iSi Soda Siphon User manual

Soda
Siphon
Stainless
Steel.
Instructions for Use / Gebrauchsanleitung /
Notice d’utilisation/ Istruzioni per l’uso /
Modo de empleo / Handleiding / Bruksanvisning /
Instruções de uso / Οδηγίες χρήσης / Инструкция
по эксплуатации / Instrukcja użytkowania /
Návod k použití / Használati útmutató / Upute
za uporabu / Navodila za uporabo / Kullanma
talimatı /  / 설명 / 使用说明书 /


1.
3.
Instructions for Use.
Gebrauchsanleitung / Notice d’utilisation /
Istruzioni per l’uso / Modo de empleo /
Handleiding / Bruksanvisning / Instruções
de uso / Οδηγίες χρήσης /Инструкция по
эксплуатации / Instrukcja użytkowania /
Návod k použití / Használati útmutató /
Upute za uporabu / Navodila za uporabo /
Kullanma talimatı /  / 설명 /
使用说明书 /
2.
4.
5.

6. 7.
9. 10.
> 5×
8.

1.
2.
3.
2.
Cleaning.
Reinigung / Nettoyage / Pulizia / Limpieza /
Reiniging / Rengöring / Limpeza / Καθαρισμός /
Очистка / Czyszczenie / Čištění / Tisztítás /
Čišćenje / Čiščenje / Temizlik /  / 세척 /
清洁 / 

2421…
2002…
2342...
2412…
2403…
Expanded Drawing.
Explosionszeichnung / Vue éclatée /
Esploso / Vista detallada / Opengewerkte
tekening / Sprängskiss / Vista explodida /
Αναπτυγμένο διάγραμμα /Покомпонентное
изображение / Rysunek rozłożeniowy /
Rozložený výkres /Robbantott ábra / Znak
za opasnost od eksplozije / Eksplozijska
risba / Parça şeması /  /
폭발성 표시 / 分解图 /  

Pure.
Life.
Taste.

EN
English
2
DE
Deutsch
14
FR
Français
24
IT
Italiano
30
ES
Español
36
NL
Nederlands
42
SE
Svenska
48
PT
Português
54
EL
εηνικά
60
RU
Русский
66
PL
Polski
72
CZ
Čeština
78
HU
Magyar
84
HR
Hratski
90
SI
Slovenski
96
TR
Türkçe
102
AR

108
KO
한국어" 한국어
114
ZH
中文
120
TH

126

2
EN
Thank you for
choosing an iSi
product.
Please read the Siphon instructions
carefully before first-time use.

3
Discover the
world of iSi:
Visit the iSi website and learn
more about our extensive range of
products: Our comprehensive collec-
tion of recipes from simply yummy to
creatively sophisticated combinations
offers you access to the entire culinary
world of iSi. Let yourself be inspired!
The iSi website provides detailed
product information about all iSi
Whippers/Siphons and iSi Accessories.
The detailed online instructions
provide information about first-time
use, cleaning, and troubleshooting iSi
Whippers and Siphons.
www.isi.com/culinary
www.isi.com/us/culinary
If you have any further questions please
contact [e-mail]
For the US: [e-mail]
EN

4
Guaranteed quality:
Every iSi Whipper and Siphon is thoroughly
inspected before leaving the factory. iSi offers
a two-year warranty for materials and machin-
ing, as long as faults are not determined to be
the result of improper use. The warranty is ef-
fective from the date on the purchase receipt.
Register online now and we will extend your
warranty!
Enjoy the benefits of a three-year warranty
for materials and machining.
The warranty is only valid when original whipper
parts from iSi are used, as given in the list of
product components. The perfect function of
your Whipper/Siphon can only be guaranteed
if you exclusively use iSi chargers with it. No
warranty or liability claim will be upheld for
faults, damage, or consequential damage
particularly determined to be the result of
non-compliance and/or ignorance of the user
instructions and the safety information therein.
FOR U.S. ONLY:
Limited warranty, Limitations and Warning:
iSi products are thoroughly tested before they
leave the factory, and iSi warrants for a period
of two years that its products are free from
defects in materials and workmanship and, if
used only with other iSi products, will function
as intended. iSi’s liability in the event of a prod-
uct’s failure to meet this warranty is limited to
repair or replacement of the product or, at iSi’s
option or if iSi is unable to deliver a replacement
product, to refund the purchase price. In no
event, however, shall iSi be liable for incidental
or consequential damages. Any implied war-
ranties are limited to the terms of the express
warranties, including the two-year duration.
iSi siphons and chargers are designed and engi-
neered to function together as a system and
involve gas under pressure. All iSi products and
parts bear the iSi logo; iSi recommends that only
iSi parts and products be used with iSi products,
including that only iSi chargers be used with iSi
Whippers/Siphons and that iSi chargers be used
only in iSi Whippers/Siphons. Failure to follow
this recommendation or any failure to follow

5
the instructions for use and care of the prod-
ucts invalidates this warranty and all implied
warranties in their entirety as to any conse-
quences of such failure.
WARNING: In addition, failure to follow this
recommendation or any of the instructions for
use and care constitutes misuse of iSi products
and could result in malfunction of the system
and possible personal injury and/or property
damage. In the event of any personal injury,
you should promptly seek appropriate medical
attention.
EN
Simply register online and take
advantage of the extended benefits:
www.isi.com/warranty

6
Siphon Data.
Max. operating
pressure PS
16 bar / 232 psi
Min. operating
temperature
1 °C / 34 °F
Max. operating
temperature
30 °C / 86 °F
Max. filling volume ~ 1 L / 1 US quart
Max. number of
chargers to be used
1 iSi soda charger
How to Use For refreshing,
sparkling soda
water.
Not approved for
commercial use.
Material List.
Description Material
Bottle Stainless steel
Head PA, nickel-plated
ABS, POM, silicone,
NBR, PU, nickel-
plated brass,
stainless steel
Riser tube/Gasket PE, TPE
Measuring tube PP, NBR
Measuring tube key ABS
Charger holder PA, TPE
Technical data is subject to change without
prior notice.

7
Safety Information.
Failure to follow this safety instructions or any
recommendation for use and care constitutes
misuse of iSi products and could result in mal-
function of the system and possible personal
injury and/or property damage.
——— Do not exceed minimum or maximum
pressure, minimum or maximum tempera-
ture, maximum filling volume, number of
chargers or usage of the iSi Siphon shown
in the Siphon Data! Do not use for any pur-
poses not indicated in these instructions!
——— Please read the instructions for use care-
fully to avoid operating errors and keep a
copy on hand!
——— Do not use force when screwing on or off
the head, using the siphon and during any
operation described in these instructions!
——— Store the iSi Siphon out of the reach
of children!
——— Only charge a siphon that is filled!
——— Never store or use the iSi Siphon outside of
the min. and max. operating temperatures.
Do not store in a freezer!
——— Only use a head and bottle of the same
siphon type together!
——— Never combine iSi components with
components from another brand or
manufacturer!
——— The head and the charger holder should
always be screwed on straight and com-
pletely tight, never crooked or incomplete-
ly tightened!
——— Only use original iSi soda chargers!
EN

8
——— When screwing on the charger, do so away
from others and keep face away from the
siphon; do not bend over the siphon!
——— The siphon is a pressurized bottle. If it
is dropped or damaged (e.g., cracked or
dented), it should not be used again
because it poses a risk of injury. Please
have the siphon checked by the iSi
service center!
——— Never unscrew the head when the siphon
is pressurized!
——— Never use the lever as a carrying handle!
——— Only dismantle the iSi Siphon for cleaning
in accordance with the illustration!
——— Only clean by hand using lukewarm water
and domestic hand dishwashing detergent.
The iSi Siphon is not dishwasher safe!
Cleaning the head of the siphon in the
dishwasher may damage the plastic head
and the charger holder, which ultimately
puts your safety when using your iSi Siphon
at risk!
——— Do not make any modifications to the iSi
Siphon. This will void the warranty and
exempt the company from any liability!
——— Never use more chargers than specified
and never overfill the siphon. This will
ensure that the specified maximum oper-
ating pressure is not exceeded!
——— If the pressure will not release, please
contact iSi or your service center!
NOTE: Before using the iSi Siphon for the first
time, carry out thorough cleaning as shown in
the Cleaning illustration.
Siphon Instructions.
NOTE: Please observe the illustrations in the
siphon instructions!
If the water is cold when poured in and the
siphon is kept in a cool place, then the soda
water will be particularly fizzy. Keep filled
soda siphon in the refrigerator.

9
Preparation
NOTE: If the bottle has been out of use for a long
period of time, rinse it with warm water (max.
50°C/122°F) before use. Push the lever several
times to check the siphon's function.
1. Push the measuring tube into the bottle until
it stops.
NOTE: Never fill the bottle without the
measuring tube.
Filling
2. Hold the bottle upright and fill with cold
water until the water spills out of the
measuring tube.
NOTE: Do not try to add more water by tilting or
shaking the bottle.
NOTE: Fill the iSi Siphon with water only. Do not
add extra ingredients.
Equipment Setup
3. Insert the riser tube with gasket into the
bottle through the measuring tube.
4. Screw the head onto the bottle so that it
is straight and tighten by hand.
5. Insert 1 iSi soda charger into the charger
holder.
6. Screw the charger holder with the inserted
iSi soda charger onto the head until you can
hear that all of the charger contents have
flowed into the siphon.
WARNING The siphon is now pressurized!
7. Shake the siphon vigorously at least 5 times.
8. Unscrew the charger holder and recycle the
empty iSi soda charger.
NOTE: A slight hiss may be heard when
removing the charger holder. This is normal.
9. Screw the cap onto the threads.
EN

10
Operation
10.Gently press the lever to remove the soda
water. Direct the stream toward the internal
wall of the drinking glass.
NOTE: If necessary, shake the Soda Siphon again
to achieve optimum use.
Cleaning.
NOTE: Please observe the illustrations on
cleaning!
1. Activate the lever until the siphon is
completely empty and there is no pressure
left. Unscrew the head from the siphon.
2. Remove the riser tube and measuring tube
as shown in the illustration.
3. Rinse the product components with clear,
potable water (max. 50°C/122°F) only.
NOTE: Never use scouring agents, abrasive
sponges/brushes, or sharp objects to clean the
siphon.
NOTE: Do not put in the dishwasher and do not
wash in boiling water.
Storage.
If the iSi Siphon is not going to be filled again
immediately, leave the components to air dry
in a clean place and store the iSi Siphon in a
dismantled condition with the measuring tube
inserted. For best results, when not in use, do
not store the siphon with the head screwed on.

11
Troubleshooting.
Release the pressure
Place the siphon upright in a sink and gently
operate the lever until the pressure is gone from
the iSi Siphon. Now the head can be removed
from the bottle.
If the pressure will not release, please contact
iSi or your service center.
Soda charger will not puncture.
1. The charger being used is not suitable.
——— Only use original iSi soda chargers.
2. The charger was inserted backwards.
——— Insert the iSi soda charger correctly
(see diagram: Instructions for Use).
3. The puncturing unit has been damaged.
——— Send the siphon to iSi or a service center.
Water does not contain any CO2or hardly
any at all.
1. The siphon was not shaken enough.
——— After screwing on the iSi soda charger,
shake the siphon vigorously several
times (at least 5 times).
2. The water is not cold enough.
——— The colder the water, the more CO2
it can absorb. For the best results we
recommend keeping the filled Soda
Siphon in the refrigerator.
3. No pressure/not enough pressure in the
device.
——— Only use original iSi soda chargers.
——— Do not reuse empty chargers. They
should be recycled.
During operation, water and gas are leaking
through the outlet — pressure-relief valve is
engaged.
1. The siphon was overfilled.
——— "Release the pressure" and refill the
siphon.
——— Observe the maximum filling amounts.
Ensure the measuring tube is fully
inserted before filling.
EN

12
2. Too many chargers were used.
——— Pay attention to the maximum number
of iSi soda chargers to be used indicated
in the Siphon Data.
During operation, gas is leaking between the
bottle and the head.
1. The head was not tightened securely.
——— Tighten the head onto the bottle
by hand as per the instructions.
2. Riser tube with gasket was not used.
——— "Release the pressure" and insert the
riser tube in the bottle.
3. The gasket has been damaged.
——— "Release the pressure." The riser tube
with gasket needs to be replaced and
is available as an original iSi spare part.
4. The bottle has been damaged on the upper
edge.
——— "Release the pressure." Send the siphon
to iSi or a service center.
Service.
Replacement parts are available individually
and at an affordable price.
See your specialist dealer for the availability of
replacement parts. In Austria, you can also get
in contact via [e-mail]. In the US contact
[e-mail]
Only send in the complete siphon for repairs.
Replacement parts can be seen in greater detail
on the expanded drawing.

13
EN

14
DE
Vielen Dank,
dass Sie sich für
ein iSi Gerät
entschieden haben.
Bitte lesen Sie sich die
Gebrauchsanleitung vor der
ersten Inbetriebnahme
sorgfältig durch.