Itm 5 Series User manual

Series 5
DIGITAL FORCE GAUGES
Quick Start Guide
grips, software, and more.
Mark-10 Corporation
www. .com [e-mail]1.800.561.8187

Thank you!
Thank you for purchasing a Mark-10 Series 5 Digital Force
Gauge. We are condent that you will get many years of service
from this product. Series 5 gauges may be used in a variety of
compression and tension testing applications. Please read
through this Quick Start Guide and the complete User’s Guide
before using the gauge.
Series 5 Digital Force Gauges
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please
review the yellow safety information card included in the box, as well as the
safety information in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
Quick Start Guide
Part No.
Qty. M5-012 –
M5-20
M5-50 –
M5-100
M5-200 –
M5-500
M5-1000 M5-2000 Description
1 12-1049 12-1049 12-1049 12-1049 12-1049 Carrying case
1
AC1030 /
AC1031 /
AC1032 /
AC1035
AC1030 /
AC1031 /
AC1032 /
AC1035
AC1030 /
AC1031 /
AC1032 /
AC1035
AC1030 /
AC1031 /
AC1032 /
AC1035
AC1030 /
AC1031 /
AC1032 /
AC1035
AC adapter w/US,
EU, UK, or AUS
prong
1 08-1026 08-1026 08-1026 08-1026 08-1026
Rechargeable
NiMH battery
(inside gauge)
1 G1024 G1024 G1031 G1031 G1031 Extension rod
1 G1026 G1026 G1033 G1033 G1033 Cone
1 G1025 G1025 G1032 G1032 G1032 Chisel
1 G1027 G1027 G1034 G1034 G1034 V-groove
1 G1029 G1029 G1036 G1036 G1036 Flat
1 G1028 G1038 G1035 G1035 - Hook
1 - G1039 G1037 - - Coupling
1 - - - G1041 G1041 Thread adapter
1-----Certicate of
calibration
1 09-1165 09-1165 09-1165 09-1165 09-1165 USB cable
2
3
www. .com [e-mail]1.800.561.8187

Thank you!
POWER
Quick Start Guide
Press the button to power on the gauge. Press and hold to power o󰀨. The
gauge may be powered either by the internal rechargeable battery or an AC adapter/
charger. The battery will last approximately 7 hours with the backlight turned on,
and 24 hours with the backlight turned o󰀨 before recharging is necessary.
Qty. M5-012 –
M5-20
M5-50 –
M5-100
1 12-1049 12-1049
1
AC1030 /
AC1031 /
AC1032 /
AC1035
AC1030 /
AC1031 /
AC1032 /
AC1035
1 08-1026 08-1026
1 G1024 G1024
1 G1026 G1026
1 G1025 G1025
1 G1027 G1027
1 G1029 G1029
1 G1028 G1038
1 - G1039
1 - - -
1 - - -
1 09-1165 09-1165
2
3
LITERATURE & SOFTWARE DOWNLOADS
1. User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR®family of software – see below.
INSTALLING MESUR®SOFTWARE
Mark-10 o󰀨ers three data collection applications:
MESUR®Lite
Free basic data acquisition application, for data tabulation and exporting to Excel.
Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-congurable start and
stop triggers and other tools. Compatible with gauges and test stands for load
vs. time or load vs. travel. MESUR®gauge Plus adds test stand motion control
coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
www. .com [e-mail]1.800.561.8187