
5
DC AUX ON OFF
power source
mains power
• This unit operates with a DC 9V 2A mains adapter (included).
To the
mains socket
• Connecting the unit to any other power source may cause damage to the unit. Unwind
the mains adapter to its full length. Connect the mains adapter to the DC socket on the
rear of the unit and a mains socket. Make sure the mains adapter is fully inserted into the
mains socket. The unit is now connected and ready to use.
• To switch the unit o completely, switch the ON/OFF switch at the rear of the unit to the
OFF position and / or unplug the mains adapter from the mains socket.
general operation
switching the unit On / O and selecting a function
• Switch the ON/OFF switch at the rear of the unit to the ON position. The unit will be in
STANDBY mode.
• Press and hold the / button to turn on the unit. The LED indicator will light up blue
(Bluetooth mode) or red (AUX mode).
• To completely turn the unit o, switch the ON/OFF switch at the rear of the unit to the
OFF position and then disconnect the unit from the mains socket.
If the unit is idle for more than 10 minutes, it will automatically switch to standby mode. Press
and hold the / button to switch on the unit again.
selecting a mode
Press and hold the / button to switch between the Bluetooth (LED will light up blue)
and AUX modes (LED will light up red).
adjusting the volume
Press VOL +/– to adjust the volume.
iBT1412_IB_120821_Zell.indd 5 22/8/12 11:06 AM