and enter the password, tap “Confirm to
start configuration”.
5. This configuration process should take about 15
seconds.
6. You’ll find your device on home page when the network
is connected.
7. Pick the device, now you can get the sensor state.

8
Soft AP configuration
Please change to “Soft AP mode” if the configuration
fails in “SmartLink” mode.
1. Press and hold the setting button again until the LED
indicator blinks slowly. The device is in AP mode.
2. Tap “AP Mode” on the upper right , then tap “Confirm
indicator slowly blink”
3. Choose the local 2.4G Wi-Fi and enter the password.
Tap “Confirm”, choose Wi-Fi hot spot named
“SmartLife-xxx” then go back to Smart Life APP.
4. You’ll find your device on home page when the network
is connected.
5. Pick the device, now you can get the sensor state.

9
Sharing Device
Sharing your device to your family.
1. Choose the device you want to share on Home page,
tap on the upper corner.
2. Choose “Share Device” to add an account (Mobile
phone/Email) to share it.

10
Notifications
What Happens
Which Notification You Get
Door/Window
Open
The door/window is opened.
Door/Window
Close
The door/window is closed.
Sensor Case
Removed
The sensor is removed from its
base.
Battery Level
Dipped Below 2.4v
The battery is low, replace the
battery soon.

11
How to replace the battery
You should replace the battery soon when you open or
close your door/window with the indicator of sensor blinks
rapidly.
Note: the sensor uses two AAA batteries (LR03), which
can be purchased at your local retailer.
Please gently slide the sensor up
and remove it, then put the new
battery in the receptacle.
After the battery has been replaced,
please put the sensor over the
bottom cover and gently slide down
to install it.