Itek ITMC32V241FHD User manual

ITMC32V241FHD User Manual
Table Of Contents
1. Safety Precautions
2. Maintenance Guidelines
3. Box Contents
4. Product Overview
5. Stand lnstallation
6. Mount Installation
7. Connectivity Options
8. Basic Operation
9. Indicator Light
10. OSD
11. ECO Modes and Gameplus Switching
12. Technical Specifications
For more inf ormation please visit our web sit e or writ e us an email:
htt ps:// www.itekevo.com
[e-mail]

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
Eng-1
1. Safety Precautions
WARNING:Safety Instructions
Do not place the monitor in rain,humid environment or open the monitor case to avoid
any shock, electrical hazards,and/or mechanical hazards.
Operation
• Keep the monitor out of direct sunlight and away from stoves or any other heat
source.
• Keep the monitor out of water source.
• Remove any object that could fall into ventilation holes or prevent proper
cooling of the monitor’s electronics.
• Do not block the ventilation holes.
• Do not knock or drop the monitor during operation or transportation.
• To clean your screen, slightly dampen a soft, clean cloth with water, If possible,
use a special screen-cleaning tissue or solution. Do not use benzene, thinner,
ammonia, abrasive cleaners, or compressed air.
• Use a slightly dampened, warm cloth to clean the frame. Avoid using detergent
of any kind as some detergents might leave a milky film on the plastics.
• Unplug the monitor if you are not going to use it for an extended period of time.
• To avoid the risk of shock or permanent damage to the set, do not expose the
monitor to dust, rain, water, or excessive moisture environment. If your monitor
gets wet, wipe it with dry cloth as soon as possible.
Caring For Your Monitor
Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
CAUTION
2. Maintenance Guidelines

Eng-2
ITMC32V241FHD User Manual
Table Of Contents
1. Safety Precautions
2. Maintenance Guidelines
3. Box Contents
4. Product Overview
5. Stand lnstallation
6. Mount Installation
7. Connectivity Options
8. Basic Operation
9. Indicator Light
10. OSD
11. ECO Modes and Gameplus Switching
12. Technical Specifications
For mor e inf orma tio n ple ase visit o ur web site o r wr ite u s an e mail:
http s://www. itekevo. com
info@it ekevo.com
3. Box Contents
Power Cable x 1 User Manual x 1
DP Cable x 1
Stand Base x 1Monitor x 1 Stand Bracket x 1
Screw Bolts
PM4*12 x 4
(for Stand lnstallation)
Screw Bolts
PM4*16 x 4
(for Wall Mounting)
Screw Bolts
KM4*12 x3
(for Stand lnstallation)
VESA Connector Up x 1 VESA Connector Down x 1

Eng-3
4.1–Monitor Buttons
1 M Menu Button
2
3
Down Button
: Press to display the OSD menu or enter sub-menus.
: Press to move down in the menus.
: Press to move up in the menus.
: Press to exit.
: Press to turn the monitor on/off.
Up Button
4 E Exit Button
5 Power Button
6 LED Indicator : Changes colour according to status.
4.2– Monintor Ports
4. Product Overview
Power Connector: Insert the power cable to supply power to the monitor.
HDMI Connectors: Insert one end of the HDMl cable into the computer's
HDMl output and connect the other end to the monitor's HDMI port.
DP Connector: lnsert one end of the DP cable into the computer's DP
output andconnect the other end to the monitor's DP port.
Audio Output: Insert the audio cable for output of audio signals.

1. Open the package, take out the product out with the protective foam still attached
and gently lay it flat on a desk or table. Remove the extra parts and the foam
covering the back of the monitor. Then press the button to remove the stand plate.
2. Use a screwdriver (not included) and three PM4*12 screws to fix the base to the
stem, and then use two KM4*12 screws to fix the bracket plate to the stem.
3. Use the base bracket assembly assembled in step 2 to align the machine slot and
buckle down. (note: press and hold the quick release button with your fingers to
take out the base bracket assembly)
Make sure the monitor is laid on a flat surface before removing the stand.
Eng-4
5. Stand Installation

This monitor only includes screws which may be used when attaching the monitor to
a VESA 75*75mm type mount. No VESA mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it
on a desktop or table. Remove the extra parts and the foam covering the back of the
monitor. Press the release button to remove the stand plate. lf the monitor was
already attached to the stand, remove the stand.
2. Remove the original screws ( ) from the opening in the back of the monitor. Then
use the 4pcs PM4*16 screws to attach the adapters inside the opening.
3. Your monitor is now ready to be attached to a wall-mounting bracket. To avoid
damage, please do not pinch the screen during bracket installation.
●Do not discard the original screws.
●Use only the 4pcs PM4*16 screws ( ) provided. You MUST follow the instructions
below for secure installation.
Eng-5
6. Mount Installation

7.2- Connecting Your Earphones
Plug in your earphones to receive audio signals from your monitor.
Exposure to loud audio for prolonged periods of time may permanently
damage your hearing.
Earphones (not included)
Power Cable
Connect the included power cable to the power connector, and then plug the other
end into an wall outlet.
7.1- Connecting the Power Cable
Eng-6
7. Connectivity Options

7.3- HDMI Connectivity
7.4- DP Connectivity
For the monitor to receive DP signals from the computer, use the DP cable to
connect the monitor tothe computer.
For the monitor to receive HDMl signals from the computer, use the HDMI cable to
connect the monitor to the computer.
HDMI Cable (not included)
DP Cable (included)
Eng-7

Adaptive-Sync
This feature is off by default. To activate, you must have hardware with Adaptive-Sync capa-
bility, a DP or HDMI cable, and the latest graphic drivers. After connecting your computer and
monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your
computer. If you do not, you may need to enable the function in your graphics card menu.
See your graphics card manufacturer’s documentation for instructions.
1. Insert one end of the DP cable into your PC's graphics card. A HDMl cable may
also be used.
2. Connect the other end of the cable to the corresponding connector on your monitor.
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if
a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn on the monitor.
Eng-8
8. Basic Operation
9. Indicator Light
Connettore DP
Connettore HDMI
lndicator Light
Solid blue light indicates power is on and the monitor is operating normally.Flashing blue light-
indicates no video source, no horizontal or vertical signal has been detectde or voltage is low.
Please ensure your computer is on and all video cables are fully inserted and/or connected.

2. Press to enter the OSD menu.
3. Press or to browse functions.
• Highlight the desired function, then press Mto enter the sub-menu.
• Press or to browse sub-menus, then press Mto highlight the desired function.
• Press or to highlight an option, then press Mto confirm the settings and exit
the current screen.
4. Press Eto exit the current screen.
The On-Screen Display(OSD) Menu may be used to adjust your monitor's settings
and appears on screen after turning on the monitor and pressing the Mbutton.
When using the monitor for the first time, settings will automatically adjust to
optimal settings according to your computer's configuration and parts etc.
1. Press any one of the buttons ( ) to activate the navigation window.
Eng-9
eco
10. OSD
DP
Resolution：1920x1080@60Hz
Input Source
Brightness/Contrast
Color Setting
Picture Quality Setting
Display
Audio
Multi-Window
OSD
Other
DP
HDMI 1 (2.0)
HDMI 2 (1.4)
HDMI 3 (1.4)
Windo w1：
Input Source：DP
Resol ution：1920x1080@60Hz
Window2:
InputSource：
Resolution：
DP
Resolution：1920x1080@240Hz
Input Source
Brightness/Contrast
Color Setting
Picture Quality Setting
Display
Audio
Multi-Window
OSD
Other
DP
HDMI 1 (2.0)
HDMI 2 (1.4)
HDMI 3 (1.4)
Windo w1：
Input Source：DP
Resol ution：1920x1080@240Hz
Window2:
InputSource：
Resolution：

Main Menu Sub-Menu Options Description
Input Source
HDMI1(2.0) NONE
NONE
Switch to HDMI1 signal input
DP NONE Switch to DP signal input
Brightness/
Contrast
Brightness 0~100 Adjust display brightness
Blacklevel 0~100 Adjust display black level
Contrast 0~100 Adjust display contrast
DCR On Turn on DCR function
Off Turn off DCR function
Color Setting Gamma Set Gamma add-in1.8
2.0
2.6
Picture Mode Standard, Photo,
Movie, Game,
FPS, RTS
Set visual mode according to activity
Color
Temperature
Warm, Cool, User Select color temperature
Low Blue Light 0~100
Hue 0~100 Adjust hue levels
Saturation 0~100 Adjust saturation levels
Picture
Quality
Setting
Sharpness 0~100 Set display sharpness
Response Time Off, High, Middle,
Low
Adjust response time
Noise
Super
Resolution
Off, High, Middle,
Low
When the resolution of the display
screen is low, this function can be turned
on to enhance the image resolution
Reduction
Off, High, Middle,
Low
Reduce the interference of image noise
caused by signal source interference
Dynamic
Luminous
Control
On, Off Compensate for gray scale display
screen and strengthen the expression of
gray scale
Display Aspect Ratio Wide Screen, 4:3,
1:1, Auto
Select on-screen aspect ratio
Audio Mute On, Off Turn mute mode on/off
Volume 0-100 Adjust audio volume
Audio Source HDMI1, HDM2,
HDM3, DP
Select audio signal input via HDMI or DP
HDMI2(1.4)
HDMI3(1.4) NONE
Switch to HDMI2 signal input
Switch to HDMI3 signal input
MPRT On, Off
Moving picture response time
2.4
2.2
LedMode Flicker, Normal,off Switch LED modes / turn LEDS on/off
Eng-10
10.1-OSD Menu Functions

Main Menu Sub-Menu Options Description
Multi-Window Multi-Window Off, PIP Mode,
PBP 2Win
Select PIP/PBP modes according to the
number of input signals etc.
Sub Win2 Input DP, HDMI1,
HDMI2, HDMI3
Select according to input signal for PIP/
PBP mode
PIP Size Small, Medium,
Large
Adjust the PIP/PBP display window size
PIP Position TopRight, TopLeft,
BottomRight,
BottomLeft
Adjust the PIP/PBP window position
Swap NONE
Normal,90,
180,270
When the user flips the display ,
thisfunction can also flip the OSD
to achievethe best display angle
Swap the two channel signal source of
only the PIP/PBP 2 screens function
OSD Language English, 简体中文，
한국어，Русский,
Español, 日本語,
Français, Italiano
Set OSD language
OSD
H-Position
0-100 Adjust the OSD’s horizontal position
OSD V-Position 0-100 Adjust the OSD’s vertical position
OSD
Transparency
0-100 Set the OSD’s overall transparency
OSD Time Out
OSD Rotation
5-100 Set how long the OSD remains open
after non-use
Other DP Version DP1.1, DP1.2
Adaptive-Sync On, Off Turn the Adaptive-Sync function on/off
Reset None
Eng-11

3. Press button to switch between multiple Picture modes, among which the
standard mode is suitable for most activities.
Eng-12
2. Press button to switch Gameplus modes. According to the needs of your game,
choose the corresponding game icon. These game icons are primarily designed
to optimize your aim during shooting games, though they can be used for other
scenarios.
1. Press any of the buttons ( ) to activate the navigation window.
M, , , E,
eco
Standard
4. Press E to switch color gamut mode between “Limited” and “Full” when optimal
configuration is used.
RGB Range:Full
11. ECO Modes and Gameplus Switching

Eng-13
12. Technical Specifications
Model
Screen Size
Aspect Rstio
Backlight
Brightness
Panel
Resolution
Refresh Rate
Response Time
Viewing Angle
Contrast Ratio
VESA Mounting
Display Colors
Interface
Audio
Speakers
Audio Out
Accessories
Power
DisplayPort Cable
Additional Functions
Low Blue Light
Flicker Free
Physical Dimensions
Dimensions (w/ Stand)
Dimensions (w/o Stand)
Net Weight
Gross Weight
240Hz
712.5*508.4*245.1mm
712.5*422.8*120.6mm
6.99kg
9.04kg
1ms MPRT
3000:1
75*75mm
No
Yes
Yes
Power Cable Yes
Yes
Yes
DP1.2*1, HDMI2.0*1, HDMI1.4*2, Audio out*1
16.7M
31.5"
ITMC32V241FHD
VA
E-LED
Min.250cd/m2Typ.300cd/m2
DP1.2: 1920*1080@240Hz
HDMI1.4: 1920*1080@120Hz
HDMI2.0: 1920*1080@240Hz
178°(H) / 178°(V)
16:9
AC 100-240V~ 50/60Hz 1.5A

ITMC32V241FHD Manuale utente
Sommario
1. Misure di sicurezza
2. Linee guida per la manutenzione
3. Contenuto della scatola
4. Panoramica del prodotto
5. Installazione Stand
6. Installazione del supporto
7. Opzioni di connettività
8. Funzionamento di base
9. lndicatore LED
10. OSD
11. Modalità ECO e Gameplus
12. Specifiche tecniche
Per maggiori informazioni visitate il nostro sito web oppure scrivete una mail:
htt ps:// www.itekevo.com
[e-mail]

I termini HDMI e HDMI High-Definition Multimedia Interface e il logo HDMI sono marchi o
marchi registrati di HDMI Licensing Administrator, Inc. negli Stati Uniti e in altri paesi.
Ita-1
1. Misure di sicurezza
AWISO: lstruzioni di sicurezza
Non posizionare il monitor in presenza di liquidi, umidità o aprire la scocca per evitare
scosse, pericoli elettrici e/o meccanici.
Funzionamento
• Tenere il monitor lontano dalla luce solare diretta e da qualsiasi altra fonte di calore.
• Evitare contatti con liquidi.
• Rimuovere qualsiasi oggetto che potrebbe cadere nei fori di dissipazione o
impedire il raffreddamento corretto della parte elettronica del monitor.
• Non bloccare i fori di ventilazione.
• Non sbattere o far cadere il monitor durante ii funzionamento o il trasporto
• Per pulire lo schermo, inumidire leggermente un panno morbido e pulito con acqua.
Se possibile, utilizzare un tessuto o una soluzione speciale per la pulizia dello
schermo. Non usare benzene, diluenti, ammoniaca, detergenti abrasivi o aria
compressa.
• Utilizzare un panno leggermente inumidito e caldo per pulire il telaio. Evitare di
utilizzare detergenti di qualsiasi tipo poiché alcuni detergenti potrebbero lasciare
una pellicola lattiginosa sulla plastica.
• Scollegare il monitor se non si intende utilizzarlo per un periodo di tempo prolungato.
• Per evitare il rischio di urti o danni permanenti, non esporre il monitor a polvere,
pioggia, acqua o ambiente con umidità eccessiva. Se il monitor si bagna, pulirlo con
un panno asciutto il prima possibile.
Cura del monitor
Prima di pulire il monitor, scollegare il cavo di alimentazione dalla presa elettrica.
Cautela
2. Linee guida per la manutenzione

ITMC32V241FHD Manuale utente
Sommario
1. Misure di sicurezza
2. Linee guida per la manutenzione
3. Contenuto della scatola
4. Panoramica del prodotto
5. Installazione Stand
6. Installazione del supporto
7. Opzioni di connettività
8. Funzionamento di base
9. lndicatore LED
10. OSD
11. Modalità ECO e Gameplus
12. Specifiche tecniche
Permaggiori informazioni visitate il nostro sito web oppure scrivete una mail:
http s://www. itekevo. com
info@it ekevo.co m
Ita-2
Monitor x 1 Stand stelo x 1
Base del supporto x 1
Cavo DP x 1
Cavo di
alimentazione
x 1
Manuale Utente x 1
3. Contenuto della scatola
Viti kM4*12 x 3
(per montaggio dello stand)
Viti PM4*12 x 4
(per montaggio dello stand)
Viti PM4*16 x 4
(per montaggio a parete)
Connettore VESA
superiore x 1
Connettore VESA
inferiore x 1