islandspring IS-HEAT-LED Assembly instructions

Operating & Safety Instructions
LED Bluetooth Outdoor Heater
IS-HEAT-LED
Please keep this instruction for future reference
The picture is for reference only. Please adhere to the original products
INSTRUCTION
【MULTI-FUNCTION ELECTRIC HEATER】
24052D-MUSIC
IS-HEAT-LED
LED Bluetooth Outdoor Heater
Please keep this instruction for future reference.
The picture is for reference only. Please adhere to the original products.

- 2 -
IS-HEAT-LED
Operating & Safety Instructions
LED Bluetooth Outdoor Heater
IS-HEAT-LED
This manual contains important safety information
concerning the maintenance, use and operation of
this product. Failure to follow the instructions contained
in this manual may result in serious injury. Do not
operate this product unless you have read and
understand the contents of this manual.
IMPORTANT SAFETY MEASURES
When using any kind of electrical appliance, some basic
safety precautions must always be followed,
including the following:
1) To avoid possible electric shocks, do not place the
cable, plug or appliance in water or in any
other liquid. Do not insert screwdrivers or metallic
items inside the appliance.
2) If the power cable is damaged, it must be replaced by
the manufacturer, its service technician or by someone
else authorized by the manufacturer.
3) Any changes by a non authorised person will void the
guarantee.
4) Do not use appliances if they are damaged.
5) To disconnect electrical appliances, wait until the
heater stops and then unplug the cable from the
electric socket.
6) Do not leave appliances working unattended. Ensure
that the heater has come to a complete stop before
dismantling appliances. Unplug appliance after each
use.
7) Do not allow children to use electrical appliance. Do
not leave appliance unattended when in use close to
children.
8) This item should only be operated by an adult.
Children of less than 11 years should be kept away
unless continuously supervised.
9) Do not dispose of this product as unclassied
municipal rubbish. Due to the use of electrical
and electric parts, this product must be collected
separately.
10) CAUTION — Some parts of this product can become
very hot and cause burns. Particular attention has to
be given where children and vulnerable people are
present.
11) WARNING: The appliance shall, under no
circumstances, be covered with insulating material or
similar material.
12) The heater must not be located immediately below a
socket-outlet.
NOTICE
1) The power supplied to this unit must comply with
electrical requirement on its label. Damage or re may
result if the incorrect power used.
2) Do not use the heater anywhere with ammable
objects, gas, dust.
3) In order to avoid scalding, never touch the heater
whilst it is on.
4) Never place anything on the product surface when it is
working.
5) To avoid possible electric shocks, do not place the
heater in bathrooms or similar indoor location.
6) In order to avoid re, do not use the heater with
automatic electried sequencer, timer and
other devices.
7) Turn o all switches and unplug the heater if an
emergency situation occurs.
8) Please contact with seller if it does not work properly.
Do not try to repair the heater by yourself.
9) Please contact the seller if you nd other problems not
covered in this operation manual.
10) Cleaning and user maintenance shall only be by
an adult.
SPECIFICATION
Model: IS-HEAT-LED
Remote: Yes for B.T & light
Voltage: 220-240V~50-60Hz
Power: 0/1500W
Weight: 6 kg
Size: 28 x 28 x 135cm
Parts Description Quantity
A Heater 1
B Manual 1
C Remote 1

- 3 -
IS-HEAT-LED
Operating & Safety Instructions
LED Bluetooth Outdoor Heater
IS-HEAT-LED
To operate the unit, ensure that the
unit is plugged in to the correct power
supply.
Heating
- To turn the 1500W heat setting on,
press the switch marked •
- To turn the heat setting o, simply
press the same switch marked •
Light and Bluetooth Function
- To enable the Bluetooth and light
settings, press the switch marked ••
- The remote control will operate the
light settings (see diagram for uses). ••
- If you require Bluetooth only, then you
must use the remote control to turn
the light o.
CLEANING AND MAINTENANCE
1) Always turn o and unplug the heater before cleaning.
2) To clean the heater, use a damp cloth and make sure
to dry excess water once cleaned.
*ATTENTION Do not put the heater directly into any
container with water in it.
To comply with European Directive
2002/96/EC concerning old electric
and electronic equipment and its
implementation in national laws, old
electric tools have to be separated
from other waste and disposed of in an
environment-friendly fashion, e.g. by
taking to a recycling depot.
TROUBLE SHOOTING
1) If the heater does not emit heat after turning on, please
check the power cord is plugged into electric socket
properly.
2) In rst use, it is normal if the heater emits a small
amount of smoke and some smell because of the
evaporation of the protective oil.