ITW Linx SurgeGate MCO4 Instruction sheet

Part#: 2800-010-30I 08/2021 (Rev. 9) AMPI #127 © Copyright 2021 ITW Linx
• MCO4
• MCO4X4
• MCO4110
• MCO8110
• MDS25
• CAT6-LAN
• CAT6-LAN-RJ45
• CAT6-75
• CAT6A-75/POE-RJ45
• CAT6AS-75/POE-RJ45
• CAT6-75/POE-RJ45
• CAT6-235
• CAT6-235-RJ45
• Do not install this device if there is not at least 10 meters (30 feet)
or more of wire between the electrical outlet and the electrical
service panel.
• Risk of Electric Shock. Do not plug into another relocatable power
tap, or an extension cord.
• Do not use any other "power-strips".
• Do not use 2-prong adapters with this product.
• If they are digital key sets (e.g. full feature phones with LCD displays), an
MDS25 module should be used.
ITW Linx offers a 5 Year Product Warranty and Connected Equipment
Warranty on all SurgeGate products. Please visit us at www.itwlinx.com
for up-to-date warranty information.
CAT6-75
PC’s, voicemail systems, operator consoles, etc.
Connect the fax and telephone answering device lines from the KSU through
a SurgeGate module. This will prevent any “backdoor” power problems or
rise in ground potential from reaching the KSU via lines from other
equipment in the building.
CAT6/CAT6A module as a primary protector,
To ground a CAT6/CAT6A module used in a primary
protection application, follow the specific instructions on page 3.
CAT6-LAN
CAT6A-75
/POE-RJ45
CAT6A-75
/POE-RJ45
CO/4
CO/4-110
CO/4x4
5 year
CAT6A-75
/POE-RJ45

A.) SurgeGate CAT-6 or CAT6A (Models: CAT6-LAN, CAT6-75, CAT6-235,
CAT6A-LAN, CAT6A-75)
SurgeGate CAT6/CAT6A
These models protect one 8-wire CAT6/CAT6A cable using 110 connectors.
B.) SurgeGate CAT6 and CAT6A Modules (Models: CAT6-LAN-RJ45,
SurgeGate CAT6/CAT6A
CAT6-75/POE-RJ45, CAT6-235-RJ45, CAT6A-75/POE-RJ45,
CAT6AS-75/POE-RJ45)
These models protect one 8-wire CAT6 or CAT6A cable using RJ45 connectors.
1. Simply plug the RJ45 jack from the line input cable into the “Line” side of
the protector.
2. Using a CAT6 or CAT6A (or better) patchcord, plug one end into the
“Equipment” side of the protector and the other side of the patchcord into the
equipment to be protected.