Table 1. Revision history
1.2 Safety Rules
Note: Incorrect wiring of this product can damage it and lead to other hazards. Make sure
the product has been correctly wired before turning the power ON.
•Before wiring, or removing/mounting the product, be sure to turn the power OFF. Failure
to do so might cause an electric shock.
•Do not touch electrically charged parts such as the power terminals. Doing so might
cause an electric shock.
•Do not disassemble the product. Doing so might cause an electric shock or faulty
operation.
•Use the product within the operating ranges recommended in the specification
(temperature, humidity, voltage, shock, mounting direction, atmosphere, etc.). Failure to
do so might cause a fire or faulty operation.
•Do not place the monitor on an unstable surface.
•Do not expose the monitor directly to sunlight or other heat sources.
•Unplug the power cable during a thunderstorm with lightning.
•Do not entwine or step on the power cord.
•Do not overload the wall socket.
•Clean the monitor with a dry, soft, lint free fabric.
•Do not expose the device to inappropriate temperatures, solvents, acid, water, or
moisture.
•Avoid fragmentation or any other physical damage to the product or its components
(such as shell, LCD/LED panel, port, circuits, etc.) that may be caused by insects or
animals and may in effect lead to a resulting damage such as corrosion or moisture
contamination.
•Do not install, repair, add, or alter the product by an unauthorized agent or person.
•Install the device under the guidance of the professional in a proper manner – wall-
mounted or hanging from the ceiling.
•Unplug the power cable if the monitor is not used for a long time.
