Isotra VERANDA HRV08-ZIP User manual

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
1
VERANDA HRV08-ZIP
1. WARNINGS
Installation of Veranda HRV08-ZIP must be carried out by qualified personnel in compliance with EN a local safety
regulations relative to domestic electrical systems.
Before you start, please do read these instructions thoroughly.
The tightening of springs creates important powers. Be very careful and make sure of a solid footing whilst operating.
Provide sufficent light in the fitting area. Dispose of obstacles and dirt. Make sure that, except for the fitters, no other
people are in the fitting area. Unauthorized people might be in the way or at risk themselves.
This symbol indicates the possibility of injury to persons or damage to the product.
This symbol means „Warning“.
This symbol means to use force during the shown operation.
Using electric screwdrivers set the correct torque value.
This symbol means the need of a visual control.
This symbol indicate a particular which is given as optional.
The manufacturer accepts no liability for any inaccuracies or printing errors that may be contained in this manual. The
manufacturer reserves the right to introduce any modifications to the product that are considered necessary or in the
interests of the user and which do not alter the essential operational and safety characteristics of the appliance. No
modification of the design or configuration without consulting the manufacturer. The instruction of use shall be provided to
the end user.

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
2
2. LIST OF REQUIREMENTS
3. ASSEMBLY

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
3

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
4

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
5

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
6

MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 3. 2018
7
TÁHNOU T