Ivation GDM20 User manual

MINI DEHUMIDIFIER
User Manual
Introduction
Thank you for purchasing our Mini Dehumidifier, and
welcome to the Ivation™ family. This user manual is meant
to oer you a brief walkthrough of the device’s features
and usage protocols. We hope you find this manual helpful.
For additional information and technical support, please
feel encouraged to contact our help team at
[email protected].
Box Contents
1 x Mini Dehumidifier
1 x Water Tank
1 x Power Cord
1 x User Manual
Parts & Controls
Important Instructions
Intended Use
This device is intended for use in the removal of excess
moisture from smaller rooms such as studies, walk-in closets
and bathrooms. Other than the removable water tank, this
device is not user serviceable and should not be
disassembled. Any use other than that described above
will lead to damage to the product and may present
additional risks.
How Does it Work?
The Mini Dehumidifier works by way of thermoelectric
cooling, which uses what’s known as the Peltier eect to
create a heat flux between the junction of two dierent types
of materials. Using no compressors or moving parts, the
device pulls moisture from the air around it, removing
muskiness and dampness from the room.
Safety Instructions
If damage is incurred as a result of non-compliance with these
operating instructions, manufacture’s guarantee will be voided.
Ivation™ assumes no liability for personal injury or damage to
property caused by incorrect handling or non-observance of
the safety instructions.
1. Keep unit in upright position whenever in use.
2. To avoid electric shock, avoid opening unit.
3. Always turn device o when not in use.
4. Avoid using power adapter in excessively wet area.
5. Ensure that inlet and outlet grilles are unobstructed.
6. Keep device away from reach of children.
Operation
Basics:
- To remove excess moisture from small rooms, place Mini
Dehumidifier in preferred area.
- Insert smaller end of AC/DC Power Adapter (#11) into DC
Power Socket (#10).
- Connect other end to wall socket.
- Toggle On/O Switch (#3) to On position.
- To turn unit o at any time, toggle On/O Switch (#3) to O
position first, then unplug DC Power Adapter (#11).
Emptying Water Tank:
- The Mini Dehumidifier will automatically turn o once tank
is full.
- The Yellow “Full” LED (#2) will turn on.
- Before removing water tank, toggle On/O Switch (#3) to
O position.
- Insert two fingers into Pull-Out Opening (#7) and gently pull out.
- Pull out plug from Water Displacement Hole (#8).
- Pour collected water out from tank into sink or toilet.
- Reinsert plug and slide tank back into device until it clicks.
- Device is now ready for use again.
Technical Specifications
Capacity: Approximately 8.5 Ounces/Day at 86°F, 80% RH
Water Tank Capacity: 17 Ounces
Cooling Element: Thermoelectric Peltier Module
Fan: 80mm x 80mm Brushless Motor
Power Adapter: 9v DC 2.5Amp
Power Consumption: 22.5w
Water Level Detector: Auto-O When Full w/Yellow “Full” LED
Working Environment: Over 59°F, Over 40% RH
Dimensions: 6.06” x 8.58” x 5.11”
Cord Length: 40” (3’ 4”)
Maintenance
Always turn Mini Dehumidifier o and disconnect power cord
before cleaning unit. Use a piece of soft cloth to clean product
surface, or use soft-bristled brush to wipe dust o air inlet grills.
7. Pull-Out Opening
8. Water Displacement
Hole w/Plug
9. Hydraulic Cut-O
10. DC Power Socket
11. AC/DC Power Adapter
1. Green “On” LED
2. Yellow “Full” LED
3. On/O Switch
4. Air Inlet Grill
5. Dry Air Outlet Grill
6. Removable Water Tank
1
3
4
5
6
8
9
7
10
11
2
Distributed by
C&A Marketing, Inc.
2 Bergen Turnpike
Ridgefield Park, NJ 07660
[e-mail]
MADE IN CHINA
IVATION is a trademark of
C&A IP Holdings, LLC
©2014 All Rights Reserved
IVATION HOME
ITEM# IVAGDM20